Pulsar 30-Amp Parallel Kit Instruction Manual

1. Introduction

Thank you for choosing the Pulsar 30-Amp Parallel Kit (PGiPAIRB2). This kit is designed to connect two compatible Pulsar inverter generators, effectively doubling their power output to meet higher energy demands. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your parallel kit.

By linking two compatible generators, you can achieve greater power without the need for a single, larger, and heavier generator, making it ideal for RVs, tailgating, and powering multiple tools.

Visual examples demonstrating the versatility of Pulsar inverter generators and the parallel kit, suitable for various applications such as powering tools, recreational activities like tailgating, and providing power for RVs.

2. Safety Information

Always read and understand the safety warnings in your generator's manual before operating the parallel kit. Failure to follow these instructions can result in serious injury or death.

• Ensure both generators are turned OFF and cooled down before connecting or disconnecting the parallel kit.
• Do not operate the parallel kit in wet conditions.
• Always use the kit with compatible inverter generators as specified by Pulsar.
• Keep children and pets away from operating generators and the parallel kit.
• Ensure proper ventilation when operating generators to prevent carbon monoxide poisoning.

3. Package Contents

Verify that all items are present in your package:

• Pulsar 30-Amp Parallel Kit (PGiPAIRB2)
• Instruction Manual (this document)

4. Setup and Connection

Follow these steps to properly connect your Pulsar 30-Amp Parallel Kit to two compatible inverter generators:

1. Prepare Generators: Ensure both inverter generators are turned OFF, cooled down, and placed on a stable, level surface in a well-ventilated area.
2. Locate Parallel Ports: Identify the parallel connection ports on each of your compatible Pulsar inverter generators. These are typically labeled.
3. Connect Parallel Kit: Take the two input cables from the parallel kit. Connect one cable to the parallel port of the first generator and the other cable to the parallel port of the second generator. Ensure the connections are secure.
4. Position Kit: Place the parallel kit unit in a safe, dry location, away from direct heat or moisture.
5. Connect Load: Once the generators are running (see Operating Instructions), you can connect your RV or other appliances to the TT-30R RV outlet on the parallel kit.

The Pulsar PGiPAIRB2 30-Amp Parallel Kit, showing the main unit with a 30A RV outlet and the two input cables with ring terminals for connecting to compatible inverter generators.

An example of a compatible Pulsar gasoline inverter generator, highlighting its power output capabilities. This type of generator is designed to work with the parallel kit.

5. Operating Instructions

After connecting the parallel kit, follow these steps to operate your dual generator setup:

1. Start Generators: Start both inverter generators according to their individual operating instructions. Allow them to warm up for a few moments.
2. Verify Operation: Confirm that both generators are running smoothly and producing power.
3. Connect Appliances: Plug your desired appliances or RV power cord into the 30A RV outlet on the parallel kit. Do not overload the combined wattage capacity of your generators.
4. Monitor Load: Periodically check the load on your generators to ensure they are not running beyond their combined rated wattage.
5. Shut Down: To shut down, first disconnect all appliances from the parallel kit. Then, turn off both generators according to their individual shutdown procedures.

A table providing reference wattage values for various common household appliances, useful for calculating power requirements when using the parallel kit with two generators.

6. Maintenance

Proper maintenance ensures the longevity and safe operation of your parallel kit:

• Cleaning: Keep the parallel kit clean and free of dirt, dust, and debris. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.
• Cable Inspection: Regularly inspect the cables and connectors for any signs of wear, fraying, cuts, or damage. Replace the kit if any damage is found.
• Storage: When not in use, store the parallel kit in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your parallel kit, try these common troubleshooting steps:

• No Power Output:
  • Ensure both generators are running correctly and producing power individually.
  • Check that all connections between the parallel kit and the generators are secure.
  • Verify that the appliance or RV is properly plugged into the parallel kit's outlet.
  • Check for tripped circuit breakers on the generators or the parallel kit (if applicable).
• One Generator Not Contributing:
  • Ensure the specific generator is running and its parallel port connection is firm.
  • Consult the individual generator's manual for troubleshooting its power output.
• Overload Indication:
  • Reduce the number of appliances connected to the parallel kit.
  • Ensure the combined wattage of your appliances does not exceed the combined rated wattage of your two generators.

If problems persist after attempting these steps, contact Pulsar customer support.

8. Specifications

Illustrations depicting key operational characteristics of compatible Pulsar inverter generators, including DC and AC output capabilities, typical run time, engine size, and fuel efficiency.

9. Warranty and Support

The Pulsar 30-Amp Parallel Kit (PGiPAIRB2) comes with a 1-Year Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.

For warranty claims, technical support, or any questions regarding your Pulsar product, please contact Pulsar customer service. Have your model number (PGiPAIRB2) and proof of purchase ready when contacting support.

For the most up-to-date support information, please visit the official Pulsar website or refer to the contact details provided with your product packaging.