Introduction
This document provides comprehensive instructions for the NETUM 2.4G Wireless Receiver/Dongle, model NT-1950. This device is designed to establish a wireless connection between compatible NETUM barcode scanners and a host computer. Please read this manual carefully to ensure proper setup and operation.
Product Overview
The NETUM NT-1950 is a compact 2.4G wireless USB receiver, serving as a replacement or additional dongle for various NETUM wireless barcode scanners. It facilitates wireless data transmission, eliminating the need for direct cable connections between the scanner and your device.
Image: The NETUM 2.4G Wireless Receiver/Dongle, model NT-1950. This small USB device enables wireless communication for compatible barcode scanners.
Setup Instructions
Follow these steps to set up your NETUM 2.4G Wireless Receiver/Dongle:
- Insert the Dongle: Plug the NT-1950 wireless receiver into an available USB port on your computer or host device. The system should automatically recognize the device; no additional drivers are typically required.
- Power On Scanner: Ensure your compatible NETUM wireless barcode scanner is powered on and fully charged.
- Pairing Process: Most NETUM wireless scanners require a specific pairing procedure to connect with a new dongle. This usually involves scanning a special pairing barcode. If you do not have this barcode or the original manual, please contact NETUM customer support for the correct programming instructions.
- Confirmation: Once successfully paired, your barcode scanner should indicate a successful connection (e.g., a specific LED indicator or beep sound). Test the connection by scanning a barcode into a text editor or application.
Note: If your scanner does not connect automatically after inserting the dongle, it is highly likely that a pairing barcode needs to be scanned. Refer to your scanner's specific manual or contact NETUM support for assistance.
Operating Instructions
Once the NT-1950 dongle is successfully paired with your NETUM wireless barcode scanner, operation is straightforward:
- Scanning: Point your barcode scanner at the barcode you wish to read and press the trigger button.
- Data Transmission: The scanned data will be wirelessly transmitted to your computer via the NT-1950 dongle and appear in any active text field or compatible application.
- Range: Maintain the scanner within the operational range of the 2.4G wireless connection for optimal performance. Environmental factors may affect range.
Compatibility
The NETUM NT-1950 2.4G Wireless Receiver/Dongle is compatible with a wide range of NETUM wireless barcode scanners, including but not limited to:
- NT-1228BC
- NT-1228BL
- C750
- C740
- NT-W8X
- NT-M6
- NT-M8
- Other NETUM NT Series, M Series, C Series, and E Series wireless scanners.
For specific model compatibility, please refer to your scanner's product documentation or contact NETUM support.
Specifications
| Model Number | NT-1950 |
| Brand | NETUM |
| Hardware Interface | USB |
| Data Link Protocol | IEEE 802.11 (2.4G Wireless) |
| Data Transfer Rate | Up to 150 Mbps (1.5E+2 Megabits Per Second) |
| Compatible Devices | NETUM Wireless Barcode Scanners |
| Item Weight | Approximately 1 Grams (0.035 ounces) |
| Package Dimensions | 3.62 x 2.28 x 0.35 inches |
Troubleshooting
- Scanner Not Connecting:
- Ensure the NT-1950 dongle is securely plugged into a working USB port.
- Verify your barcode scanner is powered on and has sufficient battery.
- The most common issue is that the scanner needs to be paired with the new dongle. Contact NETUM customer support for the specific pairing barcode and instructions for your scanner model.
- Try plugging the dongle into a different USB port on your computer.
- No Data Transmission:
- Confirm the scanner is successfully paired with the dongle.
- Check if the scanner is within the wireless operating range of the dongle.
- Ensure there are no significant obstructions between the scanner and the dongle.
- Test scanning into a simple text editor (like Notepad) to rule out application-specific issues.
- Intermittent Connection:
- Reduce the distance between the scanner and the dongle.
- Minimize potential sources of 2.4Ghz interference (e.g., Wi-Fi routers, other wireless devices).
- Ensure the dongle is not obstructed by metal objects or other electronics.
Warranty and Support
For warranty information, technical support, or assistance with pairing and programming your NETUM barcode scanner with the NT-1950 dongle, please contact NETUM customer service. You can typically find contact details on the official NETUM website or through your purchase platform.
Manufacturer: NETUM
Date First Available: July 17, 2021
