1. Product Overview
The Steinel L 22 N (Model 065782) is an anthracite-colored outdoor wall light designed for durability and energy efficiency. It features an integrated twilight sensor that automatically switches the light on at dusk and off at dawn, providing convenient and inviting ambient lighting for your home's exterior.
This fixture is built with robust, impact-resistant materials (IK07) and is rated IP44 for protection against splashing water and solid objects larger than 1mm, making it suitable for various outdoor environments such as entrances, facades, gardens, terraces, or balconies.
Image 1.1: The Steinel L 22 N outdoor wall light providing ambient illumination.
2. Setup and Installation
Safety First: Electrical installation should only be performed by a qualified electrician in accordance with national wiring regulations and local safety standards. Always disconnect power at the main circuit breaker before beginning any installation work.
2.1. Package Contents
- Steinel L 22 N Wall Light
- Mounting Material (screws, wall plugs)
- Instruction Manual
- Note: Light bulb is not included.
2.2. Mounting the Fixture
- Choose a suitable mounting location on a wall, ensuring it is within reach of the electrical supply (220 - 240 V / 50 - 60 Hz).
- Mark the drilling points on the wall using the mounting plate as a template.
- Drill holes and insert the provided wall plugs.
- Secure the mounting plate to the wall using the screws.
2.3. Electrical Connection
- Connect the electrical wires from your mains supply to the terminal block inside the fixture. Ensure correct polarity (Live, Neutral, Earth).
- Carefully tuck the wires into the housing and attach the light fixture to the mounting plate.
2.4. Bulb Installation
- Unscrew the diffuser cover.
- Insert an E27 bulb into the socket. The fixture supports incandescent bulbs up to 60W or energy-saving/LED bulbs up to 20W.
- Securely reattach the diffuser cover.
Image 2.1: Product dimensions for installation planning.
3. Operating Instructions
The Steinel L 22 N features an integrated twilight sensor for automatic operation and an eco-mode for optimized energy consumption.
3.1. Automatic Twilight Function
The light is equipped with a twilight sensor that detects ambient light levels. It will automatically switch on when the surrounding light drops below a set threshold (adjustable between 2 - 50 lux) and switch off again when it becomes bright enough in the morning.
3.2. Adjusting Twilight Sensor and Eco-Mode
The light sensitivity and eco-mode settings are typically adjusted via two small screws located near the sensor on the fixture. These adjustments allow you to fine-tune when the light activates and how it behaves during the night.
- Twilight Sensor Adjustment: One screw controls the lux level (brightness threshold) at which the light turns on. Turn clockwise for higher sensitivity (turns on earlier in dim light) or counter-clockwise for lower sensitivity (turns on later in darker conditions).
- Eco-Mode Adjustment: The second screw controls the eco-mode functionality. This mode is designed to save energy by potentially turning the light off for a period during the night or adjusting its behavior. Refer to the detailed diagram below for visual guidance. Adjusting this setting requires careful observation to achieve desired results.
Image 3.1: Eco-mode operation diagram.
Important Note: The adjustment screws are delicate. Use appropriate tools and apply minimal force to avoid damage. Experiment with settings over a few nights to find the optimal configuration for your specific environment.
Image 3.2: Overview of product features including twilight sensor and eco-mode.
For an augmented reality view of the product, scan the QR code in the image above or visit: Steinel AR View
4. Maintenance
The Steinel L 22 N is designed for long-lasting performance with minimal maintenance.
4.1. Cleaning
- Ensure the power supply to the light is disconnected before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or plastic components.
- Regularly clean the twilight sensor lens to ensure accurate light detection.
4.2. Material Durability
The fixture is constructed from robust, UV-resistant plastic and stainless steel finishes, providing IK07 impact resistance. This ensures durability against environmental factors and minor impacts.
5. Troubleshooting
If you encounter issues with your Steinel L 22 N light, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at dusk. | No power supply; faulty bulb; twilight sensor set too low (too dark); sensor obstructed. | Check circuit breaker. Replace bulb. Adjust twilight sensor sensitivity (increase lux setting). Clear any obstructions from the sensor. |
| Light stays on during the day. | Twilight sensor set too high (too bright); sensor obstructed or dirty. | Adjust twilight sensor sensitivity (decrease lux setting). Clean the sensor lens. Ensure no artificial light source is directly hitting the sensor during the day. |
| Light turns on/off erratically or cycles. | Twilight sensor interference; eco-mode misconfiguration; faulty sensor. | Ensure no other light sources (e.g., car headlights, other outdoor lights) are interfering with the sensor. Re-adjust eco-mode settings. If problem persists, contact support. |
| Light turns off in the middle of the night. | Eco-mode is activated and set to turn off after a certain period. | Adjust the eco-mode setting to disable this feature or extend the illumination period. Refer to section 3.2. |
If these solutions do not resolve the issue, please contact Steinel customer support.
6. Technical Specifications
- Model Number: 065782
- Dimensions (LxWxH): 81 x 162 x 280 mm
- Weight: 0.99 kg
- Power Connection: 220 - 240 V / 50 - 60 Hz
- IP Rating: IP44 (Protection against splashing water and solid objects > 1mm)
- Impact Resistance: IK07
- Bulb Socket: E27
- Max. Incandescent Bulb Wattage: 60 W
- Max. LED/Energy-Saving Bulb Wattage: 20 W
- Twilight Sensor Range: 2 - 50 lux
- Materials: Stainless steel, UV-resistant Plastic
- Color: Anthracite
7. Warranty Information
For detailed warranty terms and conditions, please refer to the official Steinel website or the warranty documentation provided with your purchase. Warranty periods and coverage may vary by region and product type.
8. Customer Support
Should you require technical assistance, have questions about installation, or need to report a fault, please contact Steinel customer service.
You can find contact information and additional resources on the official Steinel website:
