ESR Tempered Glass Screen Protector Instruction Manual

1. Product Overview

The ESR Tempered Glass Screen Protector is designed to provide robust protection for your iPhone 14 Plus or iPhone 13 Pro Max. Engineered with military-grade tempered glass, it offers superior resistance against scratches, impacts, and daily wear. The ultra-clear design ensures optimal display clarity and full Face ID compatibility, while the oleophobic coating keeps your screen clean and smudge-free. An easy installation frame and cleaning kit are included for a bubble-free application.

2. What's Included

• 3x ESR Tempered Glass Screen Protectors
• 1x Easy Installation Frame
• 1x Cleaning Kit (wet wipes, microfiber cloth, dust-removal sticker)
• Instruction Manual

3. Key Features

• Compatibility: Specifically designed for iPhone 14 Plus and iPhone 13 Pro Max.
• Military-Grade Protection: Ultra-tough tempered glass resists up to 33 lb of force, protecting your screen from scratches and damage.
• Smooth and Clean: Oleophobic coating keeps your screen smudge and fingerprint-free, making it easier to clean.
• Bubble-Free Installation: Alignment frame and cleaning kit ensure a quick, easy, and bubble-free application.
• HD Clarity: Ultra-clear glass maintains flawless display quality and ensures full Face ID compatibility.

4. Setup and Installation

Follow these steps for a perfect, bubble-free installation of your ESR Tempered Glass Screen Protector.

4.1. Preparation

1. Ensure your device is powered off and in a clean, dust-free environment.
2. Remove any existing screen protector from your device.

4.2. Cleaning the Screen

1. Use the provided wet wipe (labeled '1') to thoroughly clean the entire screen surface, removing all dust, oil, and smudges.
2. Follow with the dry wipe (labeled '2') to dry the screen completely.
3. Use the dust-removal sticker (labeled '3') to pick up any remaining dust particles. Ensure the screen is perfectly clean before proceeding.

4.3. Applying the Screen Protector

1. Place the easy installation frame onto your iPhone. It will snap securely into place, guiding the screen protector for perfect alignment.
2. Carefully peel off the protective film from the screen protector, holding it by the edges to avoid touching the adhesive side.
3. Align the screen protector with the top edge of the installation frame and gently lower it onto the phone screen. The protector will automatically adhere to the screen.
4. Once the protector is in place, gently press down the center of the screen protector and then slide your finger towards the edges to ensure full adhesion and remove any initial air bubbles.
5. Wait approximately 30 seconds for the adhesive to fully settle.
6. Carefully remove the installation frame.
7. Use the provided squeegee or microfiber cloth to gently push any remaining air bubbles towards the edges of the screen until they disappear.

Image: Easy application with the included alignment frame.

4.4. Installation Videos

5. Operating and Usage

Once installed, your ESR Tempered Glass Screen Protector is designed to seamlessly integrate with your iPhone's functionality.

• HD Clarity: Enjoy your iPhone's original display quality with ultra-clear transparency.
• Highly Responsive: The thin design ensures full touch sensitivity and compatibility with Face ID.
• Fingerprint Resistant: The oleophobic coating reduces fingerprints and smudges, keeping your screen clear.

Image: HD Clarity ensures flawless Face ID and front camera picture quality.

Image: Highly responsive touch sensitive screen protector.

Image: Fingerprint resistant special coating keeps your screen clean and clear.

6. Maintenance

To maintain the clarity and effectiveness of your screen protector, regularly wipe it with a soft, lint-free cloth. The oleophobic coating helps repel oils and fingerprints, making cleaning easy. Avoid using harsh chemicals or abrasive materials that could damage the coating.

7. Troubleshooting

7.1. Air Bubbles

• Small Bubbles: Most small bubbles will disappear naturally within 24-48 hours.
• Large Bubbles: Gently lift the nearest edge of the screen protector with your fingernail or a plastic card until the bubble is released. Re-apply the section, pushing the bubble out with the microfiber cloth.
• Dust Underneath: If a dust particle causes a bubble, carefully lift the nearest edge of the screen protector and use a dust-removal sticker to gently dab the dust off the adhesive side. Re-apply the protector.

8. Specifications

9. Warranty and Support

ESR provides comprehensive customer support for your screen protector. This includes detailed setup videos and FAQs available online, a comprehensive 12-month warranty, lifetime support, and personalized help. For any inquiries or assistance, please refer to the contact information provided with your product packaging or visit the official ESR website.