1. Introduction
Thank you for choosing the Rowenta Mini Excel Aqua Ceramic Fan Heater. This manual provides essential information for the safe and efficient operation of your appliance. Please read it thoroughly before use and keep it for future reference.
Figure 1: Angled view of the Rowenta Mini Excel Aqua Ceramic Fan Heater.
2. Safety Instructions
To prevent personal injury or damage to the appliance, always observe the following safety precautions:
- Ideal for Bathrooms: This heater features drip protection, making it suitable for safe use in bathrooms. Ensure it is placed away from direct water spray.
- Tip-Over Safety Switch: The appliance is equipped with a 4-direction tip-over switch that automatically shuts off the heater if it is accidentally knocked over.
- Double Safety System: A double safety system with an alarm automatically shuts off the heater before overheating occurs.
- Do not cover the heater. Overheating can occur if the heater is covered.
- Do not use this heater in the immediate vicinity of a bath, a shower or a swimming pool.
- Keep children and pets away from the appliance during operation.
- Always unplug the heater when not in use or before cleaning.
Figure 2: Water drip protection icon, indicating suitability for bathroom environments.
3. Product Overview
3.1 Components
- Ceramic heating element
- Control panel with rotary knobs
- Air intake grille (rear)
- Air outlet grille (front)
- Integrated carrying handle
- Washable filter
3.2 Control Panel
Figure 3: Top view of the control panel.
The control panel features two rotary knobs:
- Left Knob: Mode selection (Off, Silent, Turbo, Cold Ventilation).
- Right Knob: Thermostat/Temperature adjustment.
3.3 Design Features
- Compact Size: The heater's compact format allows for easy transport and convenient storage.
- Integrated Handle: An integrated handle facilitates easy movement of the appliance.
Figure 4: Compact size icon.
Figure 5: Integrated handle for portability.
4. Setup
- Unpack the heater and remove all packaging materials.
- Place the heater on a stable, flat, and heat-resistant surface.
- Ensure there is adequate clearance around the heater (at least 50 cm from walls, furniture, and curtains) to allow for proper air circulation.
- Plug the power cord into a suitable electrical outlet. Ensure the voltage matches the specifications of the heater.
5. Operating Instructions
5.1 Power On/Off
Turn the left rotary knob to the '0' position to turn the heater off. Turn it to 'Silent', 'Turbo', or 'Cold Ventilation' to turn it on.
5.2 Heating Modes
- Silent Mode (1000 W): For prolonged use and quiet operation at approximately 50 dB(A). Ideal for maintaining a comfortable temperature without significant noise.
- Turbo Mode (2000 W): For faster heating and maximum warmth.
Figure 6: Silent mode indicator.
Figure 7: Power settings indicator (1000W-2000W).
5.3 Cold Ventilation Function
Turn the left rotary knob to the 'Cold Ventilation' setting to use the heater as a fan for cooling or airing small spaces during warm weather.
5.4 Thermostat and Frost Detection
Use the right rotary knob to adjust the desired temperature. The integrated thermostat will maintain the set temperature. The heater also features a frost detection function, which will activate heating if the room temperature drops below a certain threshold (typically around 5°C).
Figure 8: Temperature adjustment icon.
Figure 9: Frost detection icon.
6. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
6.1 Cleaning the Washable Filter
The heater is equipped with a washable filter for lasting performance. Clean the filter regularly to prevent dust buildup and maintain air quality.
- Ensure the heater is unplugged and completely cool before cleaning.
- Locate and remove the filter from the rear air intake grille.
- Wash the filter under running water.
- Allow the filter to dry completely before reinserting it into the heater.
Figure 10: Removable and washable filter.
6.2 General Cleaning
- Wipe the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no water enters the internal components.
7. Troubleshooting
If you encounter issues with your heater, refer to the following table:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Tip-over switch activated. Overheat protection activated. | Check power cord and outlet. Ensure heater is upright on a stable surface. Unplug, allow to cool, then restart. |
| Insufficient heating. | Incorrect power setting. Dirty filter. Room too large. | Select Turbo mode (2000W). Clean the air filter. Ensure heater is appropriate for room size. |
| Unusual noise. | Foreign object in fan. Loose component. | Unplug and inspect for obstructions. If problem persists, contact support. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | Rowenta |
| Model Number | SO9281 |
| Color | White and Blue |
| Product Dimensions (L x W x H) | 41 x 17 x 18 cm |
| Item Weight | 1.82 Kilograms |
| Power | 1000 W (Silent Mode), 2000 W (Turbo Mode) |
| Number of Speeds | 2 (Silent, Turbo) + Cold Ventilation |
| Noise Level | 50 dB(A) (Silent Mode) |
| Special Features | Compact, Multifunction (cold ventilation + 2 heating positions), Powerful and adjustable, Silent, Safe (drip protection, tip-over switch, overheat protection), Ceramic technology, Frost detection, Washable filter, Integrated handle. |
| Recommended Use | Indoor, Bathroom |
| Power Source | Electric Cable |
| Heating Method | Convection (Ceramic Fan Heater) |
9. Warranty and Support
This product comes with a 2-year warranty. Additionally, Rowenta commits to 15-year repairability for this model, ensuring long-term support and availability of spare parts.
For technical assistance, spare parts, or warranty claims, please refer to the contact information provided in your product packaging or visit the official Rowenta website.
