1. Product Overview
The Techage Solar Battery Powered Metal Fake Security Camera is designed to provide a visual deterrent against potential intruders, mimicking the appearance and some functionalities of a real security camera. It features solar charging, motion-activated floodlights, and a realistic design to enhance your property's perceived security without the complexity or cost of a full surveillance system.
Image: Two white Techage fake security cameras with integrated solar panels, designed to look like real surveillance equipment.
Key Features:
- Realistic Appearance: Designed to closely resemble actual security cameras, complete with a dummy antenna and a flashing red LED light.
- Motion-Activated Floodlights: Equipped with 8 LED floodlights that automatically turn on for 20 seconds when motion is detected within 28-32 feet at night, providing an 800 lumen super brightness.
- Solar Powered: Features a built-in solar panel for continuous charging, eliminating the need for wiring or battery replacement.
- Easy Installation: No complex wiring required; mounts easily to walls, ceilings, or other surfaces with included screws and a drilling template.
- Durable & Weatherproof: Constructed with a metal casing and IP66 waterproof and dustproof performance, suitable for outdoor use in temperatures ranging from -20°F to 160°F.
2. Setup and Installation
Follow these steps for optimal placement and installation of your Techage Fake Security Camera:
- Choose Location: Select a prominent outdoor location where the camera will be visible to deter potential intruders. Ensure the solar panel receives ample direct sunlight throughout the day for efficient charging.
- Prepare for Mounting: Use the provided drilling template to mark the screw holes on your desired mounting surface (wall, ceiling, etc.).
- Drill Holes: Pre-drill holes at the marked locations.
- Attach Base: Secure the camera's mounting base to the surface using the included screws.
- Adjust Angle: Adjust the camera and solar panel to the desired angle. The camera offers 360° rotation and 90° tilt, while the solar panel can be adjusted 150° for optimal sun exposure.
- Attach Antenna: Screw the dummy antenna onto the designated port on either side of the camera for a more realistic appearance.
Image: Detailed diagram illustrating the components and dimensions of the Techage fake security camera, including the solar panel, dummy antenna, LED lights, PIR motion sensor, and red LED light.
Image: Illustration demonstrating the adjustable angles of the camera body (360° rotation, 90° tilt) and the solar panel (150° adjustment) for flexible positioning.
Installation Video:
Video: An unboxing and installation overview of the Techage Solar Powered Floodlights Dummy Camera, demonstrating its components and ease of setup.
3. Operating Instructions
The Techage Fake Security Camera operates autonomously once installed and charged. Its primary functions are to deter and illuminate.
Solar Charging:
- The integrated solar panel charges the internal battery during daylight hours. Ensure the panel is positioned to receive maximum direct sunlight.
- No manual charging or battery replacement is typically needed under normal sunlight conditions.
Image: A visual representation of the 800 lumen super brightness provided by the floodlights, illuminating a path at night.
Motion-Activated Floodlights:
- At night, the built-in PIR motion sensor detects movement within a range of 28-32 feet.
- Upon detection, the 8 LED floodlights will automatically activate, providing 800 lumens of bright illumination for approximately 20 seconds.
- The floodlights will turn off automatically after 20 seconds if no further motion is detected.
Image: A sequence of illustrations demonstrating the camera's operational modes: standby with a red light, motion detection activating the floodlight, and the floodlight turning off after a set period.
Flashing Red LED:
- A small red LED light on the camera will flash continuously in standby mode, simulating the recording indicator of a real camera.
Operation Demonstration:
Video: A short demonstration of the fake camera's motion-activated floodlight turning on at night as a person approaches.
4. Maintenance
To ensure the longevity and optimal performance of your Techage Fake Security Camera, consider the following maintenance tips:
- Clean Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris that may obstruct sunlight and reduce charging efficiency.
- Inspect Mounting: Regularly check the mounting screws and bracket to ensure the camera remains securely attached, especially after severe weather conditions.
- Weather Resistance: The camera is IP66 waterproof and designed to withstand various weather conditions. However, extreme conditions may still impact performance.
Image: The fake security camera shown in a rainy environment, highlighting its IP66 waterproof and dustproof capabilities.
5. Troubleshooting
If you encounter any issues with your fake security camera, try the following troubleshooting steps:
- Floodlights Not Activating:
- Ensure the camera's solar panel is receiving sufficient direct sunlight for charging. A full day of sunlight is typically needed for optimal night operation.
- Verify that the motion sensor is not obstructed.
- Test the motion sensor by walking within its detection range (28-32 ft) at night.
- Red LED Not Flashing:
- Confirm the camera has been exposed to adequate sunlight for charging.
- Check if the power button (if present and accessible) is in the 'on' position.
- Camera Appears Less Realistic:
- Ensure the dummy antenna is securely attached.
- Clean the camera lens and body to remove any dirt or grime that might diminish its realistic appearance.
For persistent issues, please refer to the support section.
6. Specifications
| Feature | Detail |
|---|---|
| Model Number | SL669W |
| Power Source | Solar Powered, Battery Powered |
| Floodlight Brightness | 800 Lumens (8 LED lights) |
| Motion Detection Range | Up to 32 Feet |
| Waterproof Rating | IP66 |
| Operating Temperature | -20°F to 160°F |
| Dimensions (L x W x H) | 11.4 x 8.6 x 3.9 inches |
| Item Weight | 1.5 Pounds |
| Field Of View | 120 Degrees |
| Manufacturer | Tinosec |
| UPC | 777647460664 |
7. Warranty and Support
Warranty Information:
Specific warranty details for the Techage Solar Battery Powered Metal Fake Security Camera should be obtained directly from the manufacturer or your point of purchase. Please retain your proof of purchase for any warranty claims.
Customer Support:
Techage offers free technical support for their products. For assistance with installation, operation, or troubleshooting, please contact Techage customer service. You may also find useful resources and FAQs on the official Techage brand store or through the VicoHome App, which is associated with Techage products.
Free Technical Support
VicoHome App Support
