ZdalaMit ZRC-400 Replacement Remote Control User Manual
For Dynex TV Models
Introduction
This manual provides instructions for the ZdalaMit ZRC-400 replacement remote control. This remote is designed to function with various Dynex TV models without requiring any programming. Simply install batteries, and it is ready for use.
Product Overview
The ZdalaMit ZRC-400 is a standard infrared remote control featuring a comprehensive button layout for controlling Dynex televisions. Its ergonomic design ensures comfortable handling.
Image: Top-down view of the ZdalaMit ZRC-400 remote control, displaying its full button layout including power, input, number keys, navigation, volume, channel, and function buttons.
Image: Angled view of the ZdalaMit ZRC-400 remote control, highlighting its sleek black design and button arrangement.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two (2) 1.5V AAA alkaline batteries, ensuring correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
No programming is required. Once batteries are installed, the remote control is ready for immediate use with compatible Dynex TV models.
Operating Instructions
Point the remote control directly at your Dynex TV's infrared receiver. Ensure there are no obstructions between the remote and the TV.
- Power Button (⏻): Press to turn the TV on or off.
- Input Button: Select different input sources (e.g., HDMI, Video, TV).
- Number Buttons (0-9): Directly select TV channels.
- VOL+ / VOL-: Adjust the volume up or down.
- CH^ / CHv: Change channels up or down.
- Mute Button (🔇): Mute or unmute the TV audio.
- Menu Button: Access the TV's on-screen menu.
- Navigation Arrows (◀ ▶ ▲ ▼): Navigate through menu options.
- ENTER Button: Confirm selections in menus.
- Exit Button: Exit the current menu or function.
- Info Button: Display channel or program information.
- Guide Button: Access the electronic program guide (if supported by TV).
- Recall Button: Switch between the current and previously viewed channel.
- Favorite Button: Access favorite channels list.
- Video, Comp, HDMI, TV, VGA: Direct access buttons for various input sources.
- MTS/SAP, Sleep, CH-List, Zoom, Picture, Audio, CCD: Additional function buttons for specific TV features.
Compatible Dynex TV Models
The ZdalaMit ZRC-400 remote control is compatible with the following Dynex TV models:
- DX-15L150A11
- DX-19L150A11
- DX-22L150A11
- DX-42E250A12
- DX-40L150A11
- DX-32L200A12
- DX-37L200A12
- DX-46L262A12
- DX-32L150A11
- DX-37L150A11
- DX-46L150A11
- DX-40L130A11
- DX-40L261A12
- DX-46L260A12
- DX-46L261A12
- DX-32L230A12
- DX-46L230A12
- DX-24L230A12
- DX-15E220A12
- DX-24L150A11
- DX-24L200A12
- DX-26L100A13
- DX-32L100A13
- DX-26L150A11
- DX-32L220A12
Troubleshooting
- Remote not responding:
- Ensure the remote is pointed directly at the TV's infrared sensor.
- Check for any obstructions between the remote and the TV.
- Verify that the batteries are inserted correctly with the proper polarity.
- Replace the batteries with fresh 1.5V AAA alkaline batteries.
- Intermittent response:
- Weak batteries can cause inconsistent performance. Replace them.
- Ensure the remote's infrared emitter is clean and free of debris.
Specifications
| Brand | ZdalaMit |
| Model | ZRC-400 |
| Special Feature | Pre Programmed |
| Color | Black |
| Compatible Devices | Television (Dynex TVs) |
| Max Number of Supported Devices | 1 |
| Connectivity Technology | Infrared |
| Button Quantity | 18 |
| Controller Type | Button Control |
| Maximum Range | 33 feet |
| Power Supply | 2 x 1.5V AAA Alkaline Batteries (not included) |
| Item Weight | 40 g |
| Item Dimensions (L x W x H) | 7.15"L x 1.99"W x 0.55"H |
Warranty and Support
This product comes with a 1-year warranty from the manufacturer, ZdalaMit Factory.
For any questions or assistance regarding your ZdalaMit ZRC-400 remote control, please contact the manufacturer or your retailer for support.