1. Introduction
This manual provides instructions for the YAOHUIMI Replacement Remote Control, designed to operate various Frigidaire AC Air Conditioner models. This remote offers a convenient solution for replacing a lost or broken original remote, providing essential functions for your air conditioning unit.
Compatible Frigidaire AC Models:
- YX1F8F, YX1F9F
- 5304515943, 66129926904, 66129926905
- FFRA0522U, FFRA0522U1, FFRA0622U1, FFRA0622U10, FFRA0622U1E, FFRA0622U1E0, FFRA062ZA1, FFRA062ZA10
- FFRA0822U1, FFRA0822U10, FFRA0822U1E, FFRA0822U1E0, FFRA082ZA1, FFRA082ZA10
- FFRA1022U1, FFRA1022U10, FFRA1022U1E, FFRA1022U1E0, FFRA102ZA1, FFRA102ZA10
- FFRA1222U1, FFRA1222U10, FFRA1222U1E, FFRA1222U1E0, FFRA122ZA1, FFRA122ZA10
- FFRA2822U2, FFRA2822U20, FFRA2822U2E0
- FFRE0533U1, FFRE0533U10, FFRE0533U1E, FFRE0533U1E0, FFRE053ZA1, FFRE053ZA10
- FFRE0633U1, FFRE0633U10, FFRE0633U1E, FFRE0633U1E0, FFRE0633UE, FFRE0633UE0, FFRE063ZA1, FFRE063ZA10
- FFRE0833U1, FFRE0833U10, FFRE0833U1E, FFRE0833U1E0, FFRE0833UE, FFRE0833UE0, FFRE083ZA1, FFRE083ZA10
- FFRE1033U1, FFRE1033U10, FFRE1033U1E, FFRE1033U1E0, FFRE1033UE, FFRE1033UE0, FFRE103ZA1, FFRE103ZA10
- FFRE1233U1, FFRE1233U10, FFRE1233U1E, FFRE1233U1E0, FFRE1233UE, FFRE1233UE0, FFRE123ZA1, FFRE123ZA10
- FFRE1533U1, FFRE1533U10, FFRE1533U1E0, FFRE1533UE0, FFRE153ZA10
- FFRE1833U2, FFRE1833U20, FFRE1833U2E0
- FFRE2233U20, FFRE2233U2E0
- FFRE2533U20, FFRE2533U2E0
- FFTA0833U10, FFTA1033U10, FFTA1033U20, FFTA1233U10, FFTA1233U20, FFTA1422U20
2. Setup
2.1. Battery Installation
The remote control requires two AAA 1.5V batteries (not included). To install the batteries:
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Image: Front view of the remote control, illustrating the button layout and digital display.
2.2. Initial Use
This replacement remote control is designed for immediate use with compatible Frigidaire AC units. No complex programming or setup is typically required. Once batteries are installed, point the remote towards your AC unit and begin operation.
3. Operating Instructions
Familiarize yourself with the remote's buttons and their functions:
| Button | Function |
|---|---|
| Power (⏻) | Turns the AC unit On or Off. |
| Mode | Cycles through operating modes (e.g., Cool, Fan Only, Eco, Heat if supported by AC unit). |
| Temp ▲ / ▼ | Adjusts the desired temperature setting. |
| Fan | Adjusts the fan speed (e.g., Low, Medium, High, Auto). |
| Eco | Activates or deactivates the energy-saving mode. |
| Sleep | Activates or deactivates the sleep mode, which adjusts temperature for comfort during sleep. |
| Timer | Sets a timer for the AC unit to turn on or off automatically. |
The digital display on the remote will show the current temperature setting, selected mode, fan speed, and timer status.
4. Maintenance
To ensure the longevity and proper functioning of your remote control:
- Keep the remote control clean and dry. Wipe it with a soft, dry cloth. Avoid using liquid cleaners.
- Do not expose the remote to direct sunlight, high temperatures, or high humidity.
- Avoid dropping the remote or subjecting it to strong impacts.
- If the remote will not be used for an extended period, remove the batteries to prevent leakage.
- Replace batteries promptly when the remote's range decreases or buttons become unresponsive.
5. Troubleshooting
If your remote control is not functioning as expected, consider the following troubleshooting steps:
- Replace Batteries: Ensure fresh, new AAA batteries are installed correctly.
- Reset AC Unit: If the remote is unresponsive, try resetting your air conditioner unit. Unplug the AC unit's power cord, wait for approximately 5 minutes, then plug the power cord back in.
- Check Battery Contacts: Carefully pull out the positive pole spring inside the remote's battery compartment slightly. This can improve contact if it was poor. (Applicable for AAA/AA 1.5V battery types).
- Verify Compatibility: Double-check that your specific Frigidaire AC model is listed as compatible with this remote control.
Image: A visual guide detailing troubleshooting steps for common remote control problems, including battery checks and AC unit reset procedures.
6. Specifications
- Brand: YAOHUIMI
- Model Number: A420210723-04
- Manufacturer: HUIMIKEJI
- Power Source: 2 x AAA 1.5V Batteries (not included)
- Item Weight: 2.11 ounces
- Package Dimensions: 6.97 x 3.27 x 1.54 inches
- Special Feature: Ergonomic design
- Max Number of Supported Devices: 1
7. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Specific warranty terms may vary.
