GIM ATX Mid Tower PC Case User Manual

1. Introduction

This manual provides comprehensive instructions for the GIM ATX Mid Tower PC Case. It covers product features, specifications, installation procedures, operation guidelines, maintenance tips, and troubleshooting information to ensure optimal performance and longevity of your computer case.

Please read this manual thoroughly before beginning installation or operation.

2. Product Overview

The GIM ATX Mid Tower PC Case is designed for gaming enthusiasts, offering a spacious interior, excellent cooling capabilities, and a visually appealing design with tempered glass panels and an RGB strip.

2.1 Key Features

• 270° Full View Tempered Glass: Two 4mm-thick tempered glass side panels provide a panoramic view of internal components.
• Extensive Cooling Support: Accommodates up to ten 120mm fans and supports liquid cooling radiators up to 360mm in designated areas (top, side, bottom).
• Broad Motherboard Compatibility: Supports ATX, Micro-ATX, and Mini-ITX motherboards.
• Ample Storage Options: Provides space for two 2.5" SSDs and two 3.5" HDDs.
• Efficient Cable Management: Features a dedicated space behind the motherboard tray for organized cable routing.
• Integrated RGB Strip: A front panel RGB strip with customizable lighting via a dedicated LED button.
• Convenient I/O Panel: Top-mounted ports include 1x USB 3.0, 2x USB 2.0, HD Audio (headphone/microphone), Power, Reset, and LED control buttons.
• Dust Filtration: Equipped with a top magnetic dust filter for easy cleaning and system protection.

2.2 Case Components

Figure 2.2.1: Front view of the GIM ATX Mid Tower PC Case, showcasing its spacious interior and tempered glass panels. This image displays the case without any internal components installed, highlighting the mounting points for motherboards, fans, and storage drives.

Figure 2.2.2: Internal layout diagram illustrating compatibility for various motherboard sizes (Mini ITX, Micro ATX, ATX), maximum GPU length (400mm), maximum CPU cooler height (160mm), and fan/liquid cooler placements (120mm fan x3/360 liquid cooler support on top, side, and bottom; 120mm fan x1 on rear).

Figure 2.2.3: Internal layout diagram detailing the mounting positions for storage drives (2x 2.5" SSD, 2x 3.5" HDD) and the ATX Power Supply Unit (PSU) with a maximum length of 200mm.

3. Specifications

Figure 3.1: Dimensional overview of the GIM ATX Mid Tower PC Case, indicating its length (16.14 inches), width (11 inches), and height (16.8 inches).

4. Setup and Installation

Before starting, ensure you have all necessary components and tools. It is recommended to work on a clean, static-free surface.

4.1 Preparing the Case

1. Unpack the Case: Carefully remove the PC case from its packaging.
2. Remove Side Panels: The case features two 4mm-thick tempered glass side panels. Gently unscrew the thumb screws securing the panels and remove them to access the interior.
3. Identify Components: Familiarize yourself with the internal layout, including motherboard standoffs, drive bays, and fan mounting points.

Figure 4.1.1: Illustration of the removable tempered glass panels, which can be detached for easier access during component installation.

4.2 Component Installation Order

Follow this general order for installing components:

1. Motherboard: Install the motherboard (ATX, Micro-ATX, or Mini-ITX) onto the pre-installed standoffs. Secure with screws.
2. CPU and CPU Cooler: Install your CPU and CPU cooler (air or liquid) onto the motherboard before or after installing the motherboard into the case, depending on cooler size. Max CPU cooler height is 160mm.
3. Memory (RAM): Install RAM modules into the motherboard slots.
4. Storage Drives: Install 2.5" SSDs and 3.5" HDDs into their designated bays.
5. Power Supply Unit (PSU): Install the ATX PSU in the bottom mount. Ensure its length does not exceed 200mm.
6. Graphics Card (GPU): Install the graphics card into the appropriate PCIe slot. Max GPU length is 400mm.
7. Case Fans/Radiators: Install up to ten 120mm fans or liquid cooling radiators (up to 360mm) in the top, side, or bottom positions as desired for optimal airflow.

