EASWEL LED Light Bulb Instruction Manual

1. Product Overview

The EASWEL BA15D LED Light Bulb is designed as a high-efficiency replacement for traditional bulbs in compatible Kenmore sewing machines. This bulb offers superior brightness, extended lifespan, and reduced power consumption compared to incandescent alternatives.

Image: A close-up view of the EASWEL BA15D LED light bulb. It features a silver BA15D bayonet base with two offset pins and a clear cylindrical housing containing multiple rows of small, bright yellow LED chips.

Key Advantages:

• High Brightness: Provides ample illumination for your sewing area.
• Long Life: Engineered for over 30,000 hours of operation, reducing the need for frequent replacements.
• Low Power Consumption: Energy-efficient 3W design helps save electricity.
• Vibrant Color: Delivers a clear white light (6000~6500K).
• Simple to Install: Direct replacement for BA15D base bulbs.

2. Specifications

3. Setup and Installation

Follow these steps to safely install your new EASWEL LED light bulb in your Kenmore sewing machine:

1. Safety First: Before beginning, ensure your sewing machine is unplugged from the power outlet to prevent electrical shock.
2. Locate Bulb Housing: Identify the light bulb housing on your sewing machine. This is typically located near the needle area.
3. Remove Old Bulb: Gently push the old bulb into its socket and twist counter-clockwise to release it. Carefully pull the bulb straight out. Allow the old bulb to cool if it was recently in use.
4. Insert New Bulb: Align the two pins on the base of the new EASWEL LED bulb with the slots in the sewing machine's bulb socket. Push the bulb gently into the socket and twist clockwise until it locks into place. Ensure it is seated firmly.
5. Test: Plug your sewing machine back into the power outlet and turn on the machine's light switch to confirm the new bulb is working correctly.

Note: If the bulb does not light up, ensure it is fully seated and twisted into the socket. Refer to the Troubleshooting section if issues persist.

4. Operating Instructions

Once the EASWEL LED light bulb is installed, its operation is integrated with your sewing machine's existing light control. Simply turn on the power switch or the dedicated light switch on your Kenmore sewing machine to illuminate your work area.

5. Maintenance

The EASWEL LED light bulb requires minimal maintenance due to its long lifespan and durable design.

• Cleaning: If the bulb becomes dusty, ensure the sewing machine is unplugged and the bulb is cool. Gently wipe the bulb's clear housing with a soft, dry cloth. Do not use liquid cleaners.
• Replacement: The bulb is designed for over 30,000 hours of use. Replacement is only necessary if the bulb ceases to function. Follow the installation steps in Section 3 for replacement.

6. Troubleshooting

If your EASWEL LED light bulb is not functioning as expected, consider the following common issues and solutions:

7. Warranty and Support

EASWEL stands behind the quality of its products. This LED light bulb comes with the following guarantees:

• 30 Days Money Back Guarantee: If you are not satisfied with your purchase within 30 days, you may be eligible for a full refund.
• 180 Days - Free Exchange: For any defects or issues arising within 180 days of purchase, a free exchange will be provided.

For any questions, concerns, or support inquiries, please contact EASWEL customer service. We are committed to resolving any issues to your satisfaction.