Introduction
This user manual provides comprehensive instructions for the assembly, operation, maintenance, and troubleshooting of your TMS Southport Mid Century Modern 2-Door Dining Room Buffet Cabinet. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and safe operation.
Safety Information
WARNING: Some assembly is required. Please follow the instructions carefully to avoid injury. Always use appropriate tools and safety gear during assembly. Keep small parts away from children. Ensure all connections are secure before use.
- Always assemble the unit on a soft, clean surface to prevent scratches.
- It is recommended that two people assemble this cabinet for ease and safety.
- Do not overtighten screws, as this may damage the material.
- Do not stand or climb on the cabinet.
- Distribute weight evenly on shelves and the top surface to prevent tipping.
Package Contents
Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Top Panel
- Bottom Panel
- Side Panels (2)
- Back Panel
- Adjustable Shelf (1)
- Cabinet Doors (2)
- Legs (4)
- Hardware Pack (screws, dowels, cam locks, hinges, door pulls, shelf pins)
- Assembly Instructions
Setup and Assembly
Follow these steps carefully for proper assembly of your buffet cabinet. It is recommended to have a second person assist with assembly.
Step 1: Unpack and Identify Parts
Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify each part by comparing it to the parts list in your assembly instructions. Ensure all hardware is present.
Figure 1: Cabinet Dimensions. This image illustrates the overall dimensions of the Southport Buffet Cabinet, measuring 45 inches in width, 20 inches in depth, and 36 inches in height.
Step 2: Assemble the Base Frame
Attach the legs to the bottom panel using the provided hardware. Ensure they are securely fastened. Connect the side panels to the bottom panel, following the pre-drilled holes.
Step 3: Install the Back Panel and Top Panel
Slide the back panel into the grooves of the side panels. Secure the top panel to the assembled frame. Ensure all cam locks and screws are tightened for stability.
Step 4: Attach Cabinet Doors and Shelf
Attach the hinges to the cabinet doors and then to the main frame. Install the door pulls. Insert the shelf pins into the desired height for the adjustable shelf and place the shelf on top of the pins.
Figure 2: Interior Storage and Adjustable Shelf. This image shows the cabinet with one door open, highlighting the adjustable shelf and the ample storage space available for items like dishes and bowls.
Figure 3: Assembled Cabinet Front View. This image displays the fully assembled Southport Buffet Cabinet from the front, showcasing its two closed doors and the open top shelf.
Figure 4: Cabinet in Use. This image demonstrates the Southport Buffet Cabinet in a dining room environment, styled with various items on its top surface and open shelf, illustrating its functional and aesthetic appeal.
Operating Instructions
The Southport Buffet Cabinet is designed for versatile storage and display. Here are some operational guidelines:
- Adjusting Shelves: To adjust the height of the interior shelf, remove any items from the shelf. Carefully lift the shelf and remove the four shelf pins. Reinsert the pins into the desired holes at the new height, ensuring they are level, then place the shelf back onto the pins.
- Door Operation: The two cabinet doors open outwards. Use the provided door pulls to open and close them smoothly. Ensure doors are fully closed to protect contents.
- Weight Capacity: Distribute weight evenly across the top surface and shelves. Avoid placing excessively heavy items on any single point.
Maintenance and Care
Proper care will extend the life and appearance of your cabinet.
- Cleaning: Wipe surfaces with a soft, damp cloth. For general cleaning, a mild soap solution can be used, followed by drying with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Surface Protection: The cabinet's material can scratch easily. Use coasters or protective mats under items placed on the top surface, especially under appliances or decorative objects.
- Liquid Spills: If liquids are spilled on the surface, wipe them immediately. Water can leave temporary stains that typically disappear once dry, but prompt cleaning is recommended to prevent potential damage.
- Door Alignment: Periodically check door hinges and adjust if necessary to ensure proper alignment and smooth operation.
- Environmental Conditions: Avoid placing the cabinet in direct sunlight or near heat sources, as this can cause fading or warping. Maintain a stable room temperature and humidity.
Troubleshooting
This section addresses common issues you might encounter with your cabinet.
| Problem | Possible Cause | Solution |
|---|---|---|
| Doors do not align or close properly. | Hinges are loose or misaligned; cabinet not level. | Tighten hinge screws. Adjust hinges as per assembly instructions. Ensure the cabinet is on a level surface. |
| Strong chemical smell. | New product off-gassing. | Ventilate the room thoroughly. The smell should dissipate over time. |
| Surface scratches easily. | Normal wear and tear; lack of protective measures. | Use protective mats, coasters, or contact paper under items. Handle with care. |
| Temporary water stains on surface. | Liquid spills. | Wipe spills immediately. Stains typically disappear once dry. |
Specifications
| Brand | TMS |
| Model Number | 83670 |
| Color | White |
| Product Dimensions | 45"W x 20"D x 36"H |
| Item Weight | 84 Pounds |
| Material | MDF, Solid Wood Legs, Iron Frame |
| Number of Shelves | 2 (1 adjustable) |
| Number of Doors | 2 |
| Assembly Required | Yes |
| Recommended Use | Dining Room, Kitchen, Accent Furniture, Storage |
| UPC | 024319836709 |
Warranty and Support
Target Marketing Systems (TMS) has been committed to innovation, quality, and affordability since 1985. For specific warranty information or technical support, please refer to the documentation included with your purchase or contact TMS customer service directly. Contact details can typically be found on the manufacturer's website or on your purchase receipt.
Note: No specific warranty period or detailed support contact information was provided in the product data. Please consult the manufacturer's official channels for the most current information.
