Leikefitness BC2280 Folding Exercise Bike User Manual

1. Introduction

This manual provides essential instructions for the safe and effective use of your Leikefitness BC2280 Folding Exercise Bike. Please read this manual thoroughly before assembly and operation to ensure proper function and to maximize your workout experience.

The Leikefitness BC2280 is a versatile 2-in-1 fitness ergometer designed for home use. It features 12 levels of magnetic resistance, a heart rate monitor, an LCD display, and integrated resistance bands for upper body workouts. Its foldable design allows for convenient storage.

Figure 1: Leikefitness BC2280 Folding Exercise Bike in upright position.

2. Safety Information

Before using the exercise bike, please observe the following safety precautions:

• Consult a physician before starting any new exercise program.
• Ensure all bolts and nuts are securely tightened before each use.
• Place the exercise bike on a flat, stable surface. Use a mat to protect flooring.
• Keep children and pets away from the equipment during operation.
• Do not exceed the maximum user weight of 120 kg (approximately 265 lbs).
• Wear appropriate exercise clothing and footwear.
• Stop exercising immediately if you feel faint, dizzy, or experience pain.
• Keep hands and feet clear of moving parts.

3. Package Contents

Upon unpacking, verify that all components are present:

• 1 x Leikefitness Folding Exercise Bike (main frame, seat, pedals, handlebars, monitor)
• All necessary assembly accessories and tools
• 1 x User Manual
• 2 x AAA Batteries (for monitor)

4. Setup and Assembly

The Leikefitness BC2280 is designed for straightforward assembly. Follow these steps:

1. Unpacking: Carefully remove all components from the packaging. Lay them out on a clean, flat surface.
2. Unfolding the Frame: Gently unfold the main frame of the exercise bike. Secure it in the desired position (upright or recumbent) using the designated screw mechanism. Ensure it clicks into place or is securely fastened.
3. Attaching Stabilizers: Attach the front and rear stabilizer bars to the main frame using the provided bolts and tools.
4. Installing Pedals: Identify the left (L) and right (R) pedals. Screw them into the corresponding crank arms. Note that the left pedal typically screws counter-clockwise.
5. Mounting Seat and Backrest: Attach the seat and backrest to the seat post. Adjust the seat height to your preference using the 7 adjustable height settings. Ensure the seat is securely locked in position.
6. Attaching Handlebars and Monitor: Mount the handlebars and the LCD monitor to the main frame. Connect any necessary sensor cables to the monitor.
7. Inserting Batteries: Open the battery compartment on the back of the LCD monitor and insert the 2 AAA batteries provided.
8. Final Check: Before first use, double-check that all connections are secure and all bolts are tightened.

Figure 2: Dimensions of the Leikefitness BC2280 Exercise Bike. Ensure adequate space for use and storage.

5. Operating Instructions

5.1 Adjusting Resistance

The Leikefitness BC2280 features 12 levels of magnetic resistance. To adjust the resistance, rotate the tension control knob located on the main frame. Turn clockwise to increase resistance and counter-clockwise to decrease it. It is recommended to start at a lower level (1-4 for relaxed mode) and gradually increase as your fitness improves (5-8 for motion mode, 9-12 for captain mode).

Figure 3: The tension control knob for adjusting magnetic resistance levels (1-12).

5.2 Using the LCD Monitor

The integrated LCD monitor displays real-time workout data. To activate, simply begin pedaling or press the mode button. The monitor will cycle through or display the following metrics:

• Speed: Current cycling speed.
• Time: Duration of your workout.
• Distance: Total distance covered during the workout.
• Calories Burnt: Estimated calories expended.
• Heart Rate: Your current heart rate, measured by the sensors on the handlebars.

To measure your heart rate, grip the heart rate sensors on the handlebars firmly with both hands. Your heart rate will be displayed on the monitor after a few seconds.

The monitor also includes a convenient holder for your phone or tablet.

Figure 4: Close-up of the LCD monitor showing various metrics and heart rate sensors.

5.3 Using Resistance Bands for Upper Body Workout

The exercise bike is equipped with two elastic resistance bands for upper body training. While seated on the bike, you can use these bands to perform exercises targeting your arms, chest, and shoulders. Ensure a stable posture while using the bands.

Figure 5: Examples of exercises using the integrated resistance bands and different bike configurations.

5.4 Changing Frame Configuration (2-in-1 Design)

The Leikefitness BC2280 features a 2-in-1 frame design, allowing you to switch between an upright and a recumbent cycling position. To change the configuration, locate the adjustment screw on the frame. Loosen the screw, adjust the frame to your desired position, and then securely tighten the screw. Always ensure the frame is stable before use.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your exercise bike:

• Cleaning: Wipe down the bike with a damp cloth after each use to remove sweat and dust. Avoid abrasive cleaners.
• Inspection: Periodically check all bolts, nuts, and moving parts for tightness and wear. Tighten any loose fasteners.
• Lubrication: No specific lubrication is required for the magnetic resistance system.
• Storage: When not in use, fold the bike for compact storage. Store in a dry, cool place away from direct sunlight.
• Battery Replacement: Replace the AAA batteries in the LCD monitor when the display becomes dim or unresponsive.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Leikefitness is committed to providing quality fitness equipment. For warranty information, product support, or any questions regarding your BC2280 Folding Exercise Bike, please contact Leikefitness customer service. Refer to the contact information provided with your purchase or visit the official Leikefitness website for details.

We are always ready to assist you with any inquiries.