Introduction
This manual provides detailed instructions for the ZdalaMit Replacement Remote Control, designed for seamless operation with the Furrion Entertainment System DV7200 and DV 7200 models. This remote control requires no programming and is ready for use upon battery installation.
Package Contents
- 1X ZdalaMit Replacement Remote Control
Note: AAA batteries are required and not included.
Setup
Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover, sliding it back into position until it clicks securely.
First Use
Once batteries are installed, the remote control is ready for immediate use. No additional programming or pairing is required for the Furrion Entertainment System DV7200.
Operating Instructions
This section details the functions of the buttons on your ZdalaMit Replacement Remote Control. Refer to the image below for visual identification of each button.
Figure 1: ZdalaMit Replacement Remote Control for Furrion DV7200. This image displays the full layout of the remote control, featuring various buttons for power, navigation, numeric input, and specific functions for the Furrion Entertainment System.
Button Functions
- PWR (Power): Turns the entertainment system on or off.
- APS: Likely for Auto Program Scan or similar function.
- SCAN: Initiates a scan function, possibly for radio stations or media files.
- CLOCK: Accesses or sets the system clock.
- + / - (Volume/Navigation): Increases or decreases volume. Also used for navigation in menus.
- Left/Right Arrows (Previous/Next Track): Navigates to the previous or next track/chapter.
- SEL (Select): Confirms a selection in menus.
- MODE (HITOP): Cycles through different operating modes (e.g., Radio, CD, USB, AUX).