Introduction
Thank you for choosing the KRAUS Kore KWU111-21 Undermount Workstation Kitchen Sink. This manual provides essential information for the proper installation, operation, and maintenance of your new sink. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Setup and Installation
The KRAUS Kore KWU111-21 sink is designed for undermount installation, creating a seamless transition with your countertop. The kit includes all necessary hardware and a template for precise installation.
Pre-Installation Checklist:
- Verify all components are present: sink, cutting board, protective bottom grid, drain assembly with cover, hardware, and template.
- Ensure minimum cabinet size is 24 inches.
- Review local plumbing codes and regulations.
Installation Steps:
- Prepare Countertop: Use the provided template to mark and cut the countertop opening.
- Apply Sealant: Apply a bead of silicone sealant around the rim of the sink opening on the underside of the countertop.
- Position Sink: Carefully lift the sink and align it with the countertop opening. Press firmly to ensure a good seal.
- Secure Mounting Clips: Attach and tighten the mounting clips to secure the sink to the countertop.
- Install Drain Assembly: Install the drain assembly according to the manufacturer's instructions, ensuring a watertight seal.
- Connect Plumbing: Connect the sink to your existing plumbing system.
Operating Instructions
The Kore workstation sink features an integrated ledge designed to support various accessories, enhancing your kitchen workflow.
Workstation Features:
- Integrated Ledge: Allows accessories to slide across the sink, creating a versatile workspace for meal prep and cleanup.
- Bamboo Cutting Board: Use for chopping and food preparation directly over the sink. Its non-slip design and drainage groove help contain messes.
- Roll-Up Dish Rack: Ideal for drying dishes, fruits, and vegetables, or as a trivet for hot pots and pans.
- Protective Bottom Grid: Placed at the bottom of the sink, it protects the surface from scratches and dents while promoting better drainage.
- Drain Assembly with Cover: The stainless steel drain assembly includes a removable strainer to prevent debris from entering the drainpipe. The decorative cover provides a clean aesthetic.
Maintenance
Proper care ensures the longevity and appearance of your KRAUS Kore sink.
Cleaning Instructions:
- Daily Cleaning: Wipe the sink with a dry, soft cloth after each use to prevent water spots and mineral buildup.
- Deep Cleaning: For stubborn stains, use a non-abrasive cleaner specifically designed for stainless steel. Always rinse thoroughly and dry immediately.
- Avoid: Do not use steel wool, abrasive pads, or harsh chemical cleaners (e.g., bleach, ammonia) as these can damage the satin finish.
- Accessories: Clean the bamboo cutting board with mild soap and water, and periodically treat with mineral oil to maintain its condition. The roll-up rack and bottom grid can be washed with dish soap and water.
Troubleshooting
If you encounter any issues with your KRAUS Kore sink, refer to the following common solutions:
- Water Spots/Stains: Ensure the sink is wiped dry after each use. For existing spots, use a stainless steel cleaner and polish.
- Slow Drainage: Check the drain assembly for any blockages. Ensure the sink's sloped bottom and channel grooves are clear.
- Scratches: While 16-gauge stainless steel is highly durable, minor scratches can occur over time. The included bottom grid helps minimize this. For deeper scratches, consult a professional for stainless steel refinishing.
- Noise: The sink is equipped with NoiseDefend sound dampening pads. If excessive noise is present, ensure the pads are securely attached and the sink is properly installed.
Specifications
| Feature | Detail |
|---|---|
| Brand | Kraus |
| Model Number | KWU111-21 |
| Color | Stainless Steel |
| Material | Stainless Steel (16 Gauge) |
| Outer Sink Dimensions | 21" L x 19" W x 10.5" D |
| Bowl Dimensions | 19" L x 16" W x 10" D |
| Minimum Cabinet Size | 24" |
| Installation Type | Undermount |
| Finish Type | Satin |
| Item Weight | 18.96 Pounds |
| Included Components | Heavy-duty bamboo cutting board, protective stainless steel bottom grid, drain assembly and decorative drain cover, Sink |
Warranty Information
The KRAUS Kore KWU111-21 Kitchen Sink comes with a Limited Lifetime Warranty. This warranty covers defects in material and manufacturing under normal use. For full details regarding warranty coverage, terms, and conditions, please refer to the official KRAUS website or contact customer support.
Customer Support
For further assistance, technical support, or to inquire about replacement parts, please contact KRAUS customer service. You can find contact information on the official KRAUS website or through your product retailer.
Online Resources: Visit the Kraus Store on Amazon for additional product information and accessories.
