Introduction
Thank you for choosing the Cecotec Bolero DressCode 8200 Inverter Steel Washing Machine. This manual provides essential information for the safe and efficient use, installation, and maintenance of your appliance. Please read it thoroughly before first use and keep it for future reference.
Front view of the Cecotec Bolero DressCode 8200 Inverter Steel Washing Machine, showcasing its modern design and control panel.
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury when using your appliance, follow these basic precautions:
- Read all instructions before using the appliance.
- Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances.
- Do not allow children to play on or in the appliance. Close supervision of children is necessary when the appliance is used near children.
- Do not reach into the appliance if the tub or agitator is moving.
- Do not install or store this appliance where it will be exposed to the weather.
- Do not tamper with controls.
- Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this manual.
- Always disconnect the appliance from the power supply before cleaning or performing maintenance.
Setup and Installation
Unpacking
Carefully remove all packaging materials. Ensure all components listed in the "What's in the Box" section are present.
- What's in the Box:
- 1 x Washing Machine
- 4 x Transport Feet
- 1 x Water Supply Hose
- 1 x User Manual
Removing Transport Bolts
Before using the washing machine, it is crucial to remove the transport bolts located at the rear of the appliance. Failure to do so can cause severe damage during operation.
Positioning and Leveling
Place the washing machine on a firm, level surface. Adjust the adjustable feet to ensure the appliance is perfectly level. This prevents excessive vibration and noise during operation.
Water Connection
Connect the supplied water inlet hose to the cold water tap and the corresponding inlet valve on the back of the washing machine. Ensure all connections are tight to prevent leaks.
Drainage Connection
Securely place the drain hose into a standpipe or over the edge of a sink, ensuring it is properly secured to prevent it from dislodging during the drain cycle.
Power Connection
Plug the power cord into a grounded electrical outlet. Do not use extension cords or adapters.
Operating Instructions
Control Panel Overview
The washing machine features a control panel with an LED display that provides information such as remaining wash time and selected program options.
Icon representing the LED display feature of the washing machine.
Loading Laundry
Open the door and load laundry into the drum. Do not overload the machine; ensure there is enough space for clothes to tumble freely. The maximum load capacity is 8 kg.
Icon indicating the 8 kg load capacity of the washing machine.
Adding Detergent and Softener
Add appropriate amounts of detergent and fabric softener to their respective compartments in the dispenser drawer.
Selecting a Program
Turn the program selector knob to choose one of the 16 available programs. The LED display will show the default settings for the selected program.
Available Programs:
- Cotton
- InstantWash 15'
- InstantWash 45'
- Wash 60'
- ECO 40-60
- Intensive
- Rinse
- Spin
- 20ºC
- Wool
- Delicate
- Mixed
- Synthetic
- Sport
- Sterilization
- MyFav
Temperatures are adjustable for most programs. The maximum spin speed is 1400 rpm.
Icon indicating the maximum 1400 RPM spin speed.
Special Functions
- DelayStart: Program the washing machine to start between 0 and 24 hours later.
Icon representing the DelayStart function.
- MyFav: Memorize your most frequently used program and settings for quick access.
Icon representing the MyFav function for saving favorite programs.
- Sterilization: A program that adjusts water temperature to 60ºC to sterilize your clothes.
Icon representing the Sterilization program.
- Prewash Function: An additional wash before the main cycle to remove surface dust from clothes.
- Extra Rinse Function: The clothes are rinsed one more time at the end of the selected program.
- Silence Function: Silences the washing machine, including the end-of-cycle sounds.
Inverter Plus Motor Technology
The Inverter Plus motor ensures high-quality performance and maximum durability, contributing to energy savings, reduced vibrations, and lower noise levels.
Icon representing the Inverter Plus motor technology.
DiamondCare Drum
The DiamondCare drum features a special diamond-shaped texture that facilitates and improves cleaning and garment sliding, washing clothes with utmost care and delicacy.
Maintenance and Cleaning
Regular maintenance ensures the longevity and optimal performance of your washing machine. Always unplug the appliance before cleaning.
Cleaning the Exterior
Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
Cleaning the Detergent Dispenser
Periodically remove and clean the detergent dispenser drawer to prevent residue buildup. Rinse it under running water and dry thoroughly before reinserting.
Cleaning the Drum
Run a maintenance wash cycle (e.g., a hot wash with no laundry and a descaling agent or white vinegar) regularly to clean the drum and remove any odors or residue.
Cleaning the Drain Filter
Locate the drain filter at the bottom front of the machine. Open the cover, place a shallow container underneath to catch water, and carefully unscrew the filter. Clean any lint or debris and rinse under water. Reinstall securely.
Troubleshooting
Before contacting customer service, please refer to the following common issues and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not start | Power cord unplugged, door not closed properly, program not selected, Start/Pause button not pressed. | Check power connection, ensure door is latched, select a program, press Start/Pause. |
| Water leakage | Loose hose connections, clogged drain filter, excessive detergent. | Tighten hose connections, clean drain filter, use appropriate amount of detergent. |
| Excessive vibration/noise | Transport bolts not removed, machine not level, uneven load. | Ensure transport bolts are removed, level the machine, redistribute laundry evenly. |
| Clothes not clean | Overloading, insufficient detergent, incorrect program selection. | Reduce load size, use correct detergent amount, select appropriate program. |
KidLock Safety Feature
The KidLock feature provides a safety lock for children, preventing accidental changes to settings or opening the door during operation. Refer to the control panel instructions for activation/deactivation.
Icon representing the KidLock safety feature.
Technical Specifications
| Feature | Specification |
|---|---|
| Brand | Cecotec |
| Model | Bolero DressCode 8200 Inverter Steel |
| Model Number | 02324 |
| Capacity | 8 Kilograms |
| Maximum Spin Speed | 1400 rpm |
| Motor Type | Inverter Plus |
| Number of Programs | 16 |
| Energy Efficiency Rating | B |
| Water Consumption per Cycle | 48 L |
| Energy Consumption per 100 Cycles | 55 kWh |
| Dimensions (Depth x Width x Height) | 56.5 cm x 59.5 cm x 85 cm |
| Weight | 68 Kilograms |
| Control Type | Push Button |
| Loading Type | Front Load |
Warranty and Customer Support
Warranty Information
Please refer to the warranty card included with your purchase or contact your retailer for detailed warranty terms and conditions. Keep your proof of purchase for warranty claims.
Customer Support
For technical assistance, spare parts, or any questions regarding your Cecotec washing machine, please contact Cecotec customer service. Contact details can typically be found on the official Cecotec website or in your purchase documentation.
You can visit the official Cecotec store for more information: Cecotec Store
