1. Introduction
This manual provides instructions for the ESR MagSafe Sticker 360 Universal Magnetic Ring. This product is designed to add MagSafe compatibility to your existing phone case, enabling the use of MagSafe accessories and enhancing wireless charging capabilities.
The MagSafe ring is constructed from metal and is not a magnet itself. It functions by providing a ferromagnetic surface for MagSafe accessories to attach to.
Image 1.1: Illustrates how the ESR MagSafe Sticker 360 integrates with a phone case to upgrade its functionality.
Image 1.2: Demonstrates the ultra-thin design of the magnetic ring, ensuring minimal bulk.
Image 1.3: Exploded view of the ring's unique layered structure, designed for optimal performance.
2. Setup and Installation
Follow these steps for proper installation of the ESR MagSafe Sticker 360 Universal Magnetic Ring:
- Prepare the Surface: Ensure the back of your phone case is clean, smooth, and flat. The ring is only compatible with PC or TPU cases without a non-slip coating.
- Use the Alignment Guide: The included alignment guide is crucial for precise placement. Insert the installation tool into your phone's charging port.
- Position the Ring: Place the alignment guide over the phone case. Select the appropriate template for your phone model (iPhone or Samsung Galaxy) to ensure correct positioning of the ring over the wireless charging coil.
- Apply the Ring: Peel off the adhesive backing from the magnetic ring. Carefully place the ring onto the designated area on the outside of your phone case, using the alignment guide.
- Secure the Ring: Press the ring firmly onto the case and hold for a few seconds to ensure strong adhesion. Wait at least 2 hours before using the phone with MagSafe accessories to allow the adhesive to fully set.
Important Note:
- The ring must be stuck on the outside of the phone case. Sticking it inside the case will affect magnetism.
- The ring is not suitable for leather phone cases, liquid silicone cases, or cases with uneven surfaces.
- Once installed, the ring can be removed but cannot be repositioned effectively.
Image 2.1: Step-by-step guide for easy application of the magnetic ring.
Image 2.2: Specific alignment instructions for Samsung Galaxy S24 series.
3. Operating Instructions
After successful installation, the ESR MagSafe Sticker 360 allows your phone case to interact with MagSafe-compatible accessories.
- Magnetic Attachment: The ring's design enhances magnetic strength, ensuring your phone remains securely attached to MagSafe chargers, wallets, and mounts.
- Optimized Wireless Charging: The ring facilitates precise alignment between your phone's charging coil and MagSafe wireless chargers, maximizing charging efficiency and enabling faster, more convenient wireless charging.
- Universal Compatibility: This ring maintains your ability to use standard Qi wireless chargers while providing access to MagSafe-compatible charging. Ensure proper alignment with standard wireless chargers to prevent overheating.
Image 3.1: Demonstrates enhanced charging efficiency with the ESR MagSafe Sticker 360.
Image 3.2: Illustrates how the ring ensures consistent alignment with MagSafe accessories.
Image 3.3: Shows compatibility with various magnetic chargers, including car mounts.
4. Maintenance
The ESR MagSafe Sticker 360 requires minimal maintenance.
- Cleaning: If the ring or your phone case becomes dirty, gently wipe it with a soft, damp cloth. Avoid harsh chemicals or abrasive materials that could damage the ring's surface or adhesive.
- Adhesion: The adhesive is designed for a permanent bond. Avoid attempting to remove and reapply the ring, as this will compromise its adhesion.
5. Troubleshooting
If you encounter issues with your ESR MagSafe Sticker 360, consider the following:
- Weak Magnetic Connection:
- Ensure the ring is applied to the outside of a smooth PC or TPU case.
- Verify that your phone case is not made of leather, liquid silicone, or has an uneven surface, as these materials are incompatible.
- Confirm the ring was installed using the alignment guide to ensure it is centered over your phone's wireless charging coil.
- Overheating During Wireless Charging:
- Ensure your phone is properly aligned with the standard wireless charger. Misalignment can lead to inefficient charging and heat generation.
- Ring Detachment:
- Ensure the case surface was clean and dry before application.
- Allow the adhesive to cure for at least 2 hours before applying stress or attaching accessories.
Image 5.1: Visual guide to incompatible case types for the magnetic ring.
6. Specifications
| Brand | ESR |
| Model Number | ring_dds_bk_2pcs_acs_odeu |
| Material | Glass fiber + Ferromagnetic steel |
| Color | Black |
| Shape | Round |
| Product Dimensions | 2.24 x 2.24 x 0.04 inches |
| Item Weight | 0.106 ounces |
| What's in the Box | Phone Ring Holder (2 pieces), Alignment Guide |
7. Warranty and Support
ESR provides comprehensive customer support for its products.
- Protection Plan: A 12-month protection plan is included with your purchase.
- Lifetime Support: Benefit from lifetime support for your ESR product.
- Resources: Detailed setup videos and FAQs are available to assist you.
- Contact: For personalized help or further inquiries, please refer to the contact information provided on the ESR official website or product packaging.
Note: No official product videos were available in the provided data to embed in this manual.
