1. Introduction
This manual provides essential information for the safe and efficient use of your LEXMAN LED Filament Globe Bulb. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Ensure the power supply is switched off before installing or replacing the bulb.
- Do not use this bulb with dimmers unless explicitly stated as dimmable (this product is not specified as dimmable).
- Do not disassemble or modify the bulb.
- Avoid touching the bulb when it is operating or immediately after it has been switched off, as it may be hot.
- This bulb is designed for indoor use in dry environments.
- Dispose of used bulbs according to local regulations.
3. Product Overview
The LEXMAN LED Filament Globe Bulb combines a classic vintage aesthetic with modern LED technology, offering energy efficiency and a long lifespan. It provides a warm white light suitable for various indoor applications.
Figure 3.1: A clear LEXMAN LED filament globe bulb with an E27 screw base, showcasing the internal LED filaments.
Figure 3.2: An infographic highlighting key features: 1055 lumens, 2700 Kelvin warm white light, E27 base, 7.8W power consumption (equivalent to 75W incandescent), and instant-on functionality (95% intensity in less than 0.5 seconds).
4. Setup and Installation
- Power Off: Before installation, ensure the power supply to the fixture is completely switched off at the main circuit breaker.
- Check Compatibility: Verify that your light fixture has an E27 socket and is rated for the bulb's wattage (7.8W).
- Screw In: Carefully screw the LEXMAN LED Filament Globe Bulb into the E27 socket until it is snug. Do not overtighten.
- Power On: Restore power to the fixture at the main circuit breaker.
- Test: Switch on the light to confirm proper operation.
Figure 4.1: The product packaging for the LEXMAN LED Globe Bulb, displaying product specifications and branding, which can be referenced during installation.
5. Operating Instructions
The LEXMAN LED Filament Globe Bulb operates like a standard light bulb. Simply use the wall switch or fixture switch to turn the light on or off. The bulb provides instant illumination, reaching 95% intensity in less than 0.5 seconds.
- Light Output: 1055 lumens, providing bright illumination equivalent to a 75W incandescent bulb.
- Color Temperature: 2700 Kelvin, producing a warm white light for a comfortable ambiance.
- Energy Efficiency: Consumes only 7.8W, offering significant energy savings compared to traditional bulbs.
6. Maintenance
- Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb gently with a soft, dry cloth. Do not use liquid cleaners.
- Replacement: With an average lifespan of 15,000 hours, this bulb requires infrequent replacement. When replacement is necessary, follow the installation steps in Section 4.
- Storage: If storing the bulb, keep it in its original packaging in a cool, dry place.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. |
|
|
| Bulb flickers. |
|
|
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LEXMAN |
| Model Number | 3276007280418 |
| Bulb Type | LED Filament Globe |
| Base Type | E27 |
| Power Consumption | 7.8 Watts |
| Incandescent Equivalent | 75 Watts |
| Luminous Flux | 1055 Lumens |
| Color Temperature | 2700 Kelvin (Warm White) |
| Voltage | 220 Volts (AC) |
| Diameter | 95 mm |
| Dimensions (L x W x H) | 140 mm (Height) x 95 mm (Diameter) |
| Item Weight | 110 g |
| Average Lifespan | 15,000 Hours |
| Special Features | Instant-on, Energy Efficient |
Figure 8.1: Technical diagram illustrating the bulb's dimensions: 95mm diameter and 140mm height.
9. Warranty and Support
Specific warranty details and direct support contact information are not available in the provided product data. For warranty claims or technical assistance, please refer to the retailer or manufacturer's official website, or contact their customer service department using the information provided at the point of purchase.
LEXMAN is committed to providing safe, durable, and smart electrical products.
