1. Product Overview
The IKEA STIG Bar Stool with backrest is designed for comfortable seating at bar height. Its simple design and durable materials make it suitable for various home environments. This stool is stackable for convenient storage and features a footrest for a relaxed sitting posture.
Figure 1: Front view of the IKEA STIG Bar Stool with backrest.
Figure 2: Side view of the IKEA STIG Bar Stool, highlighting its profile and footrest.
2. Setup and Assembly
This bar stool requires assembly. Please ensure all components are present before beginning. Refer to the included assembly instructions (if provided in packaging) for detailed steps. A basic overview is provided below.
2.1 Components
- Frame (Steel, Epoxy powder coating)
- Seat and Backrest (Polypropylene plastic)
- Fasteners (screws, nuts, etc.)
2.2 Assembly Steps (General Guidance)
- Unpack all parts and lay them out on a clean, soft surface to prevent scratches.
- Identify the frame components and the seat/backrest unit.
- Attach the seat and backrest to the frame using the provided fasteners. Ensure all connections are secure but do not overtighten initially.
- Once all parts are loosely assembled, place the stool on a flat surface and gently tighten all screws. This helps ensure the stool is level and stable.
- Verify the stability of the stool before use.
Important Note: If any screws do not fit correctly or are missing, please contact IKEA customer support or the retailer for replacement parts. Do not attempt to force ill-fitting components.
Figure 3: Dimensional diagram of the IKEA STIG Bar Stool, showing height, width, and depth measurements.
3. Operating and Usage
The IKEA STIG Bar Stool is designed for comfortable and practical use in various settings.
3.1 Intended Use
- Suitable for indoor use in home environments.
- Designed for bar table heights between 101-106 cm (approximately 39.7-41.7 inches).
- The integrated footrest provides support for a relaxed sitting posture.
3.2 Stacking Feature
The STIG bar stool is stackable, allowing multiple stools to be stored efficiently without occupying excessive floor space. To stack, lift one stool and carefully place it onto another, aligning the frames.
Figure 4: Two IKEA STIG Bar Stools demonstrating the stackable feature for space-saving storage.
Figure 5: IKEA STIG Bar Stools positioned at a kitchen bar, illustrating typical usage.
4. Maintenance and Care
Proper care ensures the longevity and appearance of your IKEA STIG Bar Stool.
4.1 Cleaning Instructions
- Wipe clean with a mild soapy solution.
- Wipe dry with a clean, soft cloth immediately after cleaning to prevent water spots or streaks.
- Avoid using abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the finish of the steel frame and polypropylene plastic.
4.2 General Care
- For maximum quality and safety, re-tighten all assembly screws when necessary, typically every 3-6 months, or if the stool feels wobbly.
- Protect the stool from direct sunlight and excessive heat to prevent material degradation.
Figure 6: Close-up view of the polypropylene plastic seat, showing its textured surface for grip and durability.
Figure 7: Detail of the footrest, designed for user comfort and support.
5. Troubleshooting
This section addresses common issues you might encounter with your bar stool.
5.1 Stool is Wobbly
- Cause: Loose assembly screws.
- Solution: Carefully re-tighten all screws on the frame and seat connections. Ensure the stool is on a flat, level surface when tightening to prevent unevenness.
5.2 Parts Do Not Fit During Assembly
- Cause: Incorrect orientation of parts, manufacturing defect, or incorrect fasteners.
- Solution: Double-check the assembly instructions to ensure parts are oriented correctly. If parts still do not fit or fasteners are faulty, do not force them. Contact IKEA customer support or the retailer for assistance and replacement parts.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | STIG |
| Brand | IKEA |
| Color | Black |
| Product Dimensions (D x W x H) | 29.13" x 21.26" x 11.02" (approximate assembled footprint) |
| Seat Height | 74 cm (29 1/8 ") |
| Total Height | 100 cm (39 3/8 ") |
| Item Weight | 4.96 pounds |
| Number of Pieces | 1 (assembled unit) |
| Frame Material | Steel, Epoxy powder coating |
| Seat/Back Material | Polypropylene plastic |
| Suitable Bar Table Height | 101-106 cm (39.7-41.7 inches) |
| Product Care Instructions | Wipe with Dry Cloth / Mild soapy solution |
| Safety Standards | Meets EN 12520 and EN 1022 for home use durability and safety. |
7. Warranty and Support
7.1 Warranty Information
Specific warranty details for the IKEA STIG Bar Stool are typically provided at the point of purchase or on the official IKEA website. Please retain your proof of purchase for any warranty claims. For detailed information regarding warranty coverage and duration, refer to the documentation included with your product or visit the IKEA customer service portal.
7.2 Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or defective part, please contact IKEA customer service directly. You can usually find contact information on the IKEA website or on your purchase receipt.
- Visit the official IKEA website for support resources.
- Refer to your purchase documentation for retailer-specific support.