Okin Wireless Remote Replacement Hand Control User Manual

1. Product Overview

This Okin Wireless Remote Control is designed as a replacement hand control for electric adjustable beds. It is specifically compatible with the RF.27.19.33 model and works seamlessly with various OKIN control boxes, including CB.13, CB.15, CB.23, CB.11, and CB.12.20 series. This remote provides intuitive control over your adjustable bed's functions, including position adjustments, massage features, and under-bed lighting.

Figure 1.1: Okin RF.27.19.33 Wireless Remote Control (Front)

Figure 1.2: Okin RF.27.19.33 Wireless Remote Control (Back)

Figure 1.3: Remote Control Label Detail (RF.27.19.33)

2. Setup and Pairing

2.1 Battery Installation

The remote control requires 2 AAA batteries (not included). To install:

1. Locate the battery compartment on the back of the remote control.
2. Slide open the battery cover.
3. Insert 2 AAA batteries, ensuring correct polarity (+/-).
4. Close the battery cover securely.

2.2 Pairing Process

Before using the remote, it must be paired with your adjustable bed's control box. Ensure your bed is plugged into a power outlet.

1. Step 1: Prepare the Control Box

   Locate the control box under your bed base. Double-click the code pairing button on the control box. The indicator light on the control box will turn blue, and the under-bed light (if present) will flash. This indicates the control box is in matching code mode.

   

   Figure 2.1: Control Box Pairing Button

2. Step 2: Pair the Remote Control

   Press and hold the PAIR button on the remote control. The backlight of the remote will flash, indicating it is in matching mode. Continue to hold the button until the backlight stops flashing and remains constantly on (or the under-bed light stops flashing and goes out). Keep the remote within 1 meter of the control box during this process.

   

   Figure 2.2: Remote Control PAIR Button

NOTE:

• If code matching is not completed within the allotted time, please repeat the above actions until successful.
• Upon successful pairing, the control box LED will turn green. If it turns off, pairing failed, and you should retry.
• Avoid electronic interference during the pairing process.

3. Operating Instructions

The Okin wireless remote control features an intuitive layout for easy operation of your adjustable bed. Key functions include:

• Position Adjustments: Independent control for head and foot sections (up/down arrows).
• Memory Positions: Buttons for pre-set positions (e.g., ZG for Zero Gravity, TV for TV position, M for memory).
• Massage Functions: Dedicated buttons for massage intensity and duration (10min, 20min, 30min).
• Under-Bed Light: Button to control the under-bed lighting.
• On/Off: Power button for the remote.
• Timer: For setting sleep or massage timers.
• Mode: To cycle through different massage modes or other settings.

The ergonomic design ensures comfortable handling, and the wireless operation eliminates tangled wires.

4. Maintenance

• Battery Care: Remove batteries from the remote control if it will not be used for an extended period to prevent leakage.
• Cleaning: Clean the remote control with a soft, damp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the surface and internal components.
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Durability: The remote is crafted from high-strength ABS plastic and is resistant to drops (tested up to 1.5m). However, avoid excessive force or impact.

5. Troubleshooting

If problems persist after following these steps, please contact Okin customer support.

6. Specifications

• Model Number: RF.27.19.33
• Compatibility: Okin control boxes (CB.13, CB.15, CB.23, CB.11, CB.12.20 series), Lucid L600 adjustable beds. Not compatible with other brands or non-specified models.
• Power Source: 2 x AAA batteries (not included)
• Material: High-strength ABS plastic
• Color: White
• Item Weight: Approximately 3.2 ounces (90.7 grams)
• Product Dimensions: Approximately 7 x 7 x 3 inches (17.8 x 17.8 x 7.6 cm)
• Max Number of Supported Devices: 1
• Special Feature: Ergonomic design
• Country of Origin: China

7. Warranty and Support

7.1 Warranty Information

Specific warranty details for this replacement remote control are typically provided at the point of purchase or with the original product documentation. Please refer to your purchase receipt or contact the seller for warranty terms and conditions.

7.2 Customer Support

For any unresolved issues, technical assistance, or inquiries regarding your Okin Wireless Remote Control, please contact Okin customer support. You can often find contact information on the official Okin website or through the retailer where you purchased the product.

Online Resources: For additional information and support, you may visit the official Okin store on Amazon: Okin Store