Product Overview
The Fellowes Lunar A4 Laminator CRC 57156 is designed for protecting and preserving your documents. This laminator is suitable for A4 size documents and uses laminating pouches up to 125 microns thick. It features visual and audible indicators for readiness and a jam release function for convenience, ensuring smooth operation for your lamination needs.
Important Safety Instructions
Please read these instructions carefully before using the laminator. Keep this manual for future reference.
- Always connect the laminator to a properly grounded power outlet.
- Do not operate the laminator if the power cord or plug is damaged.
- Keep hands and loose clothing away from the entry and exit slots during operation.
- Do not laminate objects thicker than the recommended pouch thickness (125 microns).
- Avoid laminating heat-sensitive materials without proper testing.
- Unplug the laminator when not in use or before cleaning.
- This appliance is not intended for use by children.
- Ensure adequate ventilation around the machine during use.
Setup Guide
- Unpack the Laminator: Carefully remove the laminator from its packaging. Retain packaging for storage or transport.
- Placement: Place the laminator on a stable, flat surface near a power outlet. Ensure there is enough space behind the machine for laminated documents to exit freely.
- Connect Power: Plug the power cord into a suitable electrical outlet.
- Power On: Locate the power switch, usually on the side or back of the machine, and turn it to the 'ON' position.
- Warm-up: The laminator will begin to warm up. The warm-up time is approximately 4 minutes. The ready indicator light (and possibly an audible signal) will activate when the machine is ready for use.

Image: The Fellowes Lunar A4 Laminator showing the power switch and ready indicators. The machine is white with a black control panel.
Operating Instructions
Once the laminator has warmed up and the ready indicator is active, you can begin laminating.
- Prepare Document: Place your document inside a laminating pouch. Ensure the document is centered and there is an even border around all edges.
- Insert Pouch: Insert the sealed edge of the laminating pouch into the laminator's entry slot. The machine has a 240mm entry width, suitable for A4 documents.
- Lamination Process: The laminator will automatically feed the pouch through. Do not pull or push the pouch during this process.
- Retrieve Document: Once the laminated document exits the machine, place it on a flat surface to cool. Be cautious as the document may be warm.
- Jam Release: In case of a misfeed or jam, activate the jam release feature (often a button or lever) to safely remove the pouch.

Image: A close-up view of the laminator's entry slot, clearly showing the "Insert Sealed Edge First" instruction and size guides for A4, A5, A6 documents.
Maintenance and Care
- Cleaning: Ensure the laminator is unplugged and completely cool before cleaning. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Roller Cleaning: Periodically run a laminator cleaning sheet (available separately) through the machine to remove adhesive residue from the rollers.
- Storage: Store the laminator in a clean, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Laminator not turning on. | Not plugged in; power switch off; power outage. | Check power cord connection; ensure power switch is ON; check power supply. |
| Pouch jams in the machine. | Pouch inserted incorrectly (open end first); pouch too thick; document too large. | Use the jam release feature; ensure sealed edge is inserted first; use correct pouch thickness; ensure document fits pouch. |
| Laminated document is cloudy or bubbly. | Temperature too low; pouch too thick for setting. | Allow more warm-up time; ensure correct pouch thickness is used. |
| Laminated document is wavy or curled. | Temperature too high; document not cooled flat. | Allow machine to cool slightly; place laminated document on a flat surface to cool. |
Specifications
- Brand: Fellowes
- Model Number: CRC 57156
- Laminator Type: Pouch Laminator
- Color: White
- Maximum Pouch Thickness: 125 microns
- Entry Width: 240 mm (suitable for A4 documents)
- Warm-up Time: Approximately 4 minutes
- Lamination Speed: 30 cm/minute (A4 document in approximately 1 minute)
- Features: Ready indicators (audible and visual), Jam release mechanism.
Warranty and Support
This Fellowes product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your product or visit the official Fellowes website. For technical support, spare parts, or service inquiries, please contact Fellowes customer service through their official channels.





