Introduction
Thank you for choosing the SHNUGGLE Newborn Baby Bath. This product is designed to provide a comfortable and secure bathing experience for your newborn. Please read this manual thoroughly before first use and retain it for future reference.
Key features of your SHNUGGLE Newborn Baby Bath include:
- Built-in "Bum Bump" support to help prevent baby from sliding.
- Soft foam backrest for enhanced comfort.
- Integrated drain plug for easy emptying and refreshing of water.
- Compact design to maintain water temperature for longer.
- Requires a minimum of 2 liters of water for effective use.
Image: Main view of the SHNUGGLE Newborn Baby Bath in Taupe color, showcasing its ergonomic design and integrated backrest.
Important Safety Information
WARNING: NEVER leave your child unattended in the bath, even for a moment. Drowning can occur quickly and in very shallow water.
- Always keep your child within arm's reach.
- Before placing your child in the bath, always check the water temperature to ensure it is safe and comfortable (approximately 37°C / 98.6°F).
- Ensure the bath is placed on a stable, flat, and non-slip surface.
- Do not overfill the bath. The water level should be appropriate for your child's size, ensuring their head and face are well above the water.
- This bath is suitable for newborns and infants up to approximately 12 months or when they can sit unaided. Discontinue use if your child attempts to stand or climb out.
- Regularly inspect the bath for any signs of damage or wear. Discontinue use if damaged.
Setup
- Unpacking: Remove the SHNUGGLE Newborn Baby Bath from its packaging. Ensure all packaging materials are disposed of safely.
- Inspection: Before first use, inspect the bath for any manufacturing defects or damage.
- Placement: Place the bath on a flat, stable, and secure surface, such as a bathroom floor or a sturdy countertop. Ensure it is not near any edges where it could fall.
- Drain Plug: Ensure the drain plug is securely inserted into the bottom of the bath before filling with water.
Image: Front view of the SHNUGGLE Newborn Baby Bath, highlighting its compact and stable base.
Operating Instructions
- Prepare the Bath Area: Gather all necessary bathing supplies (soap, washcloth, towel, clean diaper, clothes) before starting the bath.
- Fill with Water: Fill the bath with warm water. The bath requires a minimum of 2 liters of water. Do not exceed the recommended fill line, if present, or a level that would submerge your baby's chest when seated.
- Check Water Temperature: Always test the water temperature with your elbow or a bath thermometer. The ideal temperature is around 37°C (98.6°F).
- Place Baby in Bath: Gently place your baby into the bath, ensuring they are comfortably seated against the soft backrest and the "Bum Bump" support. Maintain a firm grip on your baby at all times.
- Bathing: Use a soft washcloth and baby-friendly soap to gently clean your baby. The ergonomic design allows for a more upright position, making it easier to wash your baby.
- Emptying the Bath: After bathing, carefully lift your baby out of the bath and wrap them in a towel. Once your baby is safe and secure, pull the drain plug at the bottom of the bath to empty the water.
Image: A baby comfortably seated in the SHNUGGLE bath, being gently washed by an adult, demonstrating the upright bathing position.
Image: A hand demonstrating the removal of the drain plug from the bottom of the SHNUGGLE bath for easy water drainage.
Maintenance
- Cleaning: After each use, wipe the bath clean with a damp cloth and mild soap. Rinse thoroughly to remove any soap residue.
- Drying: Allow the bath to air dry completely before storing to prevent mold or mildew growth.
- Storage: Store the bath in a clean, dry place away from direct sunlight and extreme temperatures.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, bleach, or harsh chemicals, as these can damage the bath material.
Troubleshooting
This section addresses common concerns. If you encounter an issue not listed here, please contact customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Water not draining properly. | Drain plug not fully removed or obstruction. | Ensure the drain plug is completely removed. Check for any debris blocking the drain hole. |
| Baby seems uncomfortable or slides. | Incorrect positioning or water level. | Ensure baby is seated correctly against the backrest with the "Bum Bump" support between their legs. Verify water level is appropriate. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SBP-TPE-EUR |
| Product Dimensions | 13.39 x 10.24 x 13.78 inches |
| Item Weight | 2.42 pounds (1.1 Kilograms) |
| Material Composition | 95% Polypropylene, 5% EVA foam |
| Maximum Weight Recommendation | 12 Kilograms |
| Included Components | Drain Plug |
| Product Care Instructions | Wipe with Damp Cloth |
Warranty and Support
For warranty information or customer support, please contact SHNUGGLE directly through their official website or the retailer where the product was purchased. Please retain your proof of purchase.
Manufacturer: Shnuggle
