Introduction
Thank you for choosing the Solac CE4504 Pump Espresso & Cappuccino Coffee Machine. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and keep them for future reference.
Important Safety Instructions
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:
- Read all instructions before operating the appliance.
- Do not touch hot surfaces. Use handles or knobs.
- To protect against fire, electric shock, and injury to persons, do not immerse cord, plugs, or appliance in water or other liquid.
- Close supervision is necessary when any appliance is used by or near children.
- Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance.
- Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
- The use of accessory attachments not recommended by the appliance manufacturer may result in fire, electric shock, or injury to persons.
- Do not use outdoors.
- Do not let cord hang over edge of table or counter, or touch hot surfaces.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to "off", then remove plug from wall outlet.
- Do not use appliance for other than intended use.
- Scalding may occur if the water tank lid is removed during the brewing cycle.
Product Overview
Familiarize yourself with the components of your Solac CE4504 coffee machine before operation.
Figure 1: Front view of the Solac CE4504 espresso machine, showcasing the main body, control dial, portafilter, and drip tray.
Figure 2: Side view of the Solac CE4504, highlighting the removable water tank on the right side of the machine.
Figure 3: Close-up of the front control panel, showing the Solac logo, 20 bar pressure indicator, and the main control dial with icons for espresso and steam functions.
Figure 4: Detailed view of the portafilter attached to the machine, along with the control dial set to an operational position.
Figure 5: Included accessories: two different sized filter baskets for the portafilter and a coffee measuring scoop.
Components List:
- Main Unit: Houses the pump, heating element, and control panel.
- Water Tank: Removable transparent tank for water supply.
- Control Dial: Selects functions (Off, Espresso, Steam).
- Portafilter: Holds the ground coffee for brewing.
- Filter Baskets: Different sizes for single or double espresso shots.
- Measuring Scoop: For accurate coffee dosing.
- Drip Tray: Collects excess liquid and removable for cleaning.
- Steam Wand: For frothing milk.
Setup
- Unpacking: Carefully remove all packaging materials and check for any damage. Ensure all accessories are present.
- Placement: Place the machine on a stable, flat, heat-resistant surface, away from water sources and heat.
- Clean Components: Wash the water tank, portafilter, filter baskets, and drip tray with warm soapy water, then rinse thoroughly and dry.
- Fill Water Tank: Remove the water tank, fill it with fresh, cold water up to the MAX level, and place it back securely.
- First Use / Priming:
- Plug the machine into a grounded electrical outlet.
- Place a large cup under the portafilter (without coffee).
- Turn the control dial to the espresso symbol (coffee cup icon). Water will start to flow.
- Let approximately 200ml of water run through. This primes the pump and cleans the internal system.
- Turn the control dial to the "Off" position.
Operating Instructions
Making Espresso:
- Prepare Portafilter: Insert the desired filter basket into the portafilter. Add finely ground espresso coffee using the measuring scoop. Level the coffee and tamp it firmly.
- Attach Portafilter: Align the portafilter with the group head on the machine and twist it firmly to the right until it is securely locked.
- Place Cup: Place one or two espresso cups on the drip tray directly under the portafilter spouts.
- Brew Espresso: Ensure the water tank is filled. Turn the control dial to the espresso symbol (coffee cup icon). The machine will start brewing.
- Stop Brewing: Once the desired amount of espresso is dispensed (typically 25-30ml per shot), turn the control dial back to the "Off" position to stop the flow.
- Remove Portafilter: Carefully remove the portafilter by twisting it to the left. Discard the used coffee grounds.
Frothing Milk for Cappuccino/Latte:
- Prepare Milk: Fill a stainless steel frothing pitcher with cold milk (dairy or non-dairy) to just below the spout.
- Activate Steam: Turn the control dial to the steam symbol (steam icon). Wait for the steam indicator light to illuminate, indicating the machine has reached steaming temperature.
- Purge Steam Wand: Position the steam wand over the drip tray and briefly open the steam valve to release any condensed water. Close the valve.
- Froth Milk: Immerse the tip of the steam wand just below the surface of the milk. Open the steam valve. Move the pitcher up and down gently to create foam.
- Heat Milk: Once desired foam is achieved, immerse the wand deeper into the milk to heat it to the desired temperature (around 60-70°C).
- Stop Steaming: Close the steam valve and turn the control dial back to the "Off" position.
- Clean Steam Wand: Immediately wipe the steam wand with a damp cloth to prevent milk residue from drying. Briefly open the steam valve again to clear any internal milk.
Cleaning and Maintenance
Regular cleaning ensures optimal performance and extends the life of your coffee machine.
- Daily Cleaning:
- Empty and rinse the drip tray and water tank.
- Clean the portafilter and filter basket after each use.
- Wipe down the exterior of the machine with a damp cloth.
- Clean the steam wand immediately after frothing milk.
- Descaling:
Depending on water hardness and usage, descaling should be performed every 2-3 months. Use a commercial descaling solution suitable for coffee machines and follow the manufacturer's instructions. Always rinse the machine thoroughly with several tanks of fresh water after descaling.
- Filter Basket Cleaning: Periodically soak the filter baskets in a coffee machine cleaner to remove oil buildup.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No coffee dispenses. |
|
|
| Coffee brews too slowly or drips. |
|
|
| Coffee brews too quickly. |
|
|
| Steam wand not producing steam. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Solac |
| Model Number | CE4504 |
| Color | Blue |
| Power / Wattage | 1050 watts |
| Material | Stainless Steel |
| Item Weight | 3.45 Kilograms |
| Coffee Maker Type | Espresso Machine |
| Operation Mode | Fully Automatic |
| Special Features | Programmable, Removable Tank, Thermal, Timer, Water Filter |
| Included Components | Filter |
| Package Dimensions | 38.2 x 27.8 x 18.2 cm |
Warranty and Support
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including the warranty period and how to make a claim. For technical support, spare parts, or service inquiries, please contact Solac customer service through their official website or the contact information provided in your product packaging.
Keep your proof of purchase (receipt or invoice) as it will be required for any warranty claims.
