FEZIBO 40 x 24 Inch Electric Standing Desk with Double Drawer Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your FEZIBO 40 x 24 Inch Height Adjustable Electric Standing Desk. Please read this manual thoroughly before assembly and use to ensure proper function and safety.

2. Safety Information

• Ensure all components are present and undamaged before assembly.
• Keep children and pets away from the desk during operation.
• Do not overload the desk. Refer to specifications for weight capacity.
• Ensure the power cord is not pinched or damaged.
• Only use the provided power adapter.
• Avoid placing liquids directly on the control panel or motor components.
• If the desk makes unusual noises or stops functioning, disconnect power and contact support.

3. Package Contents

Verify that all the following components are included in your package:

• Desktop Surface with Integrated Drawers
• Desk Legs (2)
• Crossbar/Frame Components
• Control Panel
• Power Adapter and Cable
• Hardware Kit (screws, tools)
• Desk Hooks (2)
• Height-Adjustable Feet (4)

4. Setup and Assembly

Assembly of the FEZIBO standing desk is designed to be straightforward. A detailed installation video is available for reference. The package includes all necessary assembly tools and instructions.

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Attach the desk legs to the desktop surface using the provided hardware. Ensure all screws are tightened securely.
3. Connect the crossbar components between the legs for added stability.
4. Mount the control panel to the underside of the desk in a convenient location.
5. Connect the motor cables and power adapter to the control box and then to a power outlet.
6. Attach the desk hooks to the desired locations on the desk frame.
7. Adjust the height-adjustable feet to ensure the desk is level and stable on your floor.

Image 4.1: Product Dimensions. This diagram illustrates the overall dimensions of the desk, including its 40-inch width, 24-inch depth, and the adjustable height range from 27.36 inches to 45.06 inches.

Image 4.2: Sturdy Steel Construction. This image details the industrial-grade alloy steel frame, emphasizing its telescopic range, durability tested for 50,000 lift cycles, and quiet operation below 50 dB.

5. Operating Instructions

5.1. Electric Height Adjustment

The desk features an electric motor for smooth height adjustments. Use the UP and DOWN buttons on the control panel to raise or lower the desk. The height can be adjusted between 27.36 inches and 46.06 inches.

5.2. Memory Presets

The control panel includes two programmable memory height buttons. To set a memory position:

1. Adjust the desk to your desired height using the UP or DOWN buttons.
2. Press and hold one of the memory buttons (e.g., '1' or '2') until you hear a beep or the display flashes, indicating the height has been saved.
3. To recall a saved height, simply press the corresponding memory button.

5.3. Anti-Collision Technology

The desk is equipped with anti-collision technology. If the desk encounters an obstacle during height adjustment, it will automatically reverse approximately 2 cm to prevent damage or injury.

5.4. Reset Function

If the desk encounters an issue or needs to be recalibrated, perform a reset:

• Press and hold the DOWN button for 5 seconds until the desk moves to its lowest position and then slightly up, indicating a successful reset.

5.5. Double Drawer Organization

Utilize the two integrated drawers for convenient storage of office supplies, documents, and personal items, helping to keep your desktop tidy.

5.6. Desk Hooks

The two included hooks can be attached to the desk frame to hang headphones, bags, or other accessories.

Image 5.1: Sitting and Standing Height Adjustment. This image demonstrates the desk's adjustable height range, showcasing its lowest position suitable for sitting (27.36 inches) and its highest position for standing (45.06 inches).

Image 5.2: Dual-Drawer Organization. A close-up view highlighting the two integrated drawers, with internal dimensions of 12 x 9 x 4.5 inches, designed for efficient storage and organization.

Image 5.3: Anti-Collision Technology. This illustration visually explains how the desk's anti-collision system detects obstacles during movement and automatically reverses to prevent damage.

Image 5.4: Desk Hooks and Frame Base. This image highlights the convenient desk hooks for hanging items and showcases the stable design of the desk's frame base.

6. Maintenance

• Cleaning: Wipe the desk surface and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Cable Management: Regularly check and organize cables to prevent tangles and damage.
• Motor Inspection: Periodically check for any loose connections or unusual noises from the motor.

7. Troubleshooting

If you encounter any issues with your FEZIBO standing desk, refer to the following common solutions:

• Desk Not Moving: Ensure the power cable is securely connected to both the desk and the power outlet. Check if the power outlet is functional.
• Error Code Displayed: If an error code appears on the control panel, try performing a reset (refer to Section 5.4). If the error persists, disconnect power for 10 minutes and try again.
• Desk Stops During Adjustment: The anti-collision feature may have been triggered. Remove any obstacles and try adjusting the height again.
• Unusual Noise: Ensure all assembly screws are tight. If the noise persists, contact customer support.

8. Specifications

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact FEZIBO customer service. Refer to your purchase documentation for specific contact details or visit the official FEZIBO website.