Introduction
This manual provides instructions for the assembly, operation, and maintenance of your SHA CERLIN Queen Size Metal Bed Frame with Leather Upholstered Headboard. Please read these instructions carefully before assembly and retain for future reference.
Safety Information
- Ensure the bed frame is assembled correctly to prevent instability or collapse.
- Do not exceed the maximum weight recommendation of 800 pounds.
- Keep small parts away from children during assembly.
- Periodically check all connections to ensure they remain tight.
Parts List
Before beginning assembly, verify that all components listed below are present and undamaged.
- Headboard
- Slats (Metal)
- Bed Frame Components (Metal)
- Assembly Hardware (Bolts, Washers, Allen Wrench, etc.)
Setup and Assembly
Assembly is designed to be straightforward and typically takes approximately 30 minutes. Two people are recommended for easier assembly.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble Headboard: Attach the headboard sections if they are separate, ensuring all connections are secure. The headboard features a geometric litchi grain leather design.
- Construct Frame: Connect the side rails and footboard to the headboard using the provided hardware. Ensure all bolts are finger-tightened initially.
- Install Slats: Place the metal slats into the designated slots on the bed frame. The slats are designed to click into place for secure fitting. The EVA material on the frame helps reduce noise.
- Final Tightening: Once all parts are in place, fully tighten all bolts with the provided Allen wrench. Do not overtighten.
- Attach Plastic Pads: Ensure the plastic pads are attached to the bottom of the bed feet to protect your floor.
Image: Illustration of metal slats clicking into the bed frame for easy assembly.
Image: Detail of the sturdy metal slats and EVA sponge for noise reduction.
Video: Official SHA CERLIN video demonstrating the assembly and features of the metal bed frame with upholstered headboard.
Operating Instructions
- Mattress Placement: This bed frame is designed for use without a box spring. Place your mattress directly onto the metal slats.
- Mattress Compatibility: A mattress or mattress with a box spring combination is recommended for you to choose from to suit your sleeping habits. The embedded design prevents the mattress from slipping out. Recommended mattress height is 10-12 inches.
- Under-Bed Storage: The platform bed offers approximately 12.4 inches of clearance, providing ample space for storage. This space is also accessible for sweeping machines.
Image: Recommended mattress height of 10-12 inches for optimal fit.
Image: Illustration of 12.4 inches of under-bed storage space.
Maintenance
- Cleaning the Headboard: The litchi grain leather headboard is easy to clean and maintain. Wipe with a damp cloth to remove dust and spills. Avoid harsh chemicals.
- Frame Care: The metal frame can be wiped clean with a soft, dry cloth. Avoid abrasive cleaners.
- Noise Reduction: The EVA material between the slats and frame is designed to reduce noise. If any squeaking occurs, check all connections and tighten bolts as necessary.
Troubleshooting
- Bed Frame is Wobbly: Ensure all bolts are securely tightened. Check that the bed frame is on a level surface.
- Squeaking Noises: Verify that all slats are properly seated and secured. Tighten any loose bolts on the frame. The EVA material is designed to minimize noise.
- Mattress Sliding: The embedded design of the frame helps prevent mattress sliding. Ensure your mattress fits within the frame dimensions.
Specifications
| Feature | Detail |
|---|---|
| Size | Queen |
| Material | Metal frame, Leather upholstered headboard |
| Product Dimensions (L x W x H) | 82.3" x 62.2" x 41.8" |
| Under-Bed Clearance | 12.4 inches |
| Weight Capacity | 800 lbs |
| Box Spring Required | No |
| Model Number | AK-6857Q |
| UPC | 749655408983 |
Image: Detailed product dimensions and specifications.
Warranty and Support
This product is manufactured by SHA CERLIN. For support or inquiries, please contact the manufacturer directly or refer to the retailer's return policy.
- Return Policy: This product is eligible for a 90-day easy return policy through Amazon.
- Manufacturer: SHA CERLIN
Additional Information
The bed frame features a comfortable headboard for back relaxation, making it suitable for reading or watching in bed.
Image: The upholstered headboard provides comfortable back support.
