1. Introduction
This manual provides essential information for the safe and efficient use of your UpBright 13.5V AC/DC Adapter. Please read these instructions carefully before using the product to ensure proper function and longevity. This adapter is designed to provide power and charge compatible VacLife cordless vacuum cleaners.
2. Safety Information
Always follow these safety precautions to prevent injury or damage to the product and connected devices:
- Ensure the adapter's voltage and current specifications match the requirements of your device.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not disassemble or modify the adapter. Refer all servicing to qualified personnel.
- Unplug the adapter from the power outlet when not in use or during electrical storms.
- Keep the adapter away from children.
- Ensure proper ventilation around the adapter during operation to prevent overheating.
3. Product Overview
The UpBright 13.5V AC/DC Adapter is a power supply unit designed to convert AC wall power to DC power suitable for charging and operating specific VacLife cordless vacuum cleaner models. It features built-in protection mechanisms to safeguard against electrical hazards.
Image 1: The UpBright 13.5V AC/DC Adapter, showing the main unit, power cord, and barrel connector.
Image 2: A close-up view of the UpBright AC/DC Adapter, highlighting the label with input (100-240V AC) and output (13.5V DC, 650mA) specifications.
4. Compatibility
This UpBright 13.5V AC/DC Adapter is compatible with the following VacLife cordless vacuum cleaner models and other specified devices:
- VacLife H-106, H106, VL106
- VacLife VL188, VL188-N
- VacLife H-111, VL706
- VacLife VL189 Handheld Car Cordless Vacuum Cleaner
- Compatible with power supplies: HYT-1350650, Wanji WJ-Y301251000WZ, Chanzeho CZH013135065USWH, CZHO15135065USWH (12.5V 1A, 13.5V 0.65A, 12.5VDC 1000mA, 13.5VDC 650mA)
Always verify the voltage and current requirements of your device against the adapter's specifications before connecting.
5. Setup
Follow these steps to set up your UpBright AC/DC Adapter:
- Inspect the Adapter: Before first use, visually inspect the adapter and its cable for any signs of damage. Do not use if damaged.
- Connect to Device: Insert the barrel connector of the adapter cable firmly into the charging port of your compatible VacLife vacuum cleaner.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240VAC, 50/60Hz).
- Verify Connection: Ensure both connections are secure. The vacuum cleaner should indicate charging according to its own design (e.g., an indicator light).
Image 3: This image illustrates different international outlet adapters (AU, EU, UK) that may be included for international orders, ensuring compatibility with various regional power sockets.
6. Operating Instructions
Once connected, the adapter will begin supplying power to your device. For charging, ensure the vacuum cleaner is turned off to optimize charging speed. The adapter is designed for continuous use within its specified limits.
- Charging: Connect the adapter to the vacuum cleaner and a power outlet. Allow sufficient time for the vacuum cleaner's battery to fully charge as indicated by the device's own charging status lights.
- Powering: For models that can operate directly from AC power, connect the adapter as described in the setup section.
7. Maintenance
Proper maintenance ensures the longevity and safe operation of your adapter:
- Cleaning: Disconnect the adapter from the power source and the device before cleaning. Use a dry, soft cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid tightly winding the cable to prevent damage.
- Cable Care: Do not bend, twist, or pull the cable excessively, especially near the connectors, as this can cause internal damage.
8. Troubleshooting
If you encounter issues with your UpBright AC/DC Adapter, consider the following:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging/powering on | Loose connection, incompatible device, faulty power outlet, adapter malfunction. | Ensure all connections are secure. Verify device compatibility. Test the power outlet with another appliance. If issues persist, the adapter may be faulty. |
| Adapter feels hot during use | Normal operation heat, poor ventilation, excessive load, internal fault. | A slight warmth is normal. Ensure the adapter is in a well-ventilated area. If it becomes excessively hot to touch, disconnect immediately and cease use. This could indicate an internal fault or an incompatible device drawing too much power. |
| No indicator light on vacuum cleaner | Adapter not supplying power, vacuum cleaner issue, or vacuum cleaner does not have an indicator light. | Confirm the adapter is plugged into a live outlet and securely connected to the vacuum. Refer to your vacuum cleaner's manual for expected charging indications. |
If troubleshooting steps do not resolve the issue, discontinue use and contact customer support.
9. Specifications
| Specification | Value |
|---|---|
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 13.5VDC |
| Output Current | 650mA (0.65A) |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | 3 x 2 x 1 inches |
| Item Weight | 2.39 ounces |
| Connector Type | Barrel Connector |
| Compatible Devices | Vacuum Cleaner (VacLife H-106, VL106, VL188-N, H-111, VL706, VL189) |
| Included Components | 1 AC Adapter |
| Safety Certification | CE, CCC, ROHS, UL (Specification Met) |
10. Warranty and Support
This UpBright product comes with a warranty to ensure your satisfaction and product reliability:
- Refund Policy: UpBright offers a 30-day refund policy from the date of purchase.
- Exchange Policy: UpBright provides a 24-month exchange policy for defective units.
- Customer Support: For any questions, concerns, or warranty claims, please contact UpBright customer service through the retailer where the product was purchased or refer to the contact information provided with your purchase.
