Introduction
This user manual provides detailed instructions for the operation and maintenance of your Altec Lansing HydraJolt Wireless Bluetooth Speaker. Please read this manual thoroughly before using the device to ensure proper functionality and longevity.
Package Contents
Verify that all items are present in the package:
- Altec Lansing HydraJolt Wireless Bluetooth Speaker
- Charging Cable (Type-C)
- User Manual (this document)
Product Overview
Familiarize yourself with the components and features of your HydraJolt speaker.
Figure 1: Top view of the Altec Lansing HydraJolt speaker with button functions labeled. From left to right: Power On/Off, LED Light Control, True Wireless Pairing, Volume Down, Voice Control, Volume Up.
Figure 2: Front view of the Altec Lansing HydraJolt speaker, showcasing its robust design and illuminated LED light strips.
Figure 3: Side view of the HydraJolt speaker, highlighting the built-in USB charging port for external devices, protected by a rubber flap.
Key Features:
- Deep and Clear Audio: Dual 1.5" drivers and an 86mm x 35mm passive radiator for enhanced sound.
- Everything Proof: IP67 waterproof, dustproof, shockproof, and floats in water.
- Portable Design: Integrated carabiner hook for easy attachment.
- Extended Playtime: Up to 16 hours of battery life.
- Type-C Charging: Fast and convenient recharging.
- Built-in Phone Charger: USB port to charge external devices.
- Multi-Light & Strobe Modes: 11 LED light modes for visual effects.
- True Wireless Pairing: Connect two HydraJolt speakers for stereo sound.
- 100-Foot Bluetooth Range: Extended wireless connectivity.
Setup
Charging the Speaker:
- Locate the Type-C charging port on the side of the speaker, protected by a rubber flap.
- Open the rubber flap.
- Connect the provided Type-C charging cable to the speaker's charging port.
- Connect the other end of the cable to a USB power adapter (not included) or a powered USB port.
- The charging indicator light will illuminate. A full charge takes approximately 16 hours.
- Once fully charged, disconnect the cable and securely close the rubber flap to maintain water resistance.
Initial Bluetooth Pairing:
- Ensure the speaker is fully charged.
- Press and hold the Power On/Off button (located on the top panel) for a few seconds until you hear an audible prompt and the LED lights begin to flash, indicating pairing mode.
- On your mobile device (smartphone, tablet, laptop), navigate to the Bluetooth settings.
- Search for available devices. The speaker will appear as "Altec Lansing HydraJolt" or similar.
- Select the speaker from the list to initiate pairing.
- Once successfully paired, you will hear a confirmation tone, and the LED lights will change to a steady pattern.
Operating Instructions
Power On/Off:
- To power on, press and hold the Power button.
- To power off, press and hold the Power button again.
Bluetooth Connection:
- After initial pairing, the speaker will automatically attempt to connect to the last paired device when powered on.
- If connection fails, ensure Bluetooth is enabled on your device and the speaker is within range (up to 100 feet).
Audio Playback:
- Use the Volume Up (+) and Volume Down (-) buttons on the speaker to adjust the playback volume.
- Playback controls (play/pause, skip track) are typically managed from your connected Bluetooth device.
LED Light Control:
- Press the LED Light Control button to cycle through the 11 available light modes.
- Modes include various colors, strobes, and patterns that react to music.
True Wireless Pairing (TWS):
To connect two HydraJolt speakers for a stereo audio experience:
- Ensure both HydraJolt speakers are powered on and not connected to any Bluetooth device.
- On one speaker (this will be the primary speaker), press and hold the True Wireless Pairing button until you hear a prompt.
- The primary speaker will search for the second speaker.
- Once connected, you will hear a confirmation tone, and the speakers will function as a stereo pair.
- Now, connect your Bluetooth device to the primary speaker as usual.
Using the Built-in Phone Charger:
- Open the rubber flap on the side of the speaker to access the USB-A output port.
- Connect your device's charging cable to this USB-A port.
- The speaker's internal battery will begin charging your connected device.
- Close the rubber flap securely after use to maintain water resistance.
Voice Control:
- Press the Voice Control button to activate your connected device's voice assistant (e.g., Siri, Google Assistant).
- Speak your command clearly into the speaker's microphone.
Official Product Video:
Video 1: A brief overview of the Altec Lansing HydraJolt Waterproof Bluetooth Speaker, demonstrating its key features and rugged design. This video highlights the speaker's portability and water resistance.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the speaker. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the speaker in a cool, dry place when not in use. Avoid extreme temperatures.
- Water Resistance: Ensure all rubber flaps and port covers are securely closed before exposing the speaker to water to maintain its IP67 rating.
- Battery Care: For optimal battery life, avoid fully discharging the speaker frequently. Recharge it regularly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not turn on. | Battery is depleted. | Charge the speaker fully using the provided Type-C cable. |
| Cannot pair with Bluetooth device. | Speaker is not in pairing mode; device Bluetooth is off; speaker is too far. | Ensure speaker is in pairing mode (flashing LEDs). Turn on Bluetooth on your device. Move device closer to speaker (within 100 ft). |
| No sound or low volume. | Volume too low on speaker or device; speaker not connected. | Increase volume on both speaker and connected device. Re-establish Bluetooth connection. |
| Sound cuts out intermittently. | Device is out of range; interference. | Move device closer to the speaker. Avoid obstacles between speaker and device. |
| Cannot charge external device. | Speaker battery is low; cable issue. | Ensure speaker has sufficient charge. Try a different charging cable. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | HydraJolt |
| Model Number | IMW1200-BLK-STK-2 |
| Connectivity Technology | Bluetooth |
| Wireless Range | Up to 100 feet |
| Battery Life | Up to 16 hours |
| Charging Time | Approximately 16 hours |
| Water Resistance Level | IP67 (Waterproof, Dustproof, Shockproof, Floats) |
| Speaker Output Power | 50 Watts |
| Product Dimensions | 7.4"D x 3"W x 5.7"H |
| Item Weight | 1.3 Pounds |
| Power Source | Battery Powered |
| Included Components | Bluetooth Speaker |
| UPC | 021331023643 |
| Manufacturer | Altec Lansing Technologies |
| Country of Origin | China |
Warranty and Support
Warranty Information:
The Altec Lansing HydraJolt Wireless Bluetooth Speaker comes with a Limited Warranty. For specific terms and conditions, please refer to the warranty card included in your product packaging or visit the official Altec Lansing website.
Customer Support:
For technical assistance, troubleshooting, or warranty claims, please contact Altec Lansing customer support through their official website or the contact information provided in your product documentation. You can also visit the Altec Lansing Store on Amazon for additional resources.
