1. Introduction
Thank you for choosing the MAIDeSITe T2 Pro Plus Electric Height Adjustable Desk Legs. This product is designed to provide a versatile and ergonomic workspace, allowing seamless transitions between sitting and standing positions. This manual provides essential information for assembly, operation, maintenance, and troubleshooting to ensure safe and efficient use of your desk legs.
2. Safety Information
Please read all safety instructions carefully before assembly and use. Failure to follow these instructions may result in injury or damage to the product.
- Weight Limit: Do not exceed the maximum load capacity of 160 kg (352 lbs). Overloading can cause instability and damage.
- Installation: Ensure the desk legs are properly installed on a stable, level surface to maintain stability during operation.
- Obstacle Detection: The desk features a built-in sensor that automatically stops movement and retracts approximately 5 cm if an obstacle is detected during height adjustment. However, always ensure the path is clear.
- Child Safety: Utilize the child lock function on the control panel to prevent accidental adjustments by children.
- Power Supply: Connect the desk to a grounded power outlet. Do not use damaged power cords or adapters.
- Maintenance: Do not attempt to disassemble or repair the motors or control unit yourself. Contact customer support for assistance.
3. Product Features
- Dual Motor System: Equipped with two powerful motors for fast (40mm/s) and stable height adjustments.
- Quiet Operation: Operates at a low noise level of under 45dB, ensuring a quiet working environment.
- Wide Height Range: Adjustable height from 62 cm to 125 cm, suitable for various user heights and activities.
- High Load Capacity: Supports up to 160 kg, accommodating multiple monitors and heavy equipment.
- Adjustable Frame Width: The frame can be extended from 100 cm to 180 cm, compatible with desktop lengths of 100-220 cm and widths of 60-100 cm (desktop thickness 2 cm or more).
- Anti-Collision System: Built-in sensor detects obstacles and automatically reverses direction to prevent damage.
- Memory Presets: Save up to four preferred height settings for quick one-touch adjustments.
- Sedentary Reminder: Set alarms (0.5h, 1h, 2h) to remind you to change positions and stand up.
- Child Lock: Prevents unintended operation of the desk.
- USB Charging Port: Conveniently charge your devices directly from the control panel.
- Durable Construction: Made with industrial-grade SPCC steel for enhanced stability and longevity.
Image: The MAIDeSITe T2 Pro Plus electric height adjustable desk legs with a wooden desktop, set up in a modern office environment.
Image: An illustration highlighting the dual motor system within the desk frame, emphasizing its power and efficiency.
Image: A visual representation of the anti-collision system, showing the desk retracting slightly after encountering an object like a rugby ball.
4. Setup
Assembly is required for the MAIDeSITe T2 Pro Plus desk legs. While some tools may be included, it is recommended to have basic assembly tools on hand. Please refer to the detailed assembly video for visual guidance.
4.1 Unpacking and Inspection
- Carefully unpack all components and lay them out on a clean, flat surface.
- Verify that all parts listed in the packing list are present and undamaged. If any parts are missing or damaged, contact customer support immediately.
4.2 Assembly Steps
- Attach the feet to the bottom of the lifting columns.
- Connect the lifting columns to the crossbar frame.
- Install the control box and connect all motor and control panel cables.
- Secure your chosen desktop (not included) to the assembled frame using appropriate screws. Ensure the desktop is centered and securely fastened.
Image: Exploded view of the desk leg components, illustrating the ease of assembly.
Video: An official MAIDeSITe assembly guide demonstrating the step-by-step process of setting up the electric height adjustable desk legs.
5. Operating Instructions
The MAIDeSITe T2 Pro Plus desk legs are controlled via a full touch panel.
5.1 Basic Height Adjustment
- Use the Up (▲) and Down (▼) arrows on the control panel to manually adjust the desk height.
- Release the button to stop movement at your desired height.
5.2 Memory Presets
- Adjust the desk to your desired height using the Up/Down arrows.
- Press the SET button.
- Press one of the numbered memory buttons (1, 2, 3, or 4) within 3 seconds to save the current height.
- To recall a saved height, simply press the corresponding numbered memory button. The desk will automatically move to that height.
5.3 Sedentary Reminder
- Press the 0.5h, 1h, or 2h button to activate the sedentary reminder.
- The desk will alert you after the set time to encourage you to change your posture.
5.4 Child Lock Function
- To activate the child lock, press and hold the Lock button (often indicated by a padlock icon) for a few seconds until the display shows 'LOC' or a lock icon.
- To deactivate, press and hold the Lock button again until the display unlocks.
Image: A close-up of the desk's full touch control panel, showing height display, memory buttons (1-4), sedentary reminder options (0.5h, 1h, 2h), and child lock function.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MAIDeSITe desk legs.
- Cleaning: Wipe the desk legs with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish.
- Cable Management: Periodically check all cables for wear or damage. Ensure cables are neatly organized and not pinched or stretched.
- Fasteners: Occasionally check all screws and bolts to ensure they are tight. Retighten if necessary.
- Lubrication: The lifting columns are designed for maintenance-free operation. Do not apply lubricants unless specifically instructed by customer support.
7. Troubleshooting
If you encounter any issues with your desk, please refer to the following troubleshooting guide before contacting customer support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move or respond to controls. | Power cable disconnected, child lock active, motor overload. | Check power connection. Deactivate child lock. Unplug for 10 minutes and retry. Reduce load if overloaded. |
| Desk moves unevenly or one leg is lower than the other. | Synchronization issue between motors. | Lower the desk to its absolute lowest position and hold the down button for 5-10 seconds until both legs are fully synchronized. This recalibrates the system. |
| Error code displayed on control panel. | Specific system fault. | Note the error code and refer to the full manual (if available) or contact customer support for specific instructions. Often, a power cycle (unplugging for 10 minutes) can resolve temporary errors. |
| Anti-collision system triggers too easily or not at all. | Sensor sensitivity setting or malfunction. | Check the full manual for instructions on adjusting sensor sensitivity. If the issue persists, contact customer support. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand | MAIDeSITe |
| Model | T2 Pro Plus |
| Height Adjustment Range | 62 cm - 125 cm |
| Frame Width Adjustment | 100 cm - 180 cm |
| Lifting Speed | 40 mm/s |
| Load Capacity | 160 kg |
| Noise Level | < 45 dB |
| Motor Type | Dual Motor |
| Frame Material | SPCC Steel |
| Compatible Desktop Sizes (L x W x T) | 100-220 cm x 60-100 cm x >2 cm |
| Control Panel Features | Memory Presets (4), Sedentary Reminder (0.5h, 1h, 2h), Child Lock, USB Charging Port |
| Assembly Required | Yes |
| Product Weight | 30 kg |
9. Warranty and Support
MAIDeSITe is committed to customer satisfaction and provides comprehensive support for its products.
9.1 Manufacturer's Warranty
The MAIDeSITe T2 Pro Plus Electric Height Adjustable Desk Legs come with a 5-year free manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
9.2 Customer Support
If you have any questions, require assistance with assembly, or encounter any issues during the use of your product, please do not hesitate to contact our customer support team.
- Email: amzservicejp1@maidesite.com
- Please provide your model number (T2 Pro Plus) and a detailed description of the issue when contacting support.
