MEKO Blink 60%

MEKO Blink 60% RGB LED Hotswap Bluetooth Mechanical Keyboard User Manual

Model: Blink 60%

1. Introduction

Thank you for choosing the MEKO Blink 60% Mechanical Keyboard. This compact and versatile keyboard features a 60% layout, RGB backlighting, hotswap switch sockets, and Bluetooth connectivity, making it suitable for various uses. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your device.

2. Package Contents

Carefully unpack your MEKO Blink keyboard and ensure all items are present. If any items are missing or damaged, please contact customer support.

  • MEKO Blink 60% Mechanical Keyboard
  • USB-C to USB-A Cable
  • Keycap Puller
  • Switch Puller
  • User Manual (this document)
MEKO Blink 60% Mechanical Keyboard and accessories in box

Image: The MEKO Blink 60% Mechanical Keyboard, USB-C cable, keycap puller, and switch puller, displayed with its packaging box.

3. Product Overview

The MEKO Blink 60% keyboard features a compact design with 61 keys, RGB backlighting, and hotswap sockets for easy switch customization.

Top view of MEKO Blink 60% Mechanical Keyboard with RGB lighting

Image: Top-down view of the MEKO Blink 60% keyboard, showcasing its 61-key layout and vibrant RGB backlighting.

Side view of MEKO Blink 60% Mechanical Keyboard showing 'BLINK' logo

Image: Side profile of the MEKO Blink 60% keyboard, highlighting its compact form factor and the 'BLINK' branding on the side.

Bottom view of MEKO Blink 60% Mechanical Keyboard with product label

Image: Underside of the MEKO Blink 60% keyboard, showing the product label with model information, FCC/CE certifications, and Bluetooth logo, along with rubber feet for stability.

4. Setup Instructions

4.1 Wired Connection

  1. Locate the USB-C port on the back of the keyboard.
  2. Connect the provided USB-C cable to the keyboard's USB-C port.
  3. Connect the USB-A end of the cable to an available USB port on your computer.
  4. The keyboard will be automatically recognized by your operating system.

4.2 Bluetooth Connection

The MEKO Blink keyboard supports connecting up to three Bluetooth devices.

  1. Ensure the keyboard is charged or connected via USB-C.
  2. Turn on the Bluetooth switch located on the bottom of the keyboard.
  3. To enter pairing mode for a specific profile, press and hold Fn + Q, Fn + W, or Fn + E for 3-5 seconds. The backlight on the selected key (Q, W, or E) will flash rapidly, indicating it is ready for pairing.
  4. On your computer or device, open Bluetooth settings and search for new devices.
  5. Select "MEKO Blink" (or similar name) from the list of available devices.
  6. Once connected, the backlight on the corresponding key (Q, W, or E) will stop flashing and remain steadily lit.
  7. To switch between paired devices, simply press Fn + Q, Fn + W, or Fn + E (do not hold).

5. Operating Instructions

5.1 Key Functions (Fn Combinations)

Due to its 60% compact layout, many functions are accessed via the Fn key combined with other keys. Secondary legends are printed on the keycaps for easy reference.

  • Fn + 1-0, -, =: F1-F12 functions (e.g., Fn+1 for F1, Fn+2 for F2, etc.)
  • Fn + P: Print Screen (PrtSc)
  • Fn + [: Scroll Lock (Scrlk)
  • Fn + ]: Pause
  • Fn + ;: Insert
  • Fn + ': Home
  • Fn + ,: Page Up (PgUp)
  • Fn + .: Delete (Del)
  • Fn + /: End
  • Fn + Shift (Right): Page Down (PgDn)
  • Fn + W, A, S, D: Arrow keys (Up, Left, Down, Right)
  • Fn + Q, W, E: Bluetooth device switching/pairing
  • Fn + Spacebar: Lock/Unlock Fn key (some models)

5.2 RGB Lighting Modes

The MEKO Blink keyboard features multiple RGB backlighting modes. Use the following combinations to control the lighting:

  • Fn + \|: Cycle through different RGB lighting effects.
  • Fn + <: Decrease backlight brightness.
  • Fn + >: Increase backlight brightness.
  • Fn + M: Decrease lighting effect speed.
  • Fn + ,: Increase lighting effect speed.

5.3 Hotswap Switches

The MEKO Blink keyboard is equipped with hotswap sockets, allowing you to easily change mechanical switches without soldering. This feature enables customization of your typing experience.

  1. Removing a Keycap: Use the provided keycap puller to gently lift the keycap straight up from the switch.
  2. Removing a Switch: Use the provided switch puller to grasp the top and bottom clips of the switch. Apply gentle pressure and pull the switch straight up. Avoid bending the pins.
  3. Installing a New Switch: Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight. Gently push the switch down until it clicks into place. If resistance is met, remove the switch and check the pins for bending.
  4. Installing a Keycap: Place the keycap over the switch stem and press down firmly until it is seated.

6. Maintenance

Proper maintenance ensures the longevity and performance of your keyboard.

  • Cleaning: Regularly clean the keyboard with a soft, dry cloth. For deeper cleaning, remove keycaps using the keycap puller and use compressed air to remove dust and debris from between the switches. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the keyboard in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For the rechargeable lithium battery, avoid fully discharging it frequently. Charge the keyboard when the battery is low to maintain battery health.

7. Troubleshooting

If you encounter issues with your MEKO Blink keyboard, refer to the following common solutions:

  • Keyboard not responding (Wired): Ensure the USB-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • Keyboard not responding (Bluetooth):
    • Ensure the Bluetooth switch on the keyboard's bottom is ON.
    • Check if the keyboard is charged.
    • Re-pair the keyboard with your device (see Section 4.2).
    • Ensure your device's Bluetooth is enabled and working correctly.
  • Keys not registering: If a specific key is not working, try removing the keycap and switch (see Section 5.3) and re-seating the switch firmly. Ensure the switch pins are not bent.
  • RGB lighting not working/stuck: Try cycling through lighting modes (Fn + \|) or adjusting brightness (Fn + </>). If the issue persists, try resetting the keyboard (if a reset function is available, consult manufacturer support).
  • Input lag in Bluetooth mode: Ensure the keyboard is close to your device and there are no significant obstructions. Minimize interference from other wireless devices.

If these steps do not resolve your issue, please contact MEKO customer support for further assistance.

8. Specifications

Brand:
MEKO
Model:
Blink 60%
Connectivity Technology:
Bluetooth, USB-C (Wired)
Keyboard Description:
Mechanical
Special Features:
RGB Backlit, Hotswap Sockets, Rechargeable Battery
Number of Keys:
61
Keycap Material:
Double Shot ABS
Switch Type:
Tactile (Cherry MX Brown variant)
Power Source:
Battery Powered with USB Power Option
Compatible Devices:
PC
Material:
Acrylonitrile Butadiene Styrene (ABS)

9. Warranty and Support

MEKO products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your purchase or visit the official MEKO website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact MEKO customer service through their official channels.

Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.