Hanaix Projection Digital Alarm Clock User Manual

Introduction

Thank you for purchasing the Hanaix Projection Digital Alarm Clock. This manual provides detailed instructions for the proper setup, operation, and maintenance of your new device. Please read this manual thoroughly before use to ensure optimal performance and to prevent damage.

Package Contents

Please check the package for the following items:

• Hanaix Projection Digital Alarm Clock
• Power Adapter
• USB Charging Cable
• User Manual
• CR2032 Button Cell Battery (pre-installed for memory backup)

Image: Package contents showing the alarm clock, power adapter, USB cable, and user manual.

Product Overview

Familiarize yourself with the various parts and controls of your alarm clock.

Image: Detailed diagram illustrating the front, top, and rear views of the alarm clock, labeling components such as the projector, display, control buttons (SET, VOL, AL, SNOOZE/LIGHT, RADIO/SLEEP, UP, DOWN), USB charging port, memory battery compartment, and radio antenna.

• 1. Projector: Projects time onto a surface.
• 2. Automatic Dimming Sensor: Adjusts display brightness automatically.
• 3. 'Zz' Down Button: Decreases values, adjusts radio frequency down.
• 4. 'Up' / Project Button: Increases values, adjusts radio frequency up, controls projection.
• 5. Radio / Sleep Button: Activates FM radio and sleep timer.
• 6. Snooze / Light Button: Activates snooze, adjusts display brightness.
• 7. Volume Button: Adjusts alarm and radio volume.
• 8. SET Button: Enters setting modes for time and alarms.
• 9. AL (Alarm) Button: Sets and activates alarms.
• 10. USB Charging Port: For charging external devices.
• 11. Memory Battery Compartment: Holds CR2032 battery for time backup.
• 12. Loudspeaker Box: Audio output for alarms and radio.
• 13. Supply Hub: Power input port.
• 14. Radio Antenna: For FM radio reception.

Setup

1. Power Connection

1. Connect the provided power adapter to the 'Supply Hub' port on the back of the alarm clock.
2. Plug the power adapter into a standard electrical outlet. The display will light up.

2. Battery Backup

The alarm clock includes a pre-installed CR2032 button cell battery for memory backup. This battery preserves time and alarm settings during a power outage. It does not power the main display or functions.

Operating Instructions

1. Setting the Time

1. Press and hold the SET button for 3 seconds to enter time setting mode. The hour digits will flash.
2. Use the UP or DOWN buttons to adjust the hour.
3. Press SET again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP or DOWN buttons to adjust the minutes.
5. Press SET again to confirm the minutes and move to 12/24-hour format selection.
6. Use the UP or DOWN buttons to select either 12H or 24H format.
7. Press SET one last time to save all settings and exit time setting mode.

2. Setting Alarms (Dual Alarms)

The clock supports two independent alarms (AL1 and AL2).

1. Press and hold the AL button for 3 seconds to enter Alarm 1 setting mode. The AL1 icon and hour digits will flash.
2. Use the UP or DOWN buttons to adjust the alarm hour.
3. Press AL again to confirm the hour and move to minute setting. The minute digits will flash.
4. Use the UP or DOWN buttons to adjust the alarm minutes.
5. Press AL again to select the alarm sound source (FM radio or built-in buzzer). Use UP or DOWN to choose.
6. Press AL again to set the alarm volume (1-15 levels). Use UP or DOWN to adjust.
7. Press AL one last time to save Alarm 1 settings.
8. To set Alarm 2, repeat steps 1-7.

To activate or deactivate an alarm, short press the AL button. The corresponding alarm icon (AL1 or AL2) will appear or disappear on the display.

Image: Illustration of the dual alarm function, allowing two separate wake-up times, and the snooze feature.

3. Snooze Function

When an alarm sounds, press the large SNOOZE/LIGHT button on top of the clock to activate snooze. The alarm will pause for 5 minutes and then sound again. To stop the alarm completely, press any other button.

4. Projection Function

The clock can project the time onto a wall or ceiling.

• Activate/Deactivate Projection: Short press the UP / Project button to turn the projection on or off.
• Adjust Projection Angle: The projector lens can be rotated 180 degrees to adjust the projection direction.
• Adjust Projection Brightness: Press and hold the UP / Project button to cycle through projection brightness levels (Strong, Weak, Off).
• Focus Adjustment: Rotate the focus ring around the projector lens to sharpen the projected image.

Image: The clock projecting time onto a ceiling, showing the 180-degree rotation capability and three brightness settings for the projection.

5. Display Brightness Adjustment

The main LED display has multiple brightness levels.

• Manual Adjustment: Short press the SNOOZE/LIGHT button to cycle through 4 brightness levels (100%, 60%, 25%, Off).
• Automatic Dimming: The clock features an automatic dimming sensor. To activate, ensure the 'Automatic Dimming Sensor' is enabled (refer to product overview diagram for location). The display brightness will adjust based on ambient light.

Image: Visual representation of four brightness settings for the main LED display and two brightness settings for the projected time.

6. FM Radio Operation

The alarm clock includes an FM radio function.

1. Turn On/Off: Short press the RADIO/SLEEP button to turn the FM radio on or off.
2. Auto Scan: When the radio is on, press and hold the RADIO/SLEEP button for 3 seconds to automatically scan and save available FM stations.
3. Manual Tuning: Use the UP or DOWN buttons to manually tune to a specific frequency.
4. Volume Adjustment: Press the VOL button, then use UP or DOWN to adjust the radio volume (1-15 levels).
5. Sleep Timer: While the radio is playing, short press the RADIO/SLEEP button repeatedly to set a sleep timer (5-90 minutes). The radio will automatically turn off after the selected duration.

Image: The clock displaying time, temperature, and humidity, with indicators for FM radio frequency range (76.0MHz-108.0MHz), 15-level volume control, and an auto-off sleep timer (5-90 minutes).

7. USB Charging Port

The integrated USB charging port allows you to charge your smartphone or other USB-powered devices. Simply connect your device's charging cable to the USB port on the back of the alarm clock.

Image: A close-up view of the USB charging port on the side of the alarm clock, demonstrating its use for charging a smartphone.

8. Temperature and Humidity Display

The clock continuously displays indoor temperature (in Celsius or Fahrenheit) and humidity percentage. These readings are for informational purposes and may vary slightly from other sensors.

Maintenance

• Cleaning: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Power: Always use the provided power adapter. Disconnect power during thunderstorms or when not in use for extended periods.
• Battery Replacement: If the time and settings are not retained during a power outage, the CR2032 memory battery may need replacement. Open the battery compartment on the bottom of the clock and replace it with a new CR2032 battery.
• Environment: Avoid placing the clock in direct sunlight, near heat sources, or in areas with high humidity.

Troubleshooting

Specifications

Warranty and Support

This product comes with a limited warranty. For specific warranty details, please refer to the information provided at the time of purchase or contact Hanaix customer support.

If you encounter any issues or have questions regarding your Hanaix Projection Digital Alarm Clock, please contact our customer support team for assistance. We are committed to providing 24/7 service to ensure your satisfaction.