Nokia Go Earbuds+ True Wireless Earbuds Instruction Manual

Introduction

The Nokia Go Earbuds+ are true wireless in-ear headphones designed for a seamless audio experience. Featuring Bluetooth 5.0 connectivity, 13mm dynamic drivers for enhanced sound, and IPX4 water resistance, these earbuds are suitable for various activities. The compact charging case provides extended battery life, and intuitive touch controls allow for easy management of music and calls.

What's in the Box

Upon unboxing your Nokia Go Earbuds+, please ensure all components are present:

• Left and Right Earbuds
• Charging Case
• USB-C Charging Cable
• Multiple Pairs of Eartips (S, M, L)
• Quick Start Guide

Image: The Nokia Go Earbuds+ package contents, showing the earbuds, charging case, USB-C cable, and various eartip sizes.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the Nokia Go Earbuds+ and their charging case. Connect the provided USB-C cable to the charging port on the case and to a compatible USB power source. The LED indicator on the case will show the charging status. Once fully charged, the indicator will change or turn off depending on the model.

Image: Nokia Go Earbuds+ placed inside their open charging case, ready for charging or pairing.

2. Bluetooth Pairing

1. Ensure the earbuds are charged.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing LED on the earbuds.
3. On your device (smartphone, tablet, etc.), go to Bluetooth settings and enable Bluetooth.
4. Select "Nokia Go Earbuds+" from the list of available devices.
5. Once connected, the earbuds' LED indicators will stop flashing or show a solid light, and you will hear an audio confirmation.

Image: The Nokia Go Earbuds+ removed from their charging case, ready for use or pairing.

Operating Instructions

Touch Controls

The Nokia Go Earbuds+ feature intuitive touch controls on each earbud for managing audio playback and calls:

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Answer/End Call: Single tap on either earbud.
• Reject Call: Press and hold either earbud for 2 seconds.
• Activate Voice Assistant: Triple tap on either earbud.

Mono Earbud Use

You can use either the left or right earbud independently as a mono Bluetooth headset. Simply remove one earbud from the case, and it will automatically connect to your paired device. The other earbud can remain in the charging case.

Image: A single Nokia Go Earbud+ highlighted, illustrating its capability for independent mono use.

Maintenance

Cleaning

To maintain optimal performance and hygiene, regularly clean your earbuds and charging case:

• Wipe the earbuds and charging case with a soft, dry, lint-free cloth.
• Remove any earwax or debris from the eartips and speaker grilles using a small, soft brush or cotton swab.
• Ensure charging contacts on both earbuds and case are clean and dry.

Water Resistance (IPX4)

The Nokia Go Earbuds+ are rated IPX4, meaning they are resistant to splashing water from any direction. This makes them suitable for workouts and light rain. However, they are not designed for submersion in water or exposure to pressurized water jets. Always ensure the earbuds are dry before placing them back into the charging case to prevent damage.

Image: Nokia Go Earbuds+ and their charging case, illustrating their IPX4 water and sweat resistance.

Troubleshooting

If you encounter issues with your Nokia Go Earbuds+, refer to the following common solutions:

• Earbuds not charging: Ensure the protective film is removed from the charging contacts on the earbuds. Verify the charging cable is securely connected and the power source is active. Clean the charging contacts on both the earbuds and the case.
• Earbuds not pairing: Make sure Bluetooth is enabled on your device and the earbuds are in pairing mode (open case). Try forgetting the device in your Bluetooth settings and re-pairing.
• No sound or low volume: Check the volume levels on both your device and the earbuds. Ensure the earbuds are properly seated in your ears.
• Intermittent connection: Move closer to your paired device and away from potential interference sources (e.g., Wi-Fi routers, other Bluetooth devices).
• Earbuds falling out: Experiment with the different sizes of eartips provided to find the most secure and comfortable fit for your ears.

If problems persist, consult the official Nokia support website or contact customer service for further assistance.

Specifications

Image: Detailed dimensions of the Nokia Go Earbuds+ and their charging case.

Warranty and Support

For warranty information, product registration, or technical support, please refer to the official Nokia website or the documentation included with your product. You may also contact Nokia customer service directly for assistance with any product-related inquiries or issues.