Manuals+

Power pod 19011

Power pod Keychain Phone Charger

Model: 19011

1. Introduction

Thank you for purchasing the Power pod keychain phone charger. This compact and lightweight device is designed to provide an emergency power boost for your mobile phone when you are on the go. It conveniently attaches to your keychain, ensuring you always have a backup power source readily available.

Power pod Keychain Phone Charger packaging showing 'Emergency Charge When You Need It!' and 'Pre-charged' labels.

Image 1.1: Front packaging of the Power pod, highlighting its emergency charging capability and pre-charged status.

Back packaging of Power pod showing features like retractable charging tip, charging port, keychain loop, and durability, along with use cases for keychains, purses, and backpacks.

Image 1.2: Rear packaging illustrating key features and versatile carrying options for the Power pod.

2. What's Included

Your Power pod package includes the following items:

  • 1 x Power pod Keychain Phone Charger
  • 1 x Charging Cable (USB to Micro-USB)
  • 1 x Quick Connect Keychain Clip
Instruction sheet showing 'WHAT'S INCLUDED' section with illustrations of the Power pod, charging cable, and quick connect keychain clip.

Image 2.1: Diagram showing all components included in the Power pod package.

3. Setup

The Power pod comes partially charged and ready for immediate emergency use. For optimal performance and full 2+ hour power, it is recommended to fully charge the device before its first use.

Initial Charging

  1. Ensure the Power pod's switch is in the OFF position.
  2. Connect the micro-USB tip of the provided charging cable into the charging port on the side of the Power pod.
  3. Plug the USB end of the cable into a power adapter (not included) or a computer's USB port.
  4. The indicator light on the Power pod will blink while charging and will remain solid when fully charged. A full charge typically takes approximately 90 minutes.

4. Operating Instructions

4.1. Using the Power pod to Charge Your Phone

  1. Slide out the charging tip from the Power pod.
  2. Plug the charging tip directly into your mobile device's charging port. The Power pod is compatible with both Android devices (Micro USB) and iPhone devices (Lightning connector, depending on the model purchased).
  3. The Power pod will begin charging your device.
Instruction sheet showing 'USE' section with an illustration of sliding out the charging tip and plugging it into a mobile device.

Image 4.1: Visual guide for connecting the Power pod to a mobile device.

4.2. Recharging the Power pod

Refer to the