FUNSNAP Capture 2S Gimbal Stabilizer User Manual

Introduction

The FUNSNAP Capture 2S is a 3-axis gimbal stabilizer designed for smartphones, providing smooth and stable video recording. It features a focus wheel, face tracking capabilities, and compatibility with both iPhone and Android devices. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your device.

Product Overview

The Capture 2S gimbal stabilizer is engineered to enhance your mobile videography experience. Key features include:

• 3-Axis Stabilization: Ensures stable and shake-free footage.
• Focus Wheel: Provides precise control over focus during recording.
• Face Tracking: Automatically keeps subjects in frame.
• Horizontal and Vertical Screen Switch: Quick transition for different video formats.
• Long Battery Life: Up to 11 hours of operation on a single charge.
• High Payload Capacity: Supports smartphones weighing up to 0.66 lbs (300g).
• Capture2 App Integration: Unlocks advanced features like AI tracking, gesture control, and creative templates.

Figure 1: FUNSNAP Capture 2S Gimbal Stabilizer, including the main unit, mini tripod, and USB-C charging cable.

Setup

1. Charge the Gimbal: Before first use, fully charge the gimbal using the provided USB-C cable. The charging indicator light will show charging status. A full charge typically takes 2 hours.
2. Mount Your Smartphone:
   • Extend the phone clamp and securely place your smartphone in the center.
   • Ensure the phone is balanced. If the phone tilts to one side, adjust its position within the clamp until it remains level when the gimbal is powered off. Proper balancing is crucial for optimal performance and battery life.
3. Attach the Tripod (Optional): Screw the mini tripod onto the 1/4-inch screw hole at the bottom of the gimbal handle for stable placement on flat surfaces.
4. Download the Capture2 App: Search for "Capture2" in your smartphone's app store (App Store for iOS, Google Play Store for Android) and install the application.
5. Power On: Press and hold the power button for a few seconds until the indicator lights illuminate.
6. Connect via Bluetooth: Open the Capture2 app, enable Bluetooth on your phone, and connect to the "Capture 2S" device listed in the app.

Operating Instructions

Basic Controls

• Power Button: Press and hold to power on/off. Single press to check battery level.
• Joystick: Controls pan and tilt movements of the smartphone.
• Shutter Button: Single press to take a photo or start/stop video recording within the Capture2 app.
• Mode Button: Cycles through different gimbal modes (e.g., Pan Follow, Lock Mode, POV). Refer to the app for detailed mode descriptions.
• Focus Wheel: Rotate to adjust focus or zoom, depending on the selected mode in the Capture2 app.
• Horizontal/Vertical Switch: Press the dedicated button to quickly switch between landscape and portrait orientations.

Advanced Features (via Capture2 App)

The Capture2 app unlocks the full potential of your gimbal. Ensure your gimbal is connected to the app via Bluetooth.

Figure 2: Demonstration of the gimbal's stabilization capabilities, showing a clear difference between unstabilized and stabilized footage.

• AI Tracking (Face/Object Tracking):
  • Activate AI tracking in the app.
  • Draw a box around the subject (face or object) on your screen. The gimbal will automatically follow the subject's movement.


Figure 3: The gimbal's object and face tracking feature in action, keeping a moving subject like a surfer in focus.

• Creative Modes: The app offers various shooting modes to enhance your videos:
  • Panorama: Captures wide-angle panoramic shots.
  • Low Angle Shot: Optimizes stabilization for low-angle filming.
  • Hitchcock (Dolly Zoom): Creates a dramatic zoom effect while maintaining subject size.
  • Inception Mode: Rotates the phone 360 degrees for a unique spinning effect.
  • Timelapse: Compresses long periods into short, sped-up videos.


Figure 4: The Creative Inception Mode allows for dynamic 320-degree rotations, adding a unique visual element to your footage.



Figure 5: The Capture2 app provides access to multiple creative modes, including Panorama, Low Angle Shot, Hitchcock, Inception Mode, and Timelapse.

• Sliding Zoom: Use the focus wheel to achieve smooth, cinematic zoom transitions.

Figure 6: The focus wheel enables precise and smooth sliding zoom functionality for dynamic video effects.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the gimbal. Avoid using liquid cleaners or solvents.
• Storage: Store the gimbal in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care:
  • Recharge the battery at least once every three months to prevent over-discharge, even if not in use.
  • Avoid fully depleting the battery frequently.
• Avoid Physical Impact: Protect the gimbal from drops or impacts, as this can damage the motors and internal components.

Troubleshooting

Problem: Gimbal does not power on.

Solution: Ensure the gimbal is fully charged. Connect it to a power source using the USB-C cable and allow it to charge for at least 30 minutes before attempting to power on again.

Problem: Gimbal is unstable or vibrates.

Solution:

• Ensure your smartphone is properly balanced in the clamp before powering on the gimbal. The phone should remain level when the gimbal is off.
• Check if the phone is securely mounted and not loose.
• Perform a gimbal calibration through the Capture2 app if available.

Problem: Cannot connect to the Capture2 app via Bluetooth.

Solution:

• Ensure Bluetooth is enabled on your smartphone.
• Restart both the gimbal and your smartphone.
• Close and reopen the Capture2 app.
• Forget the device in your phone's Bluetooth settings and try pairing again through the app.

Problem: Gimbal does not switch to vertical mode.

Solution: Ensure you are pressing the dedicated horizontal/vertical switch button. If the issue persists, check the Capture2 app for any specific settings or firmware updates that might affect this function.

Problem: Battery does not hold charge.

Solution: This could indicate a battery degradation issue. Ensure you are following proper battery maintenance guidelines (charging every three months). If the product is still under warranty, contact customer support.

Specifications

Figure 7: Detailed compatibility list for various mobile phone models and their supported functions with the FUNSNAP Capture 2S.

Warranty and Support

FUNSNAP products are designed for reliability and performance. For warranty information and customer support, please refer to the official FUNSNAP website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

For further assistance, visit the FUNSNAP Store on Amazon.