Yaheetech Vintage Accent Coffee Table with Open Storage Shelf

Important Safety Information

Please read all instructions carefully before assembly and use. Retain this manual for future reference.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or damaged.
• Assemble the product on a soft, clean surface to prevent scratches.
• Do not overtighten screws during assembly, as this may damage the material.
• Keep small parts away from children during assembly to avoid choking hazards.
• Do not stand or sit on the table.
• Distribute weight evenly on the table surfaces. Do not exceed the recommended weight capacity.
• Periodically check all connections and re-tighten if necessary to maintain stability.

Package Contents

Verify that all components listed below are included in your package:

• Top Shelf (1)
• Bottom Shelf (1)
• Metal Frame/Legs (4)
• Adjustable Feet (4)
• Hardware Pack (Screws, Allen Wrench)
• Instruction Manual (1)

Tools Required

• Included Allen Wrench
• Phillips Head Screwdriver (not included, recommended for easier assembly)

Setup and Assembly

Follow these steps to assemble your Yaheetech Coffee Table:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface. Refer to the 'Package Contents' section to ensure all parts are present.
2. Attach Adjustable Feet to Metal Frames: Screw the adjustable feet into the bottom of each metal frame/leg. Do not overtighten. These feet help prevent wobbling and protect your floor.
   

   Image: Adjustable foot being installed on a table leg, showing the rotation for adjustment.

3. Assemble the Bottom Shelf: Attach the metal frames/legs to the bottom shelf using the provided screws and Allen wrench. Ensure the frame is oriented correctly so that the top shelf can be attached later. Securely tighten all screws.
4. Attach the Top Shelf: Carefully place the top shelf onto the assembled frame. Align the pre-drilled holes on the top shelf with the holes on the metal frames. Insert and tighten the remaining screws using the Allen wrench or a Phillips head screwdriver.
   

   Image: The fully assembled coffee table, showcasing its two-tier design and metal frame.

5. Final Check and Adjustment: Once fully assembled, gently shake the table to ensure stability. If any wobbling occurs, adjust the leveling feet by rotating them until the table is stable on your floor surface.

Operating Instructions

The Yaheetech Coffee Table is designed for indoor use as a functional and decorative piece of furniture.

• Placement: Position the coffee table on a flat, stable surface in your living area. Ensure it does not obstruct walkways.
• Storage: Utilize the open storage shelf for books, magazines, remote controls, or decorative items. Avoid placing excessively heavy objects on either shelf.
• Surface Use: The top surface is suitable for beverages (use coasters to prevent rings), small electronics, and other common living room items.
  

  Image: A top-down perspective of the coffee table, demonstrating its utility for holding various items.

Maintenance and Care

Proper care will extend the life and appearance of your coffee table.

• Cleaning: Wipe the surfaces with a damp cloth. For stubborn marks, use a mild, non-abrasive cleaner. Dry immediately with a clean cloth. Avoid harsh chemicals or abrasive cleaning materials.
• Spills: Clean up spills immediately to prevent staining, especially on the wood-look surfaces.
• Protection: Use coasters under drinks and placemats under hot items to protect the table surface from heat and moisture damage.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary.

Troubleshooting

• Table is Wobbly:
  Solution: Check that all screws are securely tightened. Adjust the leveling feet on the bottom of the legs until the table is stable on your floor.
• Scratches on Surface:
  Solution: Minor scratches may be concealed with furniture repair markers or polishes designed for wood-look finishes. Prevent future scratches by using protective pads under items.
• Difficulty Assembling:
  Solution: Review the assembly steps carefully. Ensure you are using the correct hardware for each step. Do not force parts together. If issues persist, contact customer support.

Specifications

Image: Detailed dimensions of the coffee table, including length, width, height, and shelf clearance.

Warranty and Support

Yaheetech is committed to providing quality products. For any questions regarding assembly, missing parts, or product defects, please contact Yaheetech customer support. Please have your purchase information and model number (B09B1M9DH4) ready when contacting support.

For the most current warranty information, please refer to the official Yaheetech website or your purchase documentation.

You can visit the Yaheetech Store for more information: Yaheetech Store