1. Introduction
Thank you for choosing the Altec Lansing HydraMini Wireless Bluetooth Speaker. This compact and durable speaker is designed to provide high-quality audio in various environments, featuring IP67 Everything Proof protection against water, snow, and dirt. Its portable design, long battery life, and integrated LED lights make it ideal for outdoor adventures, parties, or everyday use. This manual provides detailed instructions to help you get the most out of your speaker.
Image: Top-down view of the Altec Lansing HydraMini Wireless Bluetooth Speaker in Mint Green, showcasing its compact, hexagonal design and speaker grille.
2. What's in the Box
Ensure all items are present upon unboxing:
- Altec Lansing HydraMini Wireless Bluetooth Speaker
- USB-C Charging Cable
- Carabineer Clip
- Quick Start Guide
3. Initial Setup
3.1 Charging the Speaker
Before first use, fully charge your HydraMini speaker. Connect the provided USB-C charging cable to the speaker's charging port and a compatible USB power source. The charging time is approximately 6 hours for a full charge, providing up to 6 hours of playtime.
3.2 Powering On/Off
To power on the speaker, press and hold the Power button located on the top panel until you hear an audible cue and the LED lights activate. To power off, press and hold the Power button again until the lights turn off.
3.3 Bluetooth Pairing
The HydraMini speaker is ready for pairing when powered on. On your device (smartphone, tablet, etc.), enable Bluetooth and search for 'HydraMini'. Select it from the list of available devices to connect. A successful connection will be indicated by an audible tone.
3.4 True Wireless Pairing (TWS)
For an enhanced stereo experience, you can pair two HydraMini speakers together:
- Ensure both HydraMini speakers are powered on and not connected to any other Bluetooth device.
- On one speaker, press and hold the True Wireless Pairing button (often indicated by a chain link icon) for a few seconds.
- The speakers will automatically search for and connect to each other. Once connected, you will hear a confirmation tone.
- Now, connect your device to one of the paired speakers via Bluetooth. Audio will play in stereo across both speakers.
Image: Overview of key features including playtime, IP67 rating, USB-C quick charge, and True Wireless Pairing.
4. Operating Your Speaker
4.1 Button Functions
Image: Detailed view of the speaker's top panel with labels for Power On/Off, True Wireless Pairing, LED Light Control, Voice Control, Volume Down, and Volume Up buttons.
- Power On/Off Button: Press and hold to power on or off.
- True Wireless Pairing Button: Press and hold to initiate TWS pairing with another HydraMini speaker.
- LED Light Control Button: Press to cycle through 5 different LED light modes (beat, strobe, pulse, etc.).
- Voice Control Button: Press to activate your device's voice assistant (Siri, Google Assistant).
- Volume Down Button: Press to decrease volume.
- Volume Up Button: Press to increase volume.
4.2 Using the Carabineer Clip
The integrated carabineer clip allows for easy portability. You can clip the speaker to your backpack, belt loop, briefcase, or luggage for convenient access to your music on the go.
4.3 Built-in Microphone
The HydraMini features a built-in microphone, allowing you to make and answer calls directly through the speaker when connected to your smartphone. Ensure the speaker is within range of your phone for clear communication.
5. Maintenance and Care
To ensure the longevity and optimal performance of your Altec Lansing HydraMini speaker, follow these care guidelines:
- Cleaning: Use a soft, damp cloth to clean the exterior of the speaker. Do not use harsh chemicals or abrasive cleaners.
- Water Protection: While IP67 rated, ensure the charging port cover is securely closed before exposing the speaker to water or dust. After exposure to water, wipe the speaker dry before opening the port.
- Storage: Store the speaker in a cool, dry place away from extreme temperatures and direct sunlight when not in use for extended periods.
- Battery Care: To preserve battery life, avoid fully discharging the speaker frequently. Recharge the battery regularly, even if not in constant use.
6. Troubleshooting
If you encounter issues with your HydraMini speaker, refer to the following common problems and solutions:
| Problem | Possible Solution |
|---|---|
| Speaker does not power on. | Ensure the speaker is fully charged. Connect it to a power source and try again. |
| Cannot pair with Bluetooth device. | Ensure the speaker is in pairing mode (LED blinking). Turn off and on Bluetooth on your device. Move speaker closer to device. Forget 'HydraMini' from your device's Bluetooth list and re-pair. |
| No sound or low volume. | Increase volume on both the speaker and your connected device. Ensure speaker is not muted. Check if the speaker is connected to the correct device. |
| Poor sound quality / distortion. | Move speaker closer to your device to reduce interference. Ensure no obstacles are between the speaker and device. Reduce volume if distortion occurs at high levels. |
| Short battery life. | Ensure the speaker is fully charged before use. Battery life can vary with volume level and LED light usage. |
7. Technical Specifications
| Feature | Detail |
|---|---|
| Model Name | HydraMini |
| Model Number | IMW1000-MTG-STK-2 |
| Material | Durable, water-resistant plastic or synthetic material |
| Speaker Type | Outdoor |
| Special Feature | Portable, Stereo Pairing (True Wireless) |
| Recommended Uses | Music, Outdoor, Camping, Beach |
| Compatible Devices | Smartphone, Tablet, MP3 Player, Desktop, Television, Projector, Laptop |
| Unit Count | 1.0 Count |
| Controller Type | Battery Powered |
| Color | Mint Green |
| Battery Life | Up to 6 Hours |
| Charging Time | 6 Hours |
| Included Components | Bluetooth Speaker, USB-C Charging Cable, Carabineer Clip |
| Product Dimensions | 6.1"D x 2.1"W x 5.4"H |
| Item Weight | 0.5 Pounds (8 ounces) |
| Water Resistance Level | IP67 (Waterproof, Snowproof, Dirtproof) |
| Number of Batteries | 1 Lithium Polymer (included) |
| Audio Driver Type | Dynamic Driver |
| Bluetooth Range | 100 Feet |
| Number of Microphones | 1 |
| Speaker Maximum Output Power | 10 Watts |
| Connectivity Technology | Bluetooth, USB |
| Audio Output Mode | Stereo or Mono |
| Mounting Type | Freestanding, Plug Mount |
8. Warranty and Support
The Altec Lansing HydraMini Wireless Bluetooth Speaker comes with a Limited Warranty. For detailed warranty information, product registration, or technical support, please visit the official Altec Lansing website or contact their customer service. Keep your purchase receipt for warranty claims.
For further assistance, you may visit the Altec Lansing Store on Amazon.
9. Product Videos
Currently, there are no official product videos from the seller available for embedding in this manual. Please refer to the product page for any available videos.
