1. Introduction
This manual provides essential information for the assembly and care of your nanoblock Dragon Ball Z Trunks Character Collection Series Building Kit. Please read these instructions carefully before beginning assembly to ensure a correct and enjoyable building experience. This kit allows you to construct a detailed micro-sized figure of Trunks from the Dragon Ball Z series.
2. Safety Information
WARNING: CHOKING HAZARD - Small Parts. Not for children under 3 years.
This product contains very small parts which can pose a choking hazard. Keep all components out of reach of small children and pets. The manufacturer recommends this product for ages 13 years and up due to the intricate nature of the small blocks.
3. What's in the Box
Your nanoblock Dragon Ball Z Trunks Building Kit package should contain the following items:
- nanoblock - Trunks [Dragon Ball Z] Character Collection Series Building Kit (110 pieces)
- Detailed step-by-step instruction sheet

4. Assembly Instructions
The nanoblock Trunks kit is designed for an engaging building experience. The kit includes a detailed, step-by-step instruction sheet. Follow these general guidelines for successful assembly:
- Preparation: Open the package and carefully empty all nanoblock pieces onto a clean, flat surface. It is recommended to sort the pieces by color and shape to facilitate the building process.
- Follow the Instructions: Refer to the included instruction sheet. Each step will illustrate which blocks to use and where to place them. Pay close attention to the orientation of the blocks.
- Layer by Layer: nanoblock models are typically built layer by layer from the base upwards. Ensure each layer is securely connected before proceeding to the next.
- Small Pieces: Be mindful of the extremely small size of nanoblocks (as small as 4mm x 4mm x 5mm). Using tweezers (not included) can assist with precise placement.
- Verification: After completing each major section or the entire model, compare your build with the images in the instruction manual to ensure accuracy.



5. Product Specifications
| Brand | nanoblock |
| Model Number | NBDB_015 |
| Character | Trunks (Dragon Ball Z) |
| Number of Pieces | 110 |
| Assembled Height | Approximately 2.2 inches (5.6 cm) |
| Product Dimensions | 1.14 x 1.57 x 2.28 inches (2.9 x 4.0 x 5.8 cm) |
| Item Weight | 1.02 ounces (29 grams) |
| Recommended Age | 13 years and up |
| Manufacturer | Kawada |
6. Care and Maintenance
To maintain the quality and appearance of your nanoblock model:
- Cleaning: Dust the model gently with a soft brush or a dry cloth. For more thorough cleaning, use a slightly damp cloth and mild soap, then rinse and air dry completely. Avoid harsh chemicals.
- Storage: Store the assembled model or loose blocks in a cool, dry place away from direct sunlight to prevent discoloration or material degradation.
- Handling: Handle the assembled model with care, especially when moving it, as small connections can be delicate.
7. Troubleshooting
- Missing Pieces: If you believe a piece is missing, first double-check the packaging and your work area. Due to the small size, pieces can be easily overlooked. If a piece is genuinely missing, contact nanoblock customer support.
- Difficulty Assembling: If you encounter difficulty, re-examine the instruction sheet carefully. Ensure you are using the correct pieces and placing them in the correct orientation. Sometimes, taking a short break and returning to the build can help.
- Loose Connections: Ensure blocks are pressed firmly together to create secure connections.
8. Warranty and Support
Warranty information for nanoblock products is typically provided with the product packaging or can be found on the official nanoblock website. For customer support, inquiries about missing parts, or further assistance, please refer to the contact information provided by Kawada or nanoblock on their official channels. Ensure you are purchasing an officially licensed Kawada product, identifiable by a Bandai Namco warning label on the product box.