Product Overview
The ELYONA 8 Inch Pendant Light Fixture is designed to provide ambient lighting with a vintage industrial aesthetic. It features a hand-blown bubble glass shade and an oil-rubbed bronze metal base, suitable for various indoor settings such as kitchen islands, dining rooms, and bars.
Image: The ELYONA 8 Inch Pendant Light Fixture, showcasing its unique seeded bubble glass and oil-rubbed bronze components.
Included Components
Please verify that all components are present before beginning installation:
- Pendant Light Fixture with Hand Blown Bubble Glass Shade
- Oil Rubbed Bronze Metal Base
- Mounting Hardware (including ceiling canopy and cords)
Note: Bulb is not included.
Setup and Installation
Professional installation is recommended. Ensure power is turned off at the circuit breaker before beginning. This fixture is designed for semi-flush mount installation and can be adjusted for various ceiling heights and bevels.
Tools Required (Not Included):
- Screwdriver (Phillips and Flathead)
- Wire Strippers
- Electrical Tape
- Ladder (if necessary)
Installation Steps:
- Turn off Power: Locate the circuit breaker controlling the light fixture's location and turn off the power.
- Prepare Wiring: Carefully remove the existing fixture (if any) and expose the electrical wires from the ceiling junction box.
- Mount Canopy: Secure the mounting bracket to the junction box using the provided screws. Attach the ceiling canopy to the mounting bracket.
- Adjust Height: Adjust the length of the hanging cord to your desired height. The maximum adjustable height is 56 inches.
- Connect Wires: Connect the fixture's wires to the corresponding household wires (black to black, white to white, ground to ground) using wire nuts. Secure connections with electrical tape.
- Attach Fixture: Carefully tuck the wires into the junction box and secure the fixture's base to the ceiling canopy.
- Install Bulb: Screw in a compatible E26 base bulb (LED, CFL, Edison, or incandescent, less than 40W).
- Restore Power: Turn the power back on at the circuit breaker.
Image: Product specification diagram illustrating dimensions, adjustable hanging height, and compatible bulb types (A15/A19, Vintage Filament, LED, CFL).
Operating Instructions
Once installed, the pendant light operates via your standard wall switch. This fixture supports dimming when used with a compatible dimmer switch and a dimmable E26 base bulb (both not included).
Image: Three ELYONA pendant lights illuminating a kitchen island, demonstrating the dimmable functionality (dimmer switch and dimmable bulb sold separately).
Bulb Requirements:
- Base Type: E26
- Maximum Wattage: 40W
- Compatible Bulb Types: LED, CFL, Edison, Incandescent, Smart Bulbs
Maintenance
Regular maintenance ensures the longevity and appearance of your pendant light fixture.
Cleaning:
- To clean the glass shade and metal base, simply rinse with water or wipe with a damp, soft cloth.
- Immediately dry the surfaces after cleaning to prevent water spots or corrosion.
- Avoid using abrasive cleaners or solvents, as these can damage the finish.
Bulb Replacement:
- Always turn off the power to the fixture at the circuit breaker before replacing a bulb.
- Allow the old bulb to cool completely before touching it.
- Unscrew the old bulb and screw in the new E26 base bulb, ensuring it does not exceed 40W.
Image: A detailed close-up of the hand-blown seeded bubble glass shade, highlighting its unique texture.
Troubleshooting
If you encounter issues with your ELYONA pendant light, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to fixture Loose wiring connection Faulty bulb | Check circuit breaker and wall switch. Ensure all wire connections are secure (power off first). Replace bulb with a new, working one. |
| Light flickers | Loose bulb Incompatible dimmer/bulb Loose wiring | Tighten bulb. Ensure both dimmer and bulb are dimmable and compatible. Check wiring connections (power off first). |
| Dimming not working | Non-dimmable bulb No dimmer switch installed | Use a dimmable E26 base bulb. Install a compatible dimmer switch. |
If the problem persists after attempting these solutions, please contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | ELYONA |
| Model Name | UP4100-ORB |
| Color | Bronze |
| Material | Bronze Metal, Hand Blown Bubble Glass |
| Product Dimensions | 8"L x 8"W x 56"H (Max adjustable height) |
| Item Weight | 2.35 pounds |
| Light Fixture Form | Pendant |
| Installation Type | Semi Flush Mount |
| Power Source | Corded Electric |
| Voltage | 110 Volts |
| Bulb Base | E26 |
| Maximum Compatible Wattage | 40 Watts |
| Special Features | Adjustable Height, Dimmable (Bulbs NOT Included) |
| Indoor/Outdoor Usage | Indoor |
| Certification | ETL |
Image: Detailed view of the high-quality oil rubbed bronze metal finish and the unique handcrafted bubble glass, emphasizing durability and aesthetic appeal.
Warranty and Support
ELYONA offers a One Year Warranty for this product, covering manufacturing defects from the date of purchase. This warranty ensures a great value shopping experience.
Customer Support:
For any questions, concerns, or warranty claims, please contact ELYONA customer support directly through the Amazon message box. Provide your order details and a description of the issue for prompt assistance.
An official Installation Manual in PDF format is available for download: Download Installation Manual (PDF)
