LEDENET LED Strip Lights User Manual

1. Introduction

Thank you for choosing LEDENET LED Strip Lights. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED strip lights. These high-density, waterproof LED strips are designed for bright and uniform illumination in various indoor and outdoor settings.

Safety Warnings

• Ensure the power supply is DC 12V and has a wattage higher than the connected LED strip to prevent damage and ensure optimal performance.
• Do not use these lights underwater, despite their IP67 waterproof rating. IP67 protects against dust and temporary water splashes, not continuous submersion.
• Always disconnect power before installation or maintenance.
• Do not bend the strip sharply or apply excessive force, as this may damage the LEDs or circuitry.
• Keep out of reach of children. The low voltage is touchable and harmless, but proper installation is crucial.

2. Package Contents

The package includes the following items:

• 1 x 5-meter (16.4ft) 2835 SMD Double Row Flexible LED Strip with 2400 LEDs

Note: DC 12V power supply, LED controller, and end caps are not included and must be purchased separately. For compatible end caps, refer to ASIN: B00NM7C8MG.

3. Specifications

4. Setup and Installation

Follow these steps for proper installation of your LED strip lights:

1. Prepare the Surface: Ensure the installation surface is clean, dry, and smooth. Since the IP67 double-row sleeve is heavy, this LED strip does not come with double-sided adhesive. You will need to use appropriate mounting clips, channels, or adhesive suitable for the weight and surface.
2. Plan the Layout: Determine the desired length and path for your LED strip.
3. Cutting the Strip (Optional): If a shorter length is required, the LED strip can be cut at designated cutting marks, which are located every 6 LEDs. Use sharp scissors to ensure a clean cut.
   

   Image: Close-up of the LED strip indicating the 17mm width and the designated cut marks. The red wire is V+ and the black wire is W (White).

4. Connect Power Supply: Connect the LED strip to a compatible DC 12V power supply. The power supply's wattage must be higher than the total wattage of the connected LED strip (144W per 5M reel).
   

   Image: A diagram illustrating the connection sequence: DC 12V Transformer to DIM LED Controller, and then to the 16.4ft LED Strip. Note that the transformer and LED controller are not included.

5. Secure the Strip: Use appropriate mounting hardware (not included) to secure the LED strip firmly to the prepared surface.
6. Test Functionality: Once installed, connect the power supply to an electrical outlet and test the LED strip to ensure it functions correctly.

5. Operating Instructions

Your LEDENET LED Strip Lights are designed for simple operation:

• Power On/Off: Once connected to a power supply, the lights will illuminate. Use an external switch or controller (not included) to turn the lights on or off.
• Dimming: These LED strips are dimmable from 0-100%. To utilize the dimming feature, you must connect the strip to a compatible DC 12V dimmable LED controller (not included). The controller typically allows adjustment via buttons or a remote control.
• Color Temperature: This specific model provides a Cold White (6500K) light, offering a bright, daylight-like illumination.

Image: A coiled LED strip light emitting a bright cold white light, showcasing its high density and uniform illumination.

6. Maintenance

Proper maintenance ensures the longevity and performance of your LED strip lights:

• Cleaning: Periodically clean the surface of the LED strip with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure the strip is completely dry before reconnecting power. Do not use harsh chemicals or abrasive cleaners.
• Waterproof Protection (IP67): The silicone sleeve provides IP67 protection, making the strip resistant to dust and temporary water splashes. This makes it suitable for outdoor, indoor, humid, and dusty environments. However, it is crucial to remember that it cannot be used underwater or submerged for extended periods.
  

  Image: A coiled LED strip light with water droplets, illustrating its IP67 waterproof capability against splashes.

• Inspection: Regularly inspect the strip for any signs of damage, such as cuts, cracks, or loose connections. Address any issues promptly to prevent further damage or safety hazards.

7. Troubleshooting

If you encounter issues with your LED strip lights, refer to the following common problems and solutions:

8. Warranty and Support

For warranty information or technical support, please contact LEDENET customer service through the retailer where the product was purchased or visit the official LEDENET store online.

Manufacturer: LEDENET

Country of Origin: China

Date First Available: July 29, 2021

For additional products and accessories, visit the LEDENET Store on Amazon.