Introduction

This manual provides comprehensive instructions for the safe and efficient use of your Starfrit MightiCan Electric Can Opener. This appliance is designed for opening standard cans, sharpening knives and scissors, and opening bottles. Please read all instructions carefully before first use and retain this manual for future reference.
Important Safety Information
WARNING:
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
- Always unplug the appliance from the outlet when not in use, before putting on or taking off parts, and before cleaning.
- Do not immerse the motor unit in water or other liquids.
- Close supervision is necessary when any appliance is used by or near children.
- Avoid contact with moving parts.
- Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
- The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock, or injury.
- Do not use outdoors.
- Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach the plug to the appliance first, then plug the cord into the wall outlet. To disconnect, turn any control to "off", then remove the plug from the wall outlet.
- This appliance is intended for household use only.
- Exercise extreme caution when sharpening knives and scissors. Keep fingers clear of the sharpening slots.
Product Overview
The Starfrit MightiCan Electric Can Opener is a versatile 3-in-1 kitchen appliance. Familiarize yourself with its components:

- Magnetic Lid Holder: Secures the can lid after opening.
- Geared Wheel: Engages with the can rim to rotate the can.
- Blade: Cuts the can lid.
- Lever: Engages the blade and geared wheel with the can.
- On/Off Button: Activates and deactivates the can opening mechanism.
- Bottle Opener: Integrated feature for opening bottle caps.
- Knife & Scissor Sharpener: Built-in slots for sharpening kitchen knives and scissors.
- Cord Storage: Compartment for neat storage of the power cord.
Setup
- Unpack: Carefully remove the can opener from its packaging.
- Placement: Place the can opener on a stable, flat surface, such as a kitchen counter. Ensure it is near an electrical outlet.
- Power Connection: Unwind the power cord from the cord storage area at the back of the unit. Plug the cord into a standard electrical outlet.
- Initial Cleaning: Before first use, wipe the exterior of the unit with a damp cloth. The removable lever can be detached and washed with warm, soapy water. Ensure all parts are dry before reassembling and using.
Operating Instructions
1. Using the Can Opener

- Position Can: Lift the lever. Place the can under the geared wheel so that the rim of the can is positioned between the geared wheel and the cutting blade.
- Engage Can: Push the lever down firmly until the blade punctures the can lid and the geared wheel engages with the can rim. The can opener will automatically start cutting.
- Hands-Free Operation: The can opener will hold the can and rotate it automatically until the lid is fully cut.
- Automatic Stop: Once the can is fully opened, the motor will stop automatically.
- Remove Can: Lift the lever to release the can. The magnetic lid holder will retain the lid, preventing it from falling into the can. Carefully remove the lid from the magnetic holder.
Note: For best results, ensure the can is placed securely and the lever is fully engaged.
2. Using the Knife Sharpener

- Locate Sharpener: The knife sharpener slot is located on the back of the unit.
- Insert Knife: Hold the knife with the blade facing down. Insert the knife blade into the sharpening slot, ensuring the blade is straight.
- Sharpen: Gently pull the knife towards you through the slot, applying light downward pressure. Repeat this motion 3-5 times, alternating sides if necessary, until the desired sharpness is achieved.
- Clean Blade: After sharpening, carefully wipe the knife blade with a damp cloth to remove any metal filings.
Caution: Always exercise extreme care when handling sharp objects. Keep fingers away from the sharpening area.
3. Using the Scissor Sharpener
- Locate Sharpener: The scissor sharpener slot is located on the back of the unit, adjacent to the knife sharpener.
- Insert Scissor Blade: Open the scissors and insert one blade into the sharpening slot.
- Sharpen: Gently pull the scissor blade towards you through the slot, applying light downward pressure. Repeat for the other blade. Repeat this motion 3-5 times per blade.
- Clean Blades: After sharpening, carefully wipe the scissor blades with a damp cloth to remove any metal filings.
Caution: Always exercise extreme care when handling sharp objects. Keep fingers away from the sharpening area.
4. Using the Bottle Opener
- Locate Bottle Opener: The bottle opener is integrated into the side of the unit.
- Position Bottle: Place the bottle cap under the metal lip of the bottle opener.
- Open Bottle: Apply firm upward pressure to the bottle, leveraging the opener to remove the cap.
Maintenance and Cleaning

- Unplug: Always unplug the can opener from the electrical outlet before cleaning.
- Removable Lever: The cutting lever assembly is removable for easy cleaning. To remove, lift the lever and pull it gently outwards.
- Clean Lever: Wash the removable lever with warm, soapy water. Rinse thoroughly and dry completely before reattaching.
- Clean Unit Body: Wipe the exterior of the can opener with a damp cloth. Do not use abrasive cleaners or immerse the main unit in water.
- Reassemble: Reattach the lever by aligning it with the slots and pushing it firmly into place until it clicks.
- Cord Storage: When not in use, the power cord can be neatly stored in the cord storage compartment at the back of the unit.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Can opener does not start. |
|
|
| Can does not rotate or stops mid-way. |
|
|
| Lid falls into the can. |
|
|
| Knives/scissors not sharpening effectively. |
|
|
Specifications
- Model Number: 024715-003-0000
- Brand: Starfrit
- Color: Red
- Material: Plastic, Stainless Steel
- Product Dimensions: 4.4"W x 8"H
- Item Weight: 1.95 Pounds
- Operation Mode: Automatic
- Wattage: 50 watts
- UPC: 069858247159
- Manufacture Year: 2019

Warranty and Support
For warranty information or technical support, please contact Starfrit customer service. Details can typically be found on the product packaging or the official Starfrit website.
Please have your model number (024715-003-0000) and UPC (069858247159) available when contacting support.





