1. Introduction
Thank you for choosing the HXFAFA Wall-Mounted Folding Table. This product is designed to provide a versatile and space-saving surface for various applications in your home or office. Please read this manual carefully before installation and use to ensure proper assembly, safe operation, and optimal performance.
Product Features:
- Space-Saving Design: Easily folds against the wall when not in use, ideal for small spaces.
- Durable Construction: Made from Medium Density Fiberboard (MDF) with piano paint finish, supported by stainless steel triangle brackets.
- Versatile Use: Suitable as a kitchen workbench, dining table, cafe table, desk, laundry table, or for various other purposes.
- Sturdy Support: Designed to bear significant weight when properly installed.
2. Safety Information
Always prioritize safety during installation and use. Failure to follow these instructions may result in injury or damage to the product or property.
- Ensure the wall surface is suitable for mounting. This table must be securely fastened to solid wood studs, brick, or concrete walls. Do not install on drywall alone without proper anchors into studs.
- Verify that all screws and hardware are tightened before use. Regularly check for loose connections.
- Do not exceed the maximum weight capacity of 90 pounds (approximately 40 kg).
- Keep children away from the table during folding and unfolding to prevent pinching or injury.
- Avoid placing hot items directly on the table surface without protection.
3. Package Contents
Please check that all components are present before beginning assembly:
- Folding Tabletop (MDF with Piano Paint)
- Stainless Steel Triangle Brackets (2 units)
- Expansion Plugs
- Bold Screws
- Installation Hardware (additional screws, etc.)
If any parts are missing or damaged, please contact customer support.
4. Setup and Installation
The following steps outline the installation process for your wall-mounted folding table. Basic tools such as a drill, screwdriver, level, and measuring tape are required.
Installation Steps:
- Prepare the Wall: Ensure the wall surface is clean and clear. Identify suitable mounting points (wood studs, solid brick, or concrete).
- Determine Installation Location: Use a level and measuring tape to mark the desired height and position for the brackets on the wall. Ensure the table will be level when unfolded.
- Fixing Screws: Drill pilot holes at the marked locations. Insert expansion plugs if necessary (for brick/concrete). Secure the brackets to the wall using the provided bold screws. Ensure they are firmly tightened.
Image: Step-by-step guide for mounting the brackets to the wall.
- Fixed Completion: Once both brackets are securely mounted, double-check their stability.
- Fix the Board: Align the tabletop with the brackets. Secure the tabletop to the brackets using the appropriate screws.
- Installation is Complete: Test the table by gently applying pressure to ensure it is stable and securely attached to the wall.
Image: Detailed view of the triangle stable bracket, expansion plugs, and bold screws.
Product Dimensions:
Image: Visual representation of the table's dimensions (Length: 50cm/20in, Width: 30cm/12in).
5. Operating Instructions
Folding and Unfolding the Table:
- To Unfold: Gently pull the tabletop downwards until it locks into a horizontal position. Ensure both brackets are fully extended and locked.
- To Fold: Locate the release mechanism on each bracket (usually a lever or button). Press or pull the mechanism to disengage the lock, then gently lift the tabletop upwards until it rests flush against the wall.
Image: The table shown in both its unfolded and folded states, highlighting its space-saving design.
6. Maintenance
Regular maintenance will help prolong the life of your folding table.
- Cleaning: Wipe the table surface with a soft, damp cloth. For stubborn stains, use a mild, non-abrasive cleaner. Avoid harsh chemicals that may damage the piano paint finish.
- Hardware Check: Periodically inspect all screws and connections to ensure they remain tight. Re-tighten if necessary.
- Edge Sealing: The product features a standard edge sealing process. This design prevents cracks or damage under normal use.
7. Troubleshooting
- Table is not stable:
- Ensure all wall mounting screws are fully tightened.
- Verify that the brackets are securely locked in the unfolded position.
- Confirm that the table is mounted to a suitable, sturdy wall structure.
- Difficulty folding or unfolding:
- Check the bracket hinges for any obstructions or debris.
- Ensure the release mechanism is fully engaged or disengaged as required.
8. Specifications
| Product Name | Wall-Mounted Folding Table |
| Brand | HXFAFA |
| Model | 50*30cm/20*12in |
| Color | White |
| Material | Medium Density Fiberboard (MDF), Piano Paint, Stainless Steel Triangle Bracket, Hardware |
| Weight Capacity | Up to 90 lbs (approx. 40 kg) |
| Manufacturer | ZZNHL |
| First Available Date | August 7, 2021 |
Image: Demonstrates the table's practical use and structural integrity, highlighting its thickened sheet and strong bearing capacity of up to 60kg (132lb).
Image: Illustrates the rounded corner design of the table, intended for smoother aesthetics and bump prevention.
9. Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact the retailer where you purchased this item. Keep your purchase receipt for any warranty claims.
