Yaheetech Set of 2 Bedside Cabinets

Introduction

Thank you for choosing the Yaheetech Set of 2 Bedside Cabinets. This manual provides essential information for the safe assembly, proper use, and maintenance of your new furniture. Please read these instructions carefully before beginning assembly and retain them for future reference.

These bedside cabinets are designed to offer efficient storage and a simple aesthetic, suitable for various rooms. Each cabinet features two drawers and an open storage compartment.

Safety Information

• Always assemble the product on a clean, soft surface to prevent scratches.
• Ensure all parts are present and undamaged before assembly. Do not use damaged parts.
• Tighten all screws and fasteners securely, but do not overtighten to avoid stripping threads or cracking wood.
• Keep small parts and packaging materials away from children and pets to prevent choking hazards.
• Do not stand or climb on the cabinet.
• Distribute weight evenly across shelves and drawers. Do not exceed the maximum load capacities specified in this manual.
• Attach the anti-tipping device to a wall as instructed to prevent accidental tipping, especially in households with children.

Package Contents

Before assembly, verify that all components listed below are included in your package:

• 2 x Bedside Cabinets (unassembled components)
• 1 x Assembly Instructions Manual
• All necessary hardware (screws, dowels, metal knobs, linear guides, anti-tipping device)
• Basic assembly tools (e.g., Allen wrench, if required)

Setup and Assembly

Assembly typically takes a few minutes per cabinet. Follow the detailed, illustrated instructions provided in the separate assembly manual included in your package. The general steps are outlined below:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out and compare them against the parts list in your assembly manual to ensure everything is present.
2. Assemble the Main Frame: Connect the side panels, top panel, and base panel using the provided hardware. Ensure all connections are secure.
3. Install Drawer Slides: Attach the linear guides to the inner sides of the cabinet frame according to the instructions.
4. Assemble Drawers: Construct the two drawers by attaching the front, back, side panels, and bottom. Install the metal knobs onto the drawer fronts.
5. Insert Drawers: Carefully slide the assembled drawers onto the installed linear guides. Test for smooth operation.
6. Attach Anti-Tipping Device: Secure the anti-tipping device to the back of the cabinet and then to a wall stud using appropriate hardware. This step is crucial for safety.

Refer to the specific assembly manual for detailed diagrams and step-by-step instructions.

Figure 1: Dimensions and Load Capacities. This image illustrates the overall dimensions of the bedside cabinet (40 cm width, 35 cm depth, 60 cm height) and the maximum weight capacities for the tabletop (35 kg), open storage compartment (10 kg), and each drawer (6 kg).

Figure 2: Construction Details. This image shows key components such as the E1 class MDF wood panels, the metal knobs on the drawers, and the metal linear guides that ensure smooth drawer movement.

Figure 3: Anti-Tipping Mechanism. This image demonstrates how to attach the anti-tipping device to the wall to prevent the cabinet from tipping over, enhancing safety, especially for households with children.

Operating Instructions

The Yaheetech Bedside Cabinet is designed for straightforward use:

• Drawers: Gently pull the metal knobs to open the drawers. Push them back in to close. Avoid forcing the drawers, especially if they feel stiff.
• Open Storage Compartment: Use the open shelf for items you need easy access to, such as books, decorative items, or a small lamp.
• Tabletop: The top surface can be used for various items like a clock, phone, or a glass of water. Ensure the weight does not exceed 35 kg.

Figure 4: Bedside Cabinet in Bedroom. This image shows the bedside cabinet in a typical bedroom setting, demonstrating its use next to a bed with items placed on the open shelf and tabletop.

Figure 5: Bedside Cabinet in Living Room. This image illustrates the versatility of the cabinet, showing it used as a side table next to a sofa in a living room, holding a vase and books.

Maintenance and Care

To ensure the longevity and appearance of your bedside cabinets, follow these care guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. The MDF panels are water-repellent and easy to clean. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Spills: Promptly wipe up any spills to prevent moisture damage, despite the water-repellent properties.
• Inspection: Periodically check all fasteners and tighten them if necessary to maintain stability.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration.
• Humidity: Maintain a stable room temperature and humidity level to prevent warping or cracking of the wood panels.

Figure 6: Material Properties. This image highlights the key characteristics of the materials used, including E1 emission class, water-repellent surface, ease of cleaning, and overall durability.

Troubleshooting

If you encounter any issues with your bedside cabinets, refer to the following common problems and solutions:

• Cabinet is Wobbly:
  • Ensure all screws and fasteners are securely tightened.
  • Verify that the cabinet is placed on a level surface. Adjust if necessary.
• Drawers Do Not Slide Smoothly:
  • Check that the drawer slides are correctly installed and aligned.
  • Ensure no foreign objects are obstructing the slides.
  • Confirm that the drawer is assembled squarely.
• Missing Parts:
  • Double-check the packaging and all contents against the parts list in the assembly manual.
  • If parts are genuinely missing, contact customer support with your product model and a description of the missing items.

Specifications

Warranty and Support

For information regarding warranty coverage, returns, or technical support, please refer to the purchase documentation or contact the retailer where you purchased this product. Keep your proof of purchase for any warranty claims.

If you require assistance with assembly or have questions not covered in this manual, please reach out to Yaheetech customer service through the contact information provided on our official website or your purchase platform.