1. Introduction
The Philips Avent Natural glass baby bottle is designed to support a natural feeding rhythm, allowing babies to control the pace of milk flow similar to breastfeeding. This product is ideal for parents who wish to combine breast and bottle feeding.
The bottles are made from premium borosilicate glass, which is BPA-free, heat, and thermal shock resistant. This ensures safety for fridge storage, warming, washing, and sterilization. The included Natural Response nipple (Flow 2) is breast-shaped, soft, and flexible, promoting a comfortable latch and preventing milk flow unless the baby actively drinks.
An integrated anti-colic valve helps to reduce air intake, minimizing colic and discomfort for your baby.
2. What's in the Box
- 4x 4oz Natural Glass baby bottles
- 4x Flow 2 Natural Response nipples
3. Safety Information
- Always supervise your baby during feeding.
- Never use feeding nipples as a soother.
- Continuous and prolonged sucking of fluids will cause tooth decay.
- Always check food temperature before feeding.
- Inspect all components before each use. Discard at the first signs of damage or weakness.
- Keep all components not in use out of children's reach.
- Glass bottles can break. Handle with care.
4. Assembly
Before first use, disassemble and clean all parts. Sterilize as per instructions in Section 5.
- Place the nipple into the screw ring, pulling it until it is securely seated.
- Ensure the anti-colic valve on the nipple is aligned with the notch on the screw ring.
- Screw the assembled nipple and screw ring onto the bottle until tight.
- Fill the bottle with milk or formula.
- Place the cap over the nipple to keep it clean during transport.
Image: A baby feeding from a Philips Avent Natural Glass Baby Bottle, demonstrating how the baby controls the milk flow, similar to breastfeeding.
5. Cleaning and Sterilization
Proper cleaning and sterilization are crucial for your baby's health. The premium borosilicate glass is designed for easy and safe sterilization.
Cleaning:
- Disassemble all bottle components (bottle, nipple, screw ring, cap).
- Wash all parts thoroughly in warm, soapy water using a clean bottle brush.
- Rinse all components thoroughly under running water.
- All parts are dishwasher safe (top rack only).
Sterilization:
Sterilize all cleaned components using one of the following methods:
- Boiling: Place disassembled parts in a pot of boiling water for 5 minutes. Ensure parts do not touch the sides of the pot to prevent damage.
- Steam Sterilizer: Use a Philips Avent steam sterilizer or another suitable steam sterilizer according to its instructions.
- Microwave Sterilizer: Use a microwave sterilizer according to its instructions.
- Cold Water Sterilization: Use sterilization tablets/liquid according to the manufacturer's instructions.
Image: A Philips Avent Natural Glass Baby Bottle highlighting its pure glass construction and resistance to heat and thermal shock, making it suitable for sterilization.
6. Usage and Feeding Instructions
The Philips Avent Natural Response nipple is designed to work with your baby's natural feeding rhythm, releasing milk only when the baby actively drinks. This helps to prevent spills and supports a comfortable latch.
- Ensure the bottle and nipple are clean and sterilized.
- Prepare milk or formula according to manufacturer instructions and fill the bottle.
- Always check the temperature of the milk before feeding by shaking a few drops onto your wrist.
- Position the nipple in your baby's mouth, ensuring a wide latch.
- Observe your baby's feeding cues. The nipple is designed to pause milk flow when your baby pauses to swallow and breathe, mimicking breastfeeding.
Image: A baby feeding from the bottle, illustrating the nipple's unique design that ensures milk release only during active sucking.
Image: A comparison showing a baby bottle-feeding and a baby breastfeeding, highlighting the bottle's design for easy combination feeding.
7. Nipple Flow Rates
Philips Avent Natural Response nipples are available in various flow rates to match your baby's drinking rhythm. The bottles in this pack come with a Slow Flow (Flow 2) nipple.
Age is a general guide; observe your baby's feeding cues to determine the appropriate flow rate.
- Flow 1 (Extra Slow): For newborns and very slow drinkers.
- Flow 2 (Slow): Included with this product, suitable for most newborns and young infants.
- Flow 3 (Medium): For babies who drink more quickly.
- Flow 4 (Fast): For older babies or those with a strong suck.
- Flow 5 (Extra Fast): For very fast drinkers or thicker liquids.
When to adjust flow:
- Try a lower flow: If milk is leaking from your baby's mouth or your baby is gulping.
- Try a higher flow: If your baby is playing with the nipple instead of drinking or seems frustrated.
Image: Detail of the Natural Response Nipple, showing the 'Slow' flow rate (Flow 2).
Image: A visual guide to the five available flow rates for Philips Avent Natural Response nipples.
8. Storage
Store cleaned and sterilized bottles in a dry, covered container. The premium borosilicate glass is safe for fridge storage of milk or formula.
When transporting bottles, ensure the cap is securely placed over the nipple to prevent leaks and maintain hygiene.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Milk not flowing from nipple. | Baby not actively sucking; nipple vent blocked. | Ensure baby is actively sucking. Check nipple vent for blockages and clean if necessary. |
| Milk leaking from baby's mouth. | Nipple flow rate is too fast for baby. | Switch to a lower flow nipple (e.g., Flow 1). |
| Baby seems frustrated or pulls away. | Nipple flow rate is too slow for baby. | Switch to a higher flow nipple (e.g., Flow 3). |
| Bottle components do not fit together. | Parts are not aligned correctly or are damaged. | Ensure all parts are dry and correctly aligned. Inspect for damage and replace if necessary. |
10. Specifications
- Brand: Philips Avent
- Model: B098YHHV3Q
- Capacity: 4 fluid ounces (per bottle)
- Number of Items: 4 bottles
- Material: Premium Borosilicate Glass (BPA Free)
- Nipple Type: Natural Response, Vented
- Liquid Flow Speed: Slow (Flow 2)
- Item Weight: Approximately 4 ounces (per bottle)
11. Warranty and Support
For product support, warranty information, or to purchase replacement parts, please visit the official Philips Avent website or contact their customer service directly.
Philips Avent products are designed for durability and safety. If you experience any issues, please refer to the troubleshooting section or reach out to customer support for assistance.