Podofo 9.5-Inch Vertical Touch Screen Car Stereo User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Podofo 9.5-inch Vertical Touch Screen Car Stereo. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

Package Contents

Verify that all items are present in the package:

• Podofo 9.5-inch Vertical Touch Screen Car Stereo Unit
• Power Cord
• USB Cable
• Rear Camera
• Mounting Brackets and Screws
• GPS Antenna
• User Manual (this document)

Figure 1: Included accessories with the car stereo unit.

Setup and Installation

Pre-Installation Considerations

• Screen Connector: The screen connector is a plug-and-play type. Ensure it is securely seated and consider using electrical tape to reinforce the connection to prevent accidental dislodgement during adjustment or vehicle movement.
• Mounting: The radio body is compact. Custom brackets or modifications to factory brackets may be necessary to achieve a flush fit in some vehicles.
• Antenna Adapter: Some vehicles may require a separate antenna adapter for proper radio reception. Verify your vehicle's requirements before installation.
• Screen Detachment: For easier installation, the screen can be detached. Pull the large tab on the right side of the screen mount outwards. Then, push the small tab on the front of the mount forward while lifting the screen. A cover at the top of the screen where the ribbon cable connects can be removed to disconnect the cable.

Wiring Diagram

Refer to the following diagram for proper wiring connections. Incorrect wiring can damage the unit or vehicle electrical system.

Figure 2: Rear panel connections and wiring points.

• Power Cable: Connect to vehicle's power supply (ACC, B+, Ground).
• RCA Input/Output: For external audio/video devices.
• USB Ports: For media playback, phone charging, and CarPlay/Mirror Link connections.
• Camera Input: Connect the AHD/CVBS backup camera.
• GPS Antenna: Connect for navigation functionality.
• Steering Wheel Control (SWC): Connect to your vehicle's SWC wires for remote control.

Backup Camera Wiring

For the backup camera to function correctly:

1. Connect the camera's power wire to the vehicle's reverse light power (12V) and ground.
2. The camera wire typically has an orange trigger wire on each end. Connect the orange wire at the camera end to the 12V side of the camera's power supply.
3. Connect the orange trigger wire at the head unit end to the 'Pink' wire labeled 'Parking Sensor' on the stereo's wiring harness. This wire signals the stereo to display the camera feed when reverse gear is engaged.
4. Connect the RCA video cable from the camera to the yellow RCA Input labeled 'CAMIN' on the stereo's rear panel.

Operating Instructions

Basic Operation

The unit features a 9.5-inch capacitive touch screen for primary control. Physical buttons for Menu, Voice, Power, Previous, Next, and a Volume knob are located on the front panel.

Figure 3: Various user interface screens.

CarPlay Functionality

Connect your iOS device via a USB data cable to enable CarPlay. CarPlay allows you to access phone functions such as navigation, calls, messages, and music through the stereo's interface or voice commands (Siri).

Figure 4: CarPlay interface with voice control.

Bluetooth 4.0

The built-in Bluetooth 4.0 supports A2DP for audio streaming, hands-free calling, and automatic phone book loading. To pair your device:

1. Go to the Bluetooth menu on the stereo.
2. Enable Bluetooth on your mobile device and search for available devices.
3. Select the stereo's Bluetooth name (e.g., 'Car BT') and confirm pairing.

Figure 5: Bluetooth and FM Radio interfaces.

FM Radio

Access the FM radio function to listen to local stations. The unit supports automatic station search and can store up to 18 preset radio stations.

Mirror Link

The Mirror Link function allows you to display your smartphone's screen on the car stereo. Connect your iOS or Android phone via USB. Note that the display may not occupy the full screen, leaving some space on the sides.

Figure 6: Mirror Link, Backup Camera, and Steering Wheel Control features.

Steering Wheel Control (SWC)

After connecting the SWC wires, you can program the stereo to respond to your vehicle's steering wheel buttons. Navigate to the SWC learning menu in the settings and follow the on-screen instructions to assign functions to each button.

AHD Backup Camera

When the vehicle is shifted into reverse, the stereo automatically displays the feed from the connected AHD/CVBS backup camera, providing a clear view of the area behind your vehicle.

Media Playback

The unit supports audio and video playback from USB drives, T-cards (microSD), and AUX IN connections. Insert your media into the appropriate port and select the corresponding source on the stereo.

Screen Adjustment

The 9.5-inch vertical screen is detachable and supports angle adjustment for optimal viewing. You can rotate the screen up to 30 degrees to find a comfortable visual angle.

Figure 7: Dimensions and screen rotation capability.

Maintenance

To ensure the longevity and optimal performance of your car stereo:

• Cleaning: Use a soft, dry cloth to clean the screen and unit. Avoid abrasive cleaners or solvents.
• Temperature: Avoid exposing the unit to extreme temperatures.
• Moisture: Keep the unit dry and away from moisture.
• Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to improve performance and add features.

Troubleshooting

If you encounter issues with your car stereo, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation provided at the time of purchase or visit the official Podofo website. Keep your purchase receipt as proof of purchase for warranty claims.