1. Product Overview
The Santa Fe Ultra70 Ventilating Dehumidifier is designed to control humidity levels and improve indoor air quality in your home. This unit efficiently removes up to 70 pints of moisture per day, helping to prevent mold growth, dust mites, and other issues associated with high humidity. It features a MERV-13 air filter for enhanced air purification and is suitable for whole-home dehumidification applications.
This dehumidifier is built with durable components and a heavy-duty steel exterior, ensuring longevity and reliable performance in various environments.
Figure 1.1: Front view of the Santa Fe Ultra70 Ventilating Dehumidifier, showcasing its compact design and the Santa Fe Dehumidifiers logo.
Figure 1.2: The Santa Fe Ultra70 Dehumidifier positioned on adjustable feet, illustrating its capability to remove up to 70 pints of moisture per day.
Figure 1.3: A worker assembling a Santa Fe dehumidifier, indicating that the product is Made in the USA.
2. Safety Information
Please read all instructions carefully before operating the dehumidifier. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always ensure the unit is properly grounded.
- Do not operate the unit with a damaged power cord or plug.
- Do not block air inlets or outlets. Ensure adequate clearance around the unit for proper airflow.
- Do not immerse the unit in water or allow water to enter the electrical components.
- Unplug the unit before performing any maintenance or cleaning.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. What's Included
Upon unpacking your Santa Fe Ultra70 Ventilating Dehumidifier, please verify that all components listed below are present:
- Santa Fe Ultra70 Dehumidifier Unit
- User Manual (this document)
- Leveling Feet (4)
- MERV 13 Air Filter (pre-installed or separate)
Figure 3.1: Image showing the Santa Fe Ultra70 Dehumidifier unit, four leveling feet, and a MERV 13 filter, which are included with the product.
4. Setup and Installation
Proper installation is crucial for the optimal performance of your dehumidifier. The Santa Fe Ultra70 is designed for various installation scenarios, including basements, crawl spaces, and ducted whole-home applications.
4.1 Placement
Choose a location that allows for adequate airflow around the unit. Ensure the unit is placed on a level surface. If installing in a crawl space or basement, consider elevating the unit to protect it from potential water damage.
4.2 Leveling
Attach the four leveling feet to the bottom of the unit. Adjust the feet to ensure the dehumidifier is perfectly level. This is important for proper condensate drainage.
4.3 Drainage
The unit requires continuous drainage. Connect a suitable drain hose (not included) to the condensate drain port. Route the hose to a floor drain, condensate pump, or other suitable drainage point, ensuring a continuous downward slope for gravity drainage.
4.4 Electrical Connection
Plug the dehumidifier into a dedicated 115V, 15 Amp grounded electrical outlet. Do not use extension cords or adapter plugs.
4.5 Ducting (Optional)
For whole-home ventilation and dehumidification, the Ultra70 can be ducted. Consult a qualified HVAC professional for proper ducting installation to ensure optimal performance and air distribution.
Figure 4.1: The Santa Fe Ultra70 Dehumidifier showing its approximate dimensions of 12 inches in height, 12 inches in depth, and 28 inches in length, important for planning installation space.
5. Operating Instructions
The Santa Fe Ultra70 Dehumidifier is designed for straightforward operation. Note that a separate controller is typically required for full functionality and precise humidity control.
5.1 Initial Power-Up
Once the unit is properly installed and connected to power, it will be in standby mode. The unit has a simple ON/OFF switch located on the control panel.
5.2 Using an External Controller
For optimal performance and automated humidity control, it is recommended to connect an external dehumidistat or ventilation controller (purchased separately). These controllers allow you to set a desired humidity level, schedule operation, and manage ventilation functions.
- Refer to the instruction manual of your specific external controller for detailed programming and operation procedures.
- Common settings include target relative humidity (e.g., 50-55% RH) and fan operation modes.
Figure 5.1: The Santa Fe Ultra70 Dehumidifier control panel area, highlighting its suitability for whole-home dehumidification, the MERV-13 air filter, and the note that the controller is purchased separately.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your Santa Fe Ultra70 Dehumidifier.
6.1 Air Filter Replacement
The MERV-13 air filter should be inspected monthly and replaced every 3-6 months, or more frequently depending on usage and air quality. A dirty filter restricts airflow and reduces dehumidifier efficiency.
- Unplug the dehumidifier from the power outlet.
- Locate the filter access panel (refer to unit diagram in full manual).
- Remove the old filter and dispose of it properly.
- Insert a new MERV-13 filter, ensuring it is oriented correctly according to the airflow arrow.
- Close the filter access panel.
6.2 Coil Cleaning
Periodically inspect the evaporator and condenser coils for dust and debris. If coils are dirty, gently clean them with a soft brush or vacuum cleaner. For heavy buildup, specialized coil cleaner may be required. Consult a professional if unsure.
6.3 Drain Line Maintenance
Ensure the condensate drain line remains clear and free of obstructions. Flush the drain line with a mild bleach solution (1 part bleach to 16 parts water) annually to prevent algae and mold growth.
7. Troubleshooting
This section provides solutions to common issues you might encounter with your Santa Fe Ultra70 Dehumidifier. For problems not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Dehumidifier not operating | No power; Unit switch off; External controller setting; Full drain pan (if applicable) | Check power connection and circuit breaker; Turn unit switch ON; Adjust controller settings; Check and clear drain line. |
| Insufficient moisture removal | Dirty air filter; Restricted airflow; Low ambient temperature; Unit too small for space; External controller setting | Clean or replace air filter; Ensure no obstructions around unit; Unit operates best above 60°F (15°C); Consider additional unit or professional assessment; Adjust controller to lower humidity setpoint. |
| Unusual noise | Loose parts; Unit not level; Fan obstruction | Inspect for loose components; Ensure unit is level using adjustable feet; Check for debris in fan area (unplug first). |
| Water leaking | Clogged drain line; Improper drain hose connection; Unit not level | Clear drain line; Re-secure drain hose connection; Level the unit. |
8. Specifications
| Attribute | Detail |
|---|---|
| Model | Ultra70 |
| Moisture Removal Capacity | Up to 70 Pints/Day |
| Product Dimensions (L x W x H) | 32 x 17 x 17 inches |
| Item Weight | 71 pounds |
| Manufacturer | Santa Fe |
| ASIN | B099X8WB73 |
| Included Components | User Manual, Dehumidifier |
| Filter Type | MERV 13 |
Figure 8.1: The Santa Fe Ultra70 Dehumidifier, emphasizing its durable parts and heavy-duty steel exterior designed to withstand tough environments.
9. Warranty and Support
The Santa Fe Ultra70 Ventilating Dehumidifier comes with a manufacturer's warranty. Please refer to the warranty card included with your product or visit the official Santa Fe website for detailed warranty terms and conditions.
For technical assistance, troubleshooting beyond this manual, or to inquire about replacement parts, please contact Santa Fe customer support:
- Manufacturer: Santa Fe
- Website: www.santa-fe-products.com (Example link, actual link may vary)
- Phone: Refer to manufacturer's website for current contact numbers.
When contacting support, please have your product model number (Ultra70) and ASIN (B099X8WB73) ready for quicker service.
