1. Product Overview
The BLACK+DECKER 1.5 HP Variable Speed In Ground Pool Pump is designed for efficient and quiet operation in in-ground pool systems. It features WiFi connectivity, Energy Star certification for energy savings, and automatic dual voltage sensing (115V/230V). The pump includes a self-priming motor, low-speed options for thorough filtration, and exclusive self-diagnostics to maintain high performance.
Image 1.1: Overview of the BLACK+DECKER 1.5 HP Variable Speed Pool Pump.
Key Features:
- Self-Priming, Quiet, Variable Speed Motor with Low Speed Options for Thorough Filtration, and Exclusive Self-Diagnostics.
- Consumer-Friendly Installation (1.5” and 2” ports included), with an easy to program touchpad for optimal speeds, and automatic smart dual voltage sensor (115V-230V).
- Permanent magnet technology increases pump efficiency, earning Energy Star Certification for reduced energy costs (qualifies for utility rebates in select states).
- WiFi Enabled: Connects to any Smartphone/Smart device.
- 5-Year Warranty Included.
2. Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your BLACK+DECKER Variable Speed Pool Pump. Ensure all local codes and ordinances are followed during installation.
2.1 Unboxing and Components
Upon unboxing, verify all components are present and in good condition. The package includes the pump unit, instruction manual, electrical cover, union fittings for 1.5" and 2" plumbing, pump basket, and pump lid.
Image 2.1: The pump comes with union adapters for both 1.5" and 2" pipes, and an adjustable base.
Image 2.2: Product dimensions are approximately 26.5" L x 11" W x 13" H. Ensure adequate space for installation.
2.2 Placement and Mounting
Place the pump on a level, stable surface. The adjustable base can be removed to anchor the pump directly to a concrete pad, reducing vibration and ensuring stability. Four screws secure the pump to its base, which can be removed for direct mounting.
Image 2.3: The pump should be installed on a stable, level surface near the pool equipment.
2.3 Plumbing Connections
The pump is equipped with both 1.5" and 2" union adapters to accommodate various plumbing sizes. The suction side of the pump is where water enters from the pool, passing through the pump basket. The discharge side is where filtered water returns to the pool. Ensure all connections are watertight to prevent leaks and maintain pump efficiency.
Video 2.4: This video demonstrates the installation of universal adapters to fit various plumbing sizes, ensuring a secure connection to your pool system.
2.4 Electrical Connections
The pump supports dual voltage (115V/230V). Connect the supply wires to the electrical box located on the back of the motor. Ensure proper grounding and bonding to prevent stray voltage. The electrical box contains terminals for line 1, line 2, and ground connections. Always consult a qualified electrician if unsure about wiring procedures.
Image 2.5: The motor housing includes a protected electrical box for wiring connections and a control panel for operation.
3. Operating Instructions
The BLACK+DECKER Variable Speed Pool Pump features an easy-to-use digital control panel for setting optimal speeds and schedules.
3.1 Control Panel Overview
The control panel allows you to adjust pump speed, set operating times, duration, and monitor wattage. It includes buttons for four preset speeds, manual/schedule mode selection, display options, quick clean function, and start/stop.
Image 3.1: The easy programming touchpad allows for individual customization of 4 speeds, ranging from 350 RPM to 3,450 RPM.
3.2 Setting Speeds and Schedules
- Speed Buttons (1-4): Select desired running speed. The pump can operate between 350 RPM and 3450 RPM.
- Manual/Schedule Mode: Toggle between manual operation and programmed schedules.
- Display: Cycle through different display options such as current speed, time, duration, and wattage.
- Quick Clean: Activate a temporary high-speed cleaning cycle.
- Start/Stop: Initiate or halt pump operation.
Adjusting speeds allows for energy optimization. Run at lower RPMs during off-peak hours for filtration and higher RPMs for cleaning or when more circulation is needed.
4. Maintenance
Regular maintenance ensures the longevity and efficient operation of your pool pump.
4.1 Cleaning the Pump Basket
The pump basket collects debris before it enters the pump impeller. Regularly inspect and clean the basket to prevent clogs and maintain optimal water flow. To access the basket, simply twist the pump lid counter-clockwise to open, remove the basket, empty debris, and rinse. Reinsert the basket, ensuring it aligns with the grooves, and securely close the lid by twisting clockwise.
Video 4.1: This video demonstrates how to easily clean the pump basket by removing the lid, emptying debris, and re-securing it.
4.2 Winterization
In regions with freezing temperatures, proper winterization is essential. The pump includes drain plugs on both the inlet and outlet sides. Remove these plugs to completely drain water from the pump, preventing freeze damage. Store the plugs in a safe place for reinstallation in the spring.
5. Troubleshooting
This section addresses common issues you might encounter with your pool pump.
- Pump Not Priming: Ensure the pump basket is full of water before starting. Check for air leaks in the suction line or a clogged pump basket.
- Reduced Flow: Inspect the pump basket and skimmer baskets for debris. Check filter pressure and backwash if necessary. Verify all valves are fully open.
- Unusual Noise/Vibration: Ensure the pump is securely mounted to its base or pad. Check for debris in the impeller or a loose motor component.
- Leaks: Inspect all plumbing connections for tightness. Check O-rings on the pump lid and union adapters for proper seating and condition.
- Electrical Issues: Ensure the pump is receiving the correct voltage (115V or 230V). Check circuit breakers and electrical connections.
6. Specifications
| Brand: | BLACK+DECKER |
| Model: | B09BBMK3VR |
| Horsepower: | 1.5 HP |
| Voltage: | Dual Voltage (115V/230V) |
| Flow Rate: | Adjustable from 350 - 3,450 RPM (Max 80 Gallons Per Minute) |
| Product Dimensions: | 26.5" L x 11" W x 13" H |
| Item Weight: | 29 Pounds |
| Material: | Plastic |
| Certifications: | Energy Star Certified, ETL Listed (Conforms to UL STD. 1081, Certified to CSA STD. C22.2 NO. 108) |
Image 6.1: Detailed product specifications for a similar model (BDXBTV23825).
Image 6.2: Detailed product specifications for a similar model (BDXBTV24333).
7. Warranty and Support
The BLACK+DECKER 1.5 HP Variable Speed In Ground Pool Pump comes with a 5-Year Warranty. For technical support, troubleshooting assistance, or warranty claims, please contact BLACK+DECKER customer service. Refer to the contact information provided in the full instruction manual included with your product.
