LONONEN MD300
Contents
LONONEN Mini Dehumidifier User Manual
Model: MD300
Introduction
Thank you for choosing the LONONEN Mini Dehumidifier. This compact and efficient appliance is designed to remove excess moisture from small spaces, helping to prevent mold, mildew, and musty odors. Its quiet operation and automatic shut-off feature make it ideal for use in bedrooms, bathrooms, closets, and other confined areas.

Front view of the LONONEN Mini Dehumidifier, showcasing its compact design and visible water tank.
Product Features
- Compact and Portable: Designed for small spaces, easy to move.
- Quiet Operation: Operates at approximately 35dB, suitable for bedrooms and quiet environments.
- Auto Shut-Off: Automatically turns off when the water tank is full to prevent overflow.
- Efficient Dehumidification: Utilizes semiconductor refrigeration technology to condense moisture.
- One-Button Control: Simple and intuitive operation.
Components
- Main Unit (with fan and cooling elements)
- Removable Water Tank (800ml capacity)
- Power Adapter

An internal view illustrating the semiconductor refrigeration technology that condenses moisture from the air.
Setup Instructions
- Unpack: Carefully remove the dehumidifier and all accessories from the packaging.
- Placement: Place the unit on a flat, stable surface in the desired location. Ensure there is at least 10 cm (4 inches) of space around the air inlet (rear) and outlet (top) for proper airflow. Avoid placing it near heat sources or in direct sunlight.
- Power Connection: Connect the power adapter to the dehumidifier's power input port, then plug the adapter into a suitable electrical outlet (100-240V AC, 50/60Hz).

The dehumidifier's compact dimensions (5.71 inches wide, 8.54 inches high) make it suitable for various small spaces.
Operating Instructions
- Power On: Press the power button located on the top of the unit. The indicator light will illuminate blue, indicating the unit is operating.
- Dehumidification: The dehumidifier will begin to draw in moist air, condense the water vapor, and release dry air. Water will collect in the removable tank at the bottom.
- Auto Shut-Off: When the water tank reaches its maximum capacity (800ml), the unit will automatically turn off, and the indicator light will change to orange.
- Power Off: To turn off the unit manually, press the power button again. The indicator light will turn off.

The single power button controls operation, with a blue light for 'Working' and an orange light for 'Water Full'.

The dehumidifier operates at a quiet 35dB, comparable to a whisper, ensuring minimal disturbance.
Maintenance
Emptying the Water Tank
- When the water tank is full, the dehumidifier will stop operating, and the indicator light will turn orange.
- Gently pull out the water tank from the front of the unit.
- Carefully pour out the collected water.
- Slide the empty water tank back into the unit until it clicks into place. Ensure it is securely seated.
- Press the power button to resume operation.
Cleaning the Unit
- Always unplug the dehumidifier before cleaning.
- Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Clean the water tank regularly with mild soap and water to prevent mold or bacterial growth. Rinse thoroughly.
- Ensure the air inlet and outlet are free from dust and obstructions. You can use a soft brush or vacuum cleaner to gently remove dust.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply. Water tank not properly inserted. Water tank is full. | Ensure power adapter is securely plugged into unit and outlet. Re-insert the water tank correctly until it clicks. Empty the water tank and re-insert. |
| Unit is running but not collecting water. | Humidity level is too low. Room temperature is too low. Airflow is blocked. | Dehumidifier works best in relative humidity above 45%. Optimal operating temperature is 59°F-104°F (15°C-40°C). Ensure air inlet/outlet are clear of obstructions. |
| Unusual noise during operation. | Unit is not on a flat surface. Internal component issue. | Place the unit on a stable, flat surface. If noise persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LONONEN |
| Model Name | MD300 |
| Capacity | 800 Milliliters (27 oz) |
| Dehumidification Capacity | 1.02 Pints per Day |
| Floor Area Coverage | Up to 190 Square Feet |
| Product Dimensions | 5.12"D x 6.3"W x 11.02"H |
| Item Weight | 2.68 pounds |
| Wattage | 22 watts |
| Operation Mode | Sleep (Quiet Operation) |
| Material | ABS plastic |
| Color | White |
| Upper Temperature Rating | 40 Degrees Celsius |
Warranty and Support
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official LONONEN website. Keep your purchase receipt as proof of purchase for any warranty claims.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.