1. Product Overview
The Avenli High Raised Air Bed is designed to provide a comfortable and convenient sleeping solution for both home and travel. This inflatable double air bed features a built-in electric pump for quick inflation and deflation, and its robust construction ensures durability and stability.
Key Features:
- High raised inflatable double air bed with built-in electric pump.
- Dimensions: 195 cm × 96 cm × 46 cm, suitable for one or two people.
- Advanced 3-layer cushioning technology for superior stretch resistance.
- Constructed from dense polyester fibers, offering a flatter and more comfortable surface than traditional PVC beds.
- Enhanced durability and stretch resistance, reducing internal air loss by 20% compared to traditional PVC beds, maintaining stability longer.
- Includes a carry bag for easy transport and storage, and a repair patch.
Image: The Avenli High Raised Inflatable Air Bed, showcasing its elevated design and flocked sleeping surface.
2. Safety Information
Please read and understand all safety instructions before using the air bed. Failure to follow these instructions may result in injury or damage to the product.
- Indoor Use Only: This air bed is designed for indoor use. Do not use outdoors.
- Avoid Sharp Objects: Keep the air bed away from sharp objects, heat sources, and open flames.
- Supervise Children: Children should be supervised at all times when near the air bed.
- Do Not Overinflate: Overinflation can cause the air bed to burst, leading to injury. Inflate until firm, but not rigid.
- Weight Limit: Do not exceed the recommended weight capacity (refer to specifications).
- Electrical Safety: Ensure the power outlet for the built-in pump is easily accessible and in good condition. Do not operate the pump with wet hands or in wet conditions.
- Stable Surface: Place the air bed on a flat, level, and clear surface to prevent tipping or damage.
3. Setup and Inflation
Setting up your Avenli air bed is quick and easy thanks to the integrated electric pump.
- Unpack: Remove the air bed from its carry bag and unroll it on a clean, flat surface. Ensure there are no sharp objects underneath or around the bed.
- Locate Pump: Find the built-in electric pump on the side of the air bed.
- Plug In: Plug the pump's power cord into a suitable electrical outlet.
- Inflate: Turn the pump switch to the "Inflate" position. The bed will begin to inflate. Allow it to inflate until it reaches your desired firmness. The pump allows you to adjust the firmness to your preference.
- Seal Valve: Once inflated, turn the pump switch to the "Off" position and unplug the power cord. Ensure the valve cap is securely closed to prevent air leakage.
Image: The product packaging, showing the Avenli air bed and its key features, including the built-in electric pump.
4. Operating the Air Bed
The Avenli air bed is designed for simple operation.
- Adjusting Firmness: You can adjust the firmness of the air bed by briefly turning the pump on to inflate or deflate slightly until you achieve your preferred comfort level.
- Deflation: To deflate the air bed, plug in the pump and turn the switch to the "Deflate" position. The air will be quickly removed. Once deflated, fold the bed neatly for storage.
Image: A visual representation of the Avenli air bed's dimensions (195cm length, 96cm width, 46cm height).
5. Maintenance and Care
Proper care will extend the life of your Avenli air bed.
- Cleaning: Wipe the air bed with a damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the bed is completely dry before storing.
- Storage: After deflating, fold the air bed neatly and place it in the provided carry bag. Store in a cool, dry place away from direct sunlight and extreme temperatures.
- Repair Patch: A repair patch is included for minor punctures. Clean the damaged area, apply the patch firmly, and allow sufficient time for it to bond before re-inflating.
Image: The black carry bag with the Avenli logo, designed for convenient storage and transport of the air bed.
6. Troubleshooting
If you encounter issues with your air bed, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Air bed loses air quickly. |
|
|
| Pump not working. |
|
|
| Bed feels too soft/firm. | Inflation level not adjusted to preference. | Use the built-in pump to add or release air until desired firmness is achieved. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Avenli |
| Model Number | 24017EU |
| Product Dimensions (L x W x H) | 195 cm x 96 cm x 46 cm |
| Item Weight | 5 kg |
| Size | Twin (Double) |
| Material | Polyester (flocked surface), I-beam vinyl construction |
| Special Features | Inflatable, Built-in Electric Pump |
| Included Components | Air bed, Built-in electric pump, Carry bag, Repair patch |
| Care Instructions | Wipe with a damp cloth |
| Assembly Required | No |
| Batteries Required | No |
Image: A graphic illustrating key features: quick setup with built-in pump, robust material (three-layer PVC), and water-repellent flocked surface.
8. Warranty and Support
For warranty information or technical support, please contact the manufacturer, Avenli, or your retailer directly. Keep your purchase receipt as proof of purchase.
For general inquiries or to report an issue, please refer to the contact information provided with your product packaging or visit the official Avenli website.
