COOSPO BC107 Wireless GPS Bike Computer User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your COOSPO BC107 Wireless GPS Bike Computer. Please read this manual thoroughly before using the device to ensure proper function and to maximize your cycling experience.

2. Product Overview

2.1 Key Features

• Compact and Lightweight Design: Features a 2.4-inch display, encased in durable ABS and TPU materials.
• Global Positioning: Supports GPS and BEIDOU for accurate worldwide positioning and automatic time calibration.
• ANT+ Sensor Compatibility: Connects seamlessly with ANT+ sensors such as heart rate monitors, speed/cadence sensors, and power meters.
• CoospoRide App Integration: Easy device configuration and activity synchronization with Strava via the CoospoRide mobile application.
• IP67 Waterproof Rating: Designed to withstand splashes and rain, suitable for various weather conditions.
• Automatic Backlight: Calculates sunrise and sunset times based on GPS data to automatically adjust backlight.
• Long Battery Life: Built-in 1000mAh rechargeable battery provides approximately 28 hours of continuous use in GPS mode.

2.2 Package Contents

Ensure all items are present in the package:

• COOSPO BC107 GPS Bike Computer
• GPS Bike Computer Mount (with rubber bands)
• Micro USB Charging Cable
• User Manual

Image: COOSPO BC107 package contents, showing the bike computer, a GPS bike computer mount, and a Micro USB charging cable.

3. Setup

3.1 Charging the Device

Before first use, fully charge the BC107 using the provided Micro USB cable. Connect the cable to the charging port on the device and a standard USB power source. The battery indicator on the screen will show charging status.

Image: Close-up of the COOSPO BC107 showing the Micro USB charging port, highlighting its waterproof design and 28-hour battery life.

3.2 Mounting the Bike Computer

The BC107 can be mounted on your bike's stem or handlebars using the included mount and rubber bands. Secure the mount firmly to prevent movement during rides.

1. Place the mount on your desired location (stem or handlebar).
2. Use the rubber bands to secure the mount tightly.
3. Align the BC107 with the mount and twist it clockwise until it locks into place.

3.3 Initial Power On and GPS Acquisition

Press and hold the power button to turn on the device. The BC107 will automatically search for GPS and BEIDOU signals and calibrate the time. For best results, perform initial GPS acquisition in an open outdoor area.

4. Operating Instructions

4.1 Button Functions

The BC107 features three main buttons for navigation and control:

• Left Button (Power/Menu): Press and hold to power on/off. Short press to enter menu/settings.
• Middle Button (Start/Pause/Confirm): Short press to start/pause recording. In menu, press to confirm selection.
• Right Button (Lap/Next): Short press to mark a lap. In menu, press to navigate to the next option.

Image: Front view of the COOSPO BC107 bike computer, displaying its screen and the three control buttons at the bottom.

4.2 Time Zone and Unit Settings

You can adjust the time zone and measurement units (metric/imperial) through the device settings.

1. Hold the Left Button to enter setting mode.
2. Use the Right Button to navigate through setting pages (P1 - P5).
3. For Time Zone (P3): Press the Middle Button to select. Use the Right Button to set the numbers. Press the Middle Button to save and exit.
4. For Metric/Imperial Units (P4): Press the Middle Button to select. Use the Right Button to toggle between KMH and MPH. Press the Middle Button to save and exit.
5. The device will automatically exit settings if no operation is detected for 6 seconds.

Image: Instructional diagram illustrating the steps to set the time zone and switch between metric and imperial units on the BC107 bike computer.

4.3 Automatic Backlight and Time Calibration

The BC107 automatically calculates sunrise and sunset times using GPS information and adjusts the backlight accordingly. It also performs automatic time calibration via GPS.

Image: Illustration of the COOSPO BC107's automatic backlight feature, demonstrating its visibility during both day and night cycling conditions.

5. Sensor Compatibility

The BC107 supports ANT+ sensors for enhanced data collection. It uses Bluetooth for app pairing, but does not support Bluetooth connection for sensors.

5.1 Pairing ANT+ Sensors

The BC107 can connect with various ANT+ sensors:

• Heart Rate Monitors
• Speed Sensors
• Cadence Sensors
• Power Meters

To pair a sensor:

1. Ensure the sensor is active and within range of the BC107.
2. Enter the BC107's settings menu (refer to Section 4.2).
3. Navigate to the sensor pairing section.
4. Select the type of sensor you wish to pair. The BC107 will search for available ANT+ devices.
5. Select your sensor from the list to complete pairing.

Image: The COOSPO BC107 screen alongside various ANT+ compatible sensors, including a heart rate monitor, heart rate armband, speed and cadence sensor, and power meter, illustrating its broad compatibility.

6. CoospoRide App and Strava Synchronization

6.1 CoospoRide Application

The CoospoRide app allows for easy configuration of your BC107 and provides detailed analysis of your cycling activities. It is available for both Android and iOS devices.

• Quickly connect and set up the device.
• Record and analyze cycling activity data.
• Update firmware.

Image: Screenshot of the CoospoRide application interface on a smartphone, demonstrating its features for device settings, activity recording, and data analysis.

6.2 Synchronizing with Strava

You can synchronize your activity (.fit) files to Strava via the CoospoRide app on your phone. Note: Direct upload of .fit files to Strava via USB transmission on your PC is not supported.

1. Ensure your BC107 is paired with the CoospoRide app via Bluetooth.
2. Open the CoospoRide app and synchronize your ride data from the BC107.
3. Within the CoospoRide app, link your Strava account.
4. Your activities will then be automatically uploaded to Strava after synchronization with the app.

Image: Visual representation of the data synchronization flow from the COOSPO BC107 bike computer to the CoospoRide mobile application, and subsequently to the Strava platform.

7. Maintenance

• Cleaning: Wipe the device with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners.
• Storage: Store the BC107 in a cool, dry place when not in use. Avoid extreme temperatures.
• Battery Care: For optimal battery life, charge the device regularly and avoid fully discharging it for extended periods.
• Water Resistance: The device is IP67 waterproof, meaning it is protected against temporary immersion in water. However, avoid prolonged submersion or high-pressure water jets. Ensure the charging port cover is securely closed.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the official CooSpo website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Online Resources:

• CooSpo Official Website
• CooSpo Support Page