AIRTOK AP1002-RF

AIRTOK Air Purifier AP1002 Replacement Filter Instruction Manual

Model: AP1002-RF | Brand: AIRTOK

Introduction

This instruction manual provides essential information for the proper installation, operation, and maintenance of your AIRTOK Air Purifier AP1002 Replacement Filter (Model AP1002-RF). This H13 True HEPA filter is designed to maintain the optimal performance of your AIRTOK AP1002 air purifier, ensuring clean and healthy air in your environment.

Key Features

  • Authentic AIRTOK Filters: Designed specifically for the AIRTOK AP1002 air purifier (AP1002-RF) to ensure consistent, reliable performance and prevent damage to the appliance.
  • H13 True HEPA Technology: Capable of removing up to 99.97% of airborne particles as small as 0.1 microns, including pet dander, plant pollen, smoke, fibers, dust, and various odors.
  • Properly Sealed: Filters are sealed to protect their lifespan. It is crucial to remove the plastic packaging before installation.
  • Easy to Replace: Features a convenient 3-in-1 design for straightforward replacement.
  • Long Lifespan: Recommended replacement every 3-6 months, depending on usage frequency and air quality conditions.

Setup and Installation

Follow these steps to install your new AIRTOK AP1002 Replacement Filter:

  1. Ensure the AIRTOK AP1002 air purifier is powered off and unplugged from the electrical outlet.
  2. Locate the filter compartment on your air purifier. Refer to your air purifier's main instruction manual for specific access details.
  3. Remove the old filter. Dispose of the used filter responsibly.
  4. Unwrap the new AP1002-RF filter from its plastic packaging. Failure to remove plastic packaging will prevent the filter from functioning correctly.
  5. Insert the new filter into the air purifier's filter compartment, ensuring it is seated correctly.
  6. Close the filter compartment cover securely.
  7. Plug the air purifier back into the electrical outlet and power it on.
Diagram showing steps to replace the AIRTOK air purifier filter
Figure 1: Visual guide for filter replacement. This image illustrates the process of removing the old filter, unwrapping the new filter, inserting it into the air purifier, and reinstalling the cover.

Operating Instructions (Filter Reset)

After replacing the filter, you must reset the filter replacement indicator on your AIRTOK AP1002 air purifier:

  1. With the new filter installed and the air purifier powered on, locate the filter replacement indicator button.
  2. Press and hold the filter replacement indicator button for approximately 3-5 seconds.
  3. You should hear a beep, and the indicator light will turn off, confirming the reset.
AIRTOK AP1002 Air Purifier with replacement filter
Figure 2: The AIRTOK AP1002 air purifier shown with its compatible replacement filter. This image highlights the filter's design in relation to the air purifier unit.

Maintenance

To ensure continuous optimal performance of your AIRTOK air purifier, regular filter replacement is essential:

  • It is recommended to replace the filter every 3-6 months.
  • The actual replacement interval may vary based on the frequency of air purifier use and the level of air pollution in your environment. In highly polluted areas or with continuous use, more frequent replacement may be necessary.
  • The air purifier's filter replacement indicator will illuminate after approximately 1,500 hours of continuous operation to remind you to change the filter.
Comparison of a new filter element and an old filter element
Figure 3: A visual comparison between a new, clean filter element and an old, used filter element, demonstrating the accumulation of particles over time.

Troubleshooting

Filter Replacement Indicator Remains On After Changing Filter

If the filter replacement indicator light continues to blink or remain on after you have installed a new filter, it may not have been reset correctly. Please follow the operating instructions above to reset the filter indicator by pressing and holding the designated button for 3-5 seconds until a beep is heard and the light turns off.

Product Specifications

BrandAIRTOK
Model InfoAP1002-RF
Item Weight1.7 pounds
Product Dimensions14.7 x 11.2 x 1.8 inches
Compatible DeviceAIRTOK AP1002 Air Purifier
Material TypePlastic, Polypropylene
MERV Rating13
Dimensions of the AIRTOK AP1002 Replacement Filter
Figure 4: Detailed dimensions of the AIRTOK AP1002 Replacement Filter, showing its length, width, and thickness.

Product Media

Images

AIRTOK H13 True HEPA Replacement Filter
Figure 5: The AIRTOK H13 True HEPA Replacement Filter, showcasing its pleated design and activated carbon layer.
Diagram of the H13 HEPA 3-in-1 Filter system
Figure 6: An illustration detailing the three-stage filtration system of the H13 HEPA filter, including the pre-filter, H13 True HEPA filter, and activated carbon filter.
AIRTOK air purifier operating in a living room
Figure 7: The AIRTOK air purifier shown in a living room setting, illustrating its function in purifying indoor air from various contaminants like dust, allergens, and odors.

Official Product Videos

H13 True HEPA Filter Overview

This video provides a detailed overview of the H13 True HEPA filter, explaining its filtration capabilities and benefits for air purification. It demonstrates how the filter captures various airborne particles to improve air quality.

AP1002 Replacement Filter Installation Guide

This video demonstrates the step-by-step process of replacing the AP1002 filter in the AIRTOK air purifier. It covers how to access the filter compartment, remove the old filter, install the new one, and properly secure the unit.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your AIRTOK Air Purifier AP1002 Replacement Filter, please refer to the original air purifier's user manual or contact AIRTOK customer service directly. Contact details are typically available on the manufacturer's official website or within the product packaging.

Related Documents - AP1002-RF

Preview Airtok AP1002 Air Purifier: Owner's Manual & Operating Guide
Comprehensive owner's manual for the Airtok AP1002 air purifier. Learn about setup, operation, filter replacement, troubleshooting, and specifications for this H13 True HEPA air cleaner designed for home use.
Preview How to Replace Filter for AIRTOK AP0601 Air Purifier
Step-by-step instructions on how to replace the filter for your AIRTOK AP0601 Air Purifier. Learn how to safely remove the old filter and install a new one.
Preview Airtok AP1001 Air Purifier Owner's Manual
Owner's manual for the Airtok AP1001 air purifier, including safety instructions, packing list, product introduction, operating guide, troubleshooting, and specifications.
Preview Airtok AP1001 Air Purifier Owner's Manual
Comprehensive owner's manual for the Airtok AP1001 air purifier, covering safety instructions, packing list, product introduction, operating guide, quick start scenarios, filter replacement, power adapter location, product specifications, warranty, and troubleshooting.
Preview Airtok AP0601 Air Purifier Owner's Manual
Comprehensive owner's manual for the Airtok AP0601 Air Purifier, detailing setup, operation, safety, maintenance, and troubleshooting for UK, Germany, France, Italy, and Spain.
Preview Airtok AP3001WF Air Purifier User Manual
User manual for the Airtok AP3001WF Air Purifier, covering safety information, specifications, product overview, operation guide, getting started, aromatherapy, care and maintenance, and troubleshooting.