1. Introduction
Thank you for choosing the CLP Tanna Velvet Dining Chair. This manual provides essential information for the safe assembly, proper use, and effective maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.
The CLP Tanna chair is designed for optimal seating comfort, featuring a padded seat, comfortable armrests, and a backrest with an elegant quilted velvet upholstery. Its robust metal frame ensures stability and durability.
Image 1.1: The CLP Tanna Velvet Dining Chair in blue, showcasing its design and velvet upholstery.
2. Safety Instructions
- Maximum Load Capacity: This chair is designed to support a maximum weight of 150 kg (approximately 330 lbs). Do not exceed this limit to prevent damage or injury.
- Stable Placement: Always place the chair on a flat, stable surface. Ensure all legs are in full contact with the floor before use.
- Floor Protection: The robust metal frame is equipped with floor protectors to prevent slipping and protect your flooring (tiles, parquet, laminate) from scratches.
- Children: Keep children away from the assembly area. Small parts can be a choking hazard.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
Image 2.1: Maximum weight capacity of 150 kg.
Image 2.2: Chair legs equipped with floor protectors.
3. Package Contents
Before beginning assembly, please ensure all parts are present and undamaged. If any parts are missing or damaged, do not proceed with assembly and contact customer support.
- Chair Seat with Backrest and Armrests (1x)
- Chair Leg Frame (1x)
- Assembly Hardware (screws, washers, Allen key)
- Instruction Manual (this document)
4. Setup and Assembly
Assembly of the CLP Tanna chair is generally straightforward, but requires careful attention to detail. It is recommended to assemble the chair on a soft, clean surface to prevent scratching the components or your floor.
- Unpack Components: Carefully remove all parts from the packaging. Check against the package contents list.
- Attach Leg Frame: Align the leg frame with the mounting points on the underside of the chair seat.
- Secure with Screws: Insert the provided screws and washers into the designated holes. Hand-tighten all screws initially.
- Final Tightening: Once all screws are in place, gradually tighten them using the Allen key. Ensure all connections are firm and secure, but do not overtighten.
- Stability Check: Gently rock the chair to ensure it is stable and level. If it wobbles, check the tightness of all screws and adjust as needed.
Note: Some users have reported issues with screw length during assembly. If you encounter this, please contact customer support for assistance.
Image 4.1: Visual representation of assembly and care instructions.
5. Operating and Usage
The CLP Tanna Velvet Dining Chair is designed for comfortable seating in dining areas, living rooms, or offices. Its ergonomic shape and padded upholstery provide a pleasant seating experience even for extended periods.
- Intended Use: This chair is intended for indoor use only.
- Seating Posture: Sit centrally on the seat with your back against the backrest for optimal support.
- Movement: Avoid standing on the chair or using it as a step stool. Do not lean excessively on the backrest or armrests, as this may compromise stability.
Image 5.1: The CLP Tanna chairs integrated into a dining room setting.
6. Maintenance and Care
The CLP Tanna chair is designed for easy maintenance due to its treated materials. Proper care will help preserve its appearance and extend its lifespan.
- Cleaning Upholstery: For general cleaning, simply wipe the velvet upholstery with a damp cotton cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the fabric.
- Spills: In case of spills, blot immediately with a clean, dry cloth. Do not rub, as this can spread the stain.
- Frame Cleaning: Wipe the metal frame with a soft, damp cloth. Dry thoroughly to prevent rust.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the velvet fabric to fade. Position the chair away from direct sunlight if possible.
Image 6.1: Close-up view of the chair's velvet fabric texture.
7. Troubleshooting
- Chair Wobbles: Ensure all assembly screws are fully tightened. If the issue persists, disassemble and reassemble, ensuring all parts are correctly aligned.
- Difficulty During Assembly: If screws do not fit or seem too short, double-check that you are using the correct screws for the designated holes. If the problem persists, contact customer support for replacement parts.
- Squeaking Noises: Squeaking can often be resolved by tightening all screws. If the noise continues, apply a small amount of silicone spray to the joints.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | CLP-Tanna (316861) |
| Brand | CLP |
| Color | Blue |
| Material | Velvet upholstery, Metal frame |
| Overall Height | 83 cm (32.7 inches) |
| Overall Width | 58 cm (22.8 inches) |
| Overall Depth | 62 cm (24.4 inches) |
| Seat Height | 46 cm (18.1 inches) |
| Seat Surface (W x D) | 54 x 45 cm (21.3 x 17.7 inches) |
| Backrest Height | 41 cm (16.1 inches) |
| Armrest Height | 18 cm (7.1 inches) |
| Weight | 7 kg (15.4 lbs) |
| Max. Load Capacity | 150 kg (330 lbs) |
Image 8.1: Detailed dimensions of the CLP Tanna Velvet Dining Chair.
9. Warranty and Support
For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Information regarding spare parts availability is currently not provided.
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact the seller or manufacturer directly through the platform where the purchase was made. Please have your order details and product model number (CLP-Tanna or 316861) ready when contacting support.
