1. Introduction
This manual provides essential information for the safe and effective use of your Satisfyer Pro 2 Violet. Please read it thoroughly before first use and retain it for future reference. The Satisfyer Pro 2 utilizes Airpulse technology to deliver pressure wave stimulation.
Image 1.1: Satisfyer Pro 2 Violet device and its retail packaging.
2. Safety Information
- For adult use only.
- Do not use if the device or charging cable is damaged.
- Discontinue use immediately if you experience any discomfort or pain.
- Consult a healthcare professional if you have any pre-existing medical conditions or concerns.
- Use only water-based lubricants with this device. Oil-based lubricants can damage the silicone material.
- Keep out of reach of children.
3. Setup
3.1 Initial Charge
Before first use, fully charge your Satisfyer Pro 2. Connect the included USB magnetic charging cable to the charging contacts on the device and a USB power source (e.g., computer USB port, USB wall adapter). The charging indicator will illuminate during charging and turn off when fully charged. A full charge typically takes approximately 2-3 hours.
3.2 First Use Preparation
Clean the device thoroughly before its initial use. Refer to the 'Maintenance' section for cleaning instructions. Apply a small amount of water-based lubricant to the stimulation head for enhanced comfort and experience.
4. Operating Instructions
4.1 Power On/Off
To turn the device on, press and hold the power button (⏻) for 2 seconds. To turn the device off, press and hold the power button (⏻) for 2 seconds again.
4.2 Adjusting Intensity
The Satisfyer Pro 2 features 11 pressure wave intensity levels. Once the device is on, press the '+' button to increase the intensity and the '-' button to decrease the intensity. Experiment to find your preferred level.
Image 4.1: Control buttons for power and intensity adjustment.
4.3 Airpulse Technology
The device uses patented Airpulse technology to create non-contact pressure waves for stimulation. Position the stimulation head over the desired area without direct contact to experience the air pulse sensations.
Image 4.2: Visual representation of the Airpulse Technology in operation.
4.4 Waterproof Use
The Satisfyer Pro 2 is waterproof to IPX7 rating, meaning it can be submerged in water up to 1 meter for 30 minutes. This allows for use in the shower or bath. Ensure the charging port is dry before connecting the charging cable.
5. Maintenance
5.1 Cleaning
Clean the device thoroughly after each use. Wash the device with warm water and a mild, toy-friendly soap or a specialized toy cleaner. Rinse thoroughly and pat dry with a lint-free cloth. Do not use alcohol, petroleum-based cleaners, or harsh chemicals, as these can damage the silicone.
5.2 Storage
Store the Satisfyer Pro 2 in a clean, dry place, away from direct sunlight and extreme temperatures. Keep it separate from other toys made of different materials to prevent material degradation.
Image 5.1: Key features of the Satisfyer Pro 2, including easy cleaning and waterproof design.
6. Troubleshooting
- Device not turning on: Ensure the device is fully charged. Press and hold the power button for 2 seconds.
- Device not charging: Check if the USB magnetic charging cable is properly connected to both the device and the power source. Try a different USB port or adapter.
- Weak or inconsistent sensation: Ensure the stimulation head is positioned correctly without direct contact. The battery might be low; try recharging.
- Unusual noise: While the device has a whisper mode, some motor sound is normal. If the noise is excessively loud or unusual, discontinue use and contact support.
If you encounter issues not listed here or if troubleshooting steps do not resolve the problem, please contact Satisfyer customer support.
7. Specifications
| Feature | Specification |
|---|---|
| Model Name | Satisfyer Pro 2 Violet |
| Model Number | E33183 |
| Dimensions | 11.6 x 7.5 x 19 cm |
| Weight | 0.39 g |
| Material | Body-friendly Silicone |
| Waterproof Rating | IPX7 |
| Intensity Levels | 11 Pressure Wave Intensities |
| Battery Type | Lithium Ion (included) |
| Charging | USB Magnetic Charging Cable |
8. Warranty and Support
Satisfyer offers a 15-year guarantee on this product. For warranty claims or technical support, please retain your proof of purchase.
For further assistance, you may contact the manufacturer directly:
- Manufacturer: Triple A Import GmbH
- Address: Am Lenkwark 3, 33609 Bielefeld, Germany
- Website: www.satisfyer.com
- Email: info@satisfyer.com
Image 8.1: Product packaging displaying warranty and manufacturer contact information.