4.3 Cable Management

Utilize the space behind the motherboard tray for routing and organizing cables. This improves airflow and maintains a clean aesthetic.

• Route power cables and data cables through the cutouts to the back of the case.
• Use cable ties or Velcro straps to bundle cables neatly.
• Connect front panel I/O cables (USB 3.0, USB 2.0, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. The USB cable is shielded for interference-free data transmission.

5. Operation

5.1 Powering On

Once all components are installed and cables are connected, replace the tempered glass side panels. Connect your power cable to the PSU and press the power button on the top I/O panel to start your system.

5.2 Front Panel I/O

Figure 5.2.1: Detailed view of the top I/O panel, indicating the locations of the USB 3.0 port, USB 2.0 ports, earphone jack, microphone jack, Reset/LED button, and Power button.

• USB 3.0 Port (x1): For high-speed data transfer.
• USB 2.0 Ports (x2): For connecting peripherals.
• HD Audio: Separate ports for headphones and microphone.
• Power Button: To turn the system on or off.
• Reset/LED Button: Short press for system reset. Long press (or multiple presses) to cycle through RGB lighting modes for the front panel strip.

5.3 RGB Lighting Control

The front panel features an integrated RGB LED strip. Use the dedicated LED button on the top I/O panel to change lighting colors and effects. Connect the RGB strip's power supply and the 'LED' button cable internally as shown in Figure 5.3.1.

Figure 5.3.1: Detail of the front ARGB LED light strip and its internal connection point, illustrating how to connect the power supply and the 'LED' button for control.

6. Maintenance

Regular maintenance helps ensure optimal performance and extends the lifespan of your PC components.

• Dust Filter Cleaning: The case is equipped with a top magnetic dust filter. Regularly remove and clean this filter to prevent dust buildup inside the case, which can impede airflow and cooling performance.
• Interior Cleaning: Periodically open the side panels and use compressed air to remove dust from internal components, especially fans, heatsinks, and radiators.
• Exterior Cleaning: Wipe the exterior surfaces and tempered glass panels with a soft, damp cloth. Avoid abrasive cleaners.

Figure 6.1: Exploded view demonstrating the case's design for four-sided circulating heat dissipation, emphasizing the importance of clear airflow paths and dust filter maintenance.

7. Troubleshooting

This section addresses common issues you might encounter.

• System Does Not Power On:
  • Ensure the power cable is securely connected to the PSU and the wall outlet.
  • Check that the PSU switch is in the 'ON' position.
  • Verify all internal power connections (24-pin ATX, 8-pin CPU, GPU power) are correctly seated.
  • Confirm the front panel power button cable is correctly connected to the motherboard header.
• No Display Output:
  • Ensure your monitor is connected to the graphics card (GPU) output, not the motherboard's integrated graphics ports (unless using integrated graphics).
  • Reseat the graphics card and RAM modules.
• RGB Strip Not Lighting Up:
  • Check the internal connection of the RGB strip's power cable.
  • Ensure the LED button cable from the front panel is correctly connected.
  • Press the LED button to cycle through modes.
• Poor Airflow/Overheating:
  • Clean the dust filter and internal components.
  • Verify that all installed fans are spinning correctly and oriented for optimal airflow (intake/exhaust).
  • Ensure proper cable management to avoid obstructing airflow.

If you encounter issues not covered here, please refer to the Warranty and Support section for assistance.

8. Warranty and Support

GIM is committed to providing quality products and customer satisfaction.

• Warranty: For any quality issues with your GIM ATX Mid Tower PC Case, please contact customer support.
• Customer Service: If you require assistance or have questions regarding your product, please contact GIM Electronic, the seller. They are available to help resolve any concerns.

For the most up-to-date warranty information and support contact details, please refer to the official GIM website or your purchase documentation